// Copyright (C) 2001 Leena L�hteenm�ki, Finland
// Copyright (C) 2012 PatternMaker Software
// 2011/11/04

double x[600], y[600];
double ang,ang2,vang,vdistance,rangle;
object group_obj[60];
object current_object;
point current_point;
selection current_selection;
double result;

double model,ky,ry,vy,yly,aly,rkkv,rk,vk,sp,sl,op;
double ylk,alk;
double eml, tml, sml, smlyly,smlaly;
double ktk,ktl,ptl,ptp,ptl,pts,rl,pk;
double okt,oke;
double ease, f_ry[3],f_ky[3],f_vy[3],f_yly[3],f_aly[3],f_rkkv[3],f_sl[3];
double f_op[3],f_vk[3],f_rk[3],f_rl[3],f_sp[3],f_ktk[3];
double napit,int;
double nv;
double metric;
double siirtox, siirtoy;
double collar, neck_depth, neck_width;
double sv;
double language;
double tk, ytl, tl;
double index, done, version;
object marker_array[40];
double marker_count, loop;

main()
  {
  language=get_language();

  if ( language != 0 ) { language = 0; }

  if (language == 0)
    {
    check_reg(0, "Leena","L2macros", "This macro needs to be properly installed before running it.");

    }



  ky=39.25;
  ry=96;
  vy=78;
  yly=95;
  aly=102;
  rkkv=21;
  rk=36.8;
  vk=55.4;
  sp=41.3;
  sl=37.6;
  op=13.5;
  ylk=9;
  alk=19;
  nv=2;
  sv=1;

  tl=15;

//Start Options
  while (!done)
    {
    if (index==0)    {   dialog_model();   }
    if (index==1)    {   dialog_ease();   }
    if (index==2)    {   dialog_collar();   }
    if (index==3)    {   dialog_collar_depth();   }
    if (index==4)    {   dialog_collar_width();   }
    }
//End Options

  if (is_function("unit_mode")==1)
    {
    metric = unit_mode();

    if (!metric)
      {
      ky=ky/2.54;
      ry=ry/2.54;
      vy=vy/2.54;
      yly=yly/2.54;
      aly=aly/2.54;
      rkkv=rkkv/2.54;
      vk=vk/2.54;
      sp=sp/2.54;
      sl=sl/2.54;
      op=op/2.54;
      ylk=ylk/2.54;
      alk=alk/2.54;
      rk=rk/2.54;
      sv=sv/2.54;
      tk=tk/2.54;
      tl=tl/2.54;
      ytl=ytl/2.54;
      }
    }

  else
    {
    if (language == 0)
      {
      metric=2*pop_up("UNITS","Inches","Centimeters");

      }



    if (metric<1)
      {
      ky=ky/2.54;
      ry=ry/2.54;
      vy=vy/2.54;
      yly=yly/2.54;
      aly=aly/2.54;
      rkkv=rkkv/2.54;
      vk=vk/2.54;
      sp=sp/2.54;
      sl=sl/2.54;
      op=op/2.54;
      ylk=ylk/2.54;
      alk=alk/2.54;
      rk=rk/2.54;
      sv=sv/2.54;
      tk=tk/2.54;
      tl=tl/2.54;
      ytl=ytl/2.54;
      }
    }

  if(metric==0)
    {
    sv=0.39;
    }

  double read;
  read = 0;

  if (is_function("measure_table")==1)
    {
    if (measure_table("default_women")==1)
      {
      read = 1;
      }
    }

  if (read==0)
    {
    if (is_function("start_picture_input"))
      {
      if (language == 0)
        {
        start_picture_input("LADIES' VEST");

        }


      if (language == 0)
        {
        add_picture_input("Neck circumference",ky, "w_meas_neckcirc");

        }

      if (language == 0)
        {
        add_picture_input("Bust circumference", ry, "w_meas_bustcirc");

        }

      if (language == 0)
        {
        add_picture_input("Waist circumference", vy, "w_meas_waistcirc");

        }

      if (language == 0)
        {
        add_picture_input("Abdomen circumference",yly, "w_meas_abdmcirc");

        }

      if (language == 0)
        {
        add_picture_input("Hip circumference",aly, "w_meas_hipcirc");

        }

      if (language == 0)
        {
        add_picture_input("Bust span", rkkv, "w_meas_bustspan");

        }

      if (language == 0)
        {
        add_picture_input("Bust height",rk, "w_meas_bustht");

        }

      if (language == 0)
        {
        add_picture_input("Waist height",vk, "w_meas_waistht");

        }

      if (language == 0)
        {
        add_picture_input("Back length",sp, "w_meas_bklength");

        }

      if (language == 0)
        {
        add_picture_input("Back width",sl, "w_meas_bkwidth");

        }

      if (language == 0)
        {
        add_picture_input("Shoulder length",op, "w_meas_shldr");

        }

      if (language == 0)
        {
        add_picture_input("Waist - Abdomen",ylk, "w_meas_waist-abdm");

        }

      if (language == 0)
        {
        add_picture_input("Waist - Hip",alk, "w_meas_waist-hip");

        }

      run_picture_input();
      }

    else
      {
      if (language == 0)
        {
        dialog_box( "LADIES' VEST, 1 of 2",
                    "Neck circumference",ky,
                    "Bust circumference", ry,
                    "Waist circumference", vy,
                    "Abdomen circumference",yly,
                    "Hip circumference",aly,
                    "Bust span", rkkv,
                    "Bust height",rk,
                    "Waist height",vk,
                    "Back length",sp,
                    "Back width",sl);

        }



      if (language == 0)
        {
        dialog_box("LADIES' VEST, 2 of 2",
                   "Shoulder length",op,
                   "Waist - Abdomen",ylk,
                   "Waist - Hip",alk);


        }
      }

    if (is_function("start_picture_input"))
      {
      if (language == 0)
        {
        start_picture_input("CUSTOM MEASUREMENTS");

        }



      }

    if (language == 0)
      {
      add_picture_input("Pocket width", tl,"w_meas_pocket_width");

      }

    if (language == 0)
      {
      add_picture_input("Seam Allowance", sv, "meas_seamallow");

      }

    run_picture_input();
    }

  else
    {
    if (language == 0)
      {
      dialog_box( "CUSTOM MEASUREMENTS",
                  "Pocket width", tl,
                  "Seam Allowance",sv);

      }



    }

  if (is_function("unit_mode")==1)
    {
    metric = unit_mode();

    if (!metric)
      {
      ky=ky*2.54;
      ry=ry*2.54;
      vy=vy*2.54;
      yly=yly*2.54;
      aly=aly*2.54;
      rkkv=rkkv*2.54;
      vk=vk*2.54;
      sp=sp*2.54;
      sl=sl*2.54;
      op=op*2.54;
      ylk=ylk*2.54;
      alk=alk*2.54;
      rk=rk*2.54;
      tk=tk*2.54;
      tl=tl*2.54;
      ytl=ytl*2.54;
      }
    }

  else
    {
    if (metric<1)
      {
      ky=ky*2.54;
      ry=ry*2.54;
      vy=vy*2.54;
      yly=yly*2.54;
      aly=aly*2.54;
      rkkv=rkkv*2.54;
      vk=vk*2.54;
      sp=sp*2.54;
      sl=sl*2.54;
      op=op*2.54;
      ylk=ylk*2.54;
      alk=alk*2.54;
      rk=rk*2.54;
      tk=tk*2.54;
      tl=tl*2.54;
      ytl=ytl*2.54;
      }
    }

  if(metric==2)
    {
    sv=sv/2.54;
    }

  if (ry < 76)
    {
    oke=4.6;
    }

  else
    {
    if (ry < 80)
      {
      oke=4.4;
      }

    else
      {
      if (ry < 84)
        {
        oke=4.2;
        }

      else
        {
        if (ry < 88)
          {
          oke=4.0;
          }

        else
          {
          if (ry < 92)
            {
            oke=3.8;
            }

          else
            {
            if (ry < 96)
              {
              oke=3.6;
              }

            else
              {
              if (ry < 100)
                {
                oke=3.4;
                }

              else
                {
                if (ry < 104)
                  {
                  oke=3.2;
                  }

                else
                  {
                  if (ry < 110)
                    {
                    oke=3.0;
                    }

                  else
                    {
                    if (ry < 116)
                      {
                      oke=2.8;
                      }

                    else
                      {
                      if (ry < 122)
                        {
                        oke=2.6;
                        }

                      else
                        {
                        oke=2.4;
                        }
                      }
                    }
                  }
                }
              }
            }
          }
        }
      }
    }

  if(ry < 76)
    {
    okt=2.35;
    }

  else
    {
    if (ry < 80)
      {
      okt=2.4;
      }

    else
      {
      if (ry < 84)
        {
        okt=2.45;
        }

      else
        {
        if (ry < 88)
          {
          okt=2.5;
          }

        else
          {
          if (ry < 92)
            {
            okt=2.55;
            }

          else
            {
            if (ry < 96)
              {
              okt=2.6;
              }

            else
              {
              if (ry < 100)
                {
                okt=2.65;
                }

              else
                {
                if (ry < 104)
                  {
                  okt=2.7;
                  }

                else
                  {
                  if (ry < 110)
                    {
                    okt=2.75;
                    }

                  else
                    {
                    if (ry < 116)
                      {
                      okt=2.8;
                      }

                    else
                      {
                      if (ry < 122)
                        {
                        okt=2.85;
                        }

                      else
                        {
                        okt=2.9;
                        }
                      }
                    }
                  }
                }
              }
            }
          }
        }
      }
    }

  if (ry < 76)
    {
    rl=4.3;
    }

  else
    {
    if (ry < 80)
      {
      rl=5.1;
      }

    else
      {
      if (ry < 84)
        {
        rl=5.8;
        }

      else
        {
        if (ry < 88)
          {
          rl=6.6;
          }

        else
          {
          if (ry < 92)
            {
            rl=7.3;
            }

          else
            {
            if (ry < 96)
              {
              rl=8.1;
              }

            else
              {
              if (ry < 100)
                {
                rl=8.8;
                }

              else
                {
                if (ry < 104)
                  {
                  rl=9.6;
                  }

                else
                  {
                  if (ry < 110)
                    {
                    rl=10.8;
                    }

                  else
                    {
                    if (ry < 116)
                      {
                      rl=12.1;
                      }

                    else
                      {
                      if (ry < 122)
                        {
                        rl=13.3;
                        }

                      else
                        {
                        rl=14.6;
                        }
                      }
                    }
                  }
                }
              }
            }
          }
        }
      }
    }

  if (ry < 76)
    {
    ktk=20.4;
    }

  else
    {
    if (ry < 80)
      {
      ktk=20.8;
      }

    else
      {
      if (ry < 84)
        {
        ktk=21.2;
        }

      else
        {
        if (ry < 88)
          {
          ktk=21.6;
          }

        else
          {
          if (ry < 92)
            {
            ktk=22;
            }

          else
            {
            if (ry < 96)
              {
              ktk=22.4;
              }

            else
              {
              if (ry < 100)
                {
                ktk=22.8;
                }

              else
                {
                if (ry < 104)
                  {
                  ktk=23.2;
                  }

                else
                  {
                  if (ry < 110)
                    {
                    ktk=23.8;
                    }

                  else
                    {
                    if (ry < 116)
                      {
                      ktk=24.4;
                      }

                    else
                      {
                      if (ry < 122)
                        {
                        ktk=25;
                        }

                      else
                        {
                        ktk=25.6;
                        }
                      }
                    }
                  }
                }
              }
            }
          }
        }
      }
    }

  f_ry[0]=ry+12;
  f_ky[0]=ky+1.5;
  f_vy[0]=vy+10;
  f_yly[0]=yly+2+8;
  f_aly[0]=aly+2+8;
  f_rkkv[0]=rkkv+1.2;
  f_sl[0]=sl+2.8;
  f_op[0]=op-2;
  f_vk[0]=vk;
  f_rk[0]=rk;
  f_rl[0]=rl+0.2;
  f_sp[0]=sp;
  f_ktk[0]=ktk+2.5;

  f_ry[1]=ry+10;
  f_ky[1]=ky+0.75;
  f_vy[1]=vy+8;
  f_yly[1]=yly+2+6;
  f_aly[1]=aly+2+6;
  f_rkkv[1]=rkkv+1;
  f_sl[1]=sl+2.2;
  f_op[1]=op-2;
  f_vk[1]=vk;
  f_rk[1]=rk;
  f_rl[1]=rl+0.1;
  f_sp[1]=sp;
  f_ktk[1]=ktk+2;

  f_ry[2]=ry+14;
  f_ky[2]=ky+1.5;
  f_vy[2]=vy+12;
  f_yly[2]=yly+2+10;
  f_aly[2]=aly+2+10;
  f_rkkv[2]=rkkv+1.4;
  f_sl[2]=sl+3.4;
  f_op[2]=op-2;
  f_vk[2]=vk;
  f_rk[2]=rk;
  f_rl[2]=rl+0.3;
  f_sp[2]=sp;
  f_ktk[2]=ktk+3;

  ry=f_ry[ease];
  ky=f_ky[ease];
  vy=f_vy[ease];
  yly=f_yly[ease];
  aly=f_aly[ease];
  rkkv=f_rkkv[ease];
  sl=f_sl[ease];
  op=f_op[ease];
  vk=f_vk[ease];
  rk=f_rk[ease];
  rl=f_rl[ease];
  sp=f_sp[ease];
  ktk=f_ktk[ease];

  pts=ky/5+0.5;
  ptl=ky/5-1;
  ktl=ry/8-1.5;
  eml=3;
  tml=3;
  sml=(ry/2-vy/2)-6;
  smlyly=(ry/2-yly/2)-3;
  smlaly=(ry/2-aly/2);

  if(aly<yly)
    {   aly=yly+5;   }

  ptl=ptl+1;
  pts=pts+6;

  if(collar==1)
    {
    pts=pts+8;
    }

  vy=vy+3;
  yly=yly+2;
  aly=aly+2;

  x[0]=0;
  y[0]=0;

  coord(0,1,0,0);

  coord(1,2,-ry/2,0);

  coord(2,3,0,-ktk);

  coord(2,4,0,-sp);

  coord(4,5,0,-ylk);

  coord(4,6,0,-alk);

  coord(1,7,-sl/2,0);

  coord(7,8,-ktl,0);

  coord(7,9,0,-ktk);
  x[9]=x[9]+1;

  coord(9,10,-ktl,0);
  x[10]=x[10]-2;

  coord(9,11,-ktl/2,0);

  coord(9,12,sl/2,0);

  coord(1,13,0,-sp);

  coord(13,14,0,-ylk);

  coord(13,15,0,-alk);

  coord(13,16,-sl/2-ktl/2,0);

  coord(14,17,-sl/2-ktl/2,0);

  coord(15,18,-sl/2-ktl/2,0);

  coord(3,19,rkkv/2,0);

  coord(4,20,rkkv/2,0);

  coord(1,21,0,.5);

  coord(1,22,-ptl,2.5);

  coord(22,122,0,-2.5);

  coord(2,23,ptl,0);

  coord(1,24,0,-okt);

  coord(24,124,-100,0);

  coord(1,25,0,-oke);

  coord(25,125,-100,0);

  coord(22,26,-sqrt((op+2)*(op+2)-(okt+2.5)*(okt+2.5)),-(okt+2.5));

  coord(23,123,0,100);

  cont(26,22,27,-4);

  coord(1,28,-rkkv/2,-7);

  cont(28,27,127,.6);

  cont(26,22,29,-6);

  double ang;
  ang=angle(x[28],y[28],x[27],y[27])-angle(x[28],y[28],x[29],y[29]);
  rotate(129,28,-ang);

  coord(20,30,0,vk-rk);

  init_xarc_array();
  ptp=arclength(21,122,22);

  coord(30,31,-rkkv/2+ptl,sqrt((rk-ptp)*(rk-ptp)-(rkkv/2-ptl)*(rkkv/2-ptl)));
  coord(31,23,0,-pts);

  coord(31,32,0,0);
  double ang;
  ang=angle(x[30],y[30],x[31],y[31])-angle(x[30],y[30],x[31]+rl,y[31]);
  rotate(32,30,-ang);

  x[223]=x[32];
  y[223]=y[25];
  oke=dist(32,223);

  coord(32,33,sqrt(op*op-oke*oke),-oke);

  cont(33,31,131,-4);

  cont(33,32,132,-4);

  cont(132,30,132,-dist(30,132));

  coord(10,34,0,ktk/4);

  coord(10,36,0,ktk/2);

  coord(9,35,0,ktk/3);

  coord(9,37,0,2*ktk/3);
  y[9]=y[9]+2;

  coord(6,38,rkkv/2,0);

  coord(38,39,0,(alk-ylk)/2);

  coord(20,40,-eml/2,0);

  coord(20,41,eml/2,0);

  coord(15,42,-rkkv/2,0);

  coord(42,43,0,(alk-ylk)/2);

  coord(13,44,-rkkv/2-tml/2,0);

  coord(12,45,-rkkv/2,-2);

  coord(44,46,tml,0);

  coord(18,47,smlaly/2,0);

  coord(17,48,smlyly/2,0);

  coord(16,49,sml/2,0);

  coord(16,50,-sml/2,0);

  coord(17,51,-smlyly/2,0);

  coord(18,52,-smlaly/2,0);

  cont(51,50,151,-3);
  cont(11,50,111,-3);

  cont(11,49,149,-3);
  cont(48,49,148,-3);

  cont(50,11,310,-4);

  coord(310,311,0,0);

  cont(33,31,131,-5);

  cont(33,32,132,-5);
  cont(131,30,131,-dist(30,132));

  cont(26,22,27,-5);

  cont(28,27,127,.6);

  cont(26,22,29,-7);

  coord(127,129,0,0);
  double ang;
  ang=angle(x[28],y[28],x[27],y[27])-angle(x[28],y[28],x[29],y[29]);
  rotate(129,28,-ang);

  tk=2;

  coord(20,140,0,-4);

  coord(140,141,-4,0);

  coord(141,143,0,-tk);

  center(141,143,142);

  coord(140,144,0,-tk);

  center(140,144,150);

  coord(141,153,0,-6);

  coord(153,152,0,3);

  coord(153,154,3,0);

  coord(140,155,0,-6);

  coord(141,147,tl,0);

  coord(143,145,tl,0);

  center(145,147,146);

  coord(140,448,0,0);

  coord(448,449,0,-tk);

  center(448,449,451);

  coord(448,156,0,-6);

  coord(147,158,0,-6);

  coord(158,159,0,3);

  coord(158,157,-3,0);

  cont(33,31,513,-4);
  coord(5,516,nv,0);
  coord(6,514,0,0);
  coord(6,515,nv,0);
  coord(3,517,nv,0);

  line_intersect(48,14,43,44,519);

  line_intersect(48,14,43,46,520);

  if(neck_depth==1)
    {
    y[23]=y[23]+3;
    }

  if(neck_depth==2)
    {
    y[23]=y[23]-6;
    }

  cont(132,33,521,-5);

  coord(36,522,-5,0);

  coord(34,523,-5,0);

  cont(50,11,524,-5);

  x[525]=x[523];
  y[525]=y[524];

  cont(129,26,526,-5);

  coord(37,527,+5,0);

  coord(35,528,+5,0);

  cont(49,11,529,-5);

  x[530]=x[528];
  y[530]=y[529];

  if(model==0)
    {
    Draw_princess_CF();
    Draw_princess_front_side();
    Draw_princess_back_side();
    Draw_princess_CB();
    }

  if(model==1)
    {
    Draw_straight_front();
    Draw_straight_back();
    }

  current_selection=newselection("OBJECT");

  for (loop = 0; loop < 20; loop = loop + 1)
    {
    if (marker_array[loop] != 0)
      {
      select(current_selection, marker_array[loop]);
      }
    }

  check_overlap(current_selection);

  if (is_function("origin_arrange")==1)
    {
    origin_arrange(current_selection);
    }

  deselect(current_selection);

  if (is_function("set_marker")==1)
    {
    for (loop = 0; loop < 20; loop = loop + 1)
      {
      if (marker_array[loop] != 0)
        {
        set_marker(marker_array[loop], 0);
        }
      }
    }

  run_command("zoomall");
  }

Draw_princess_CF()
  {

  current_object=newobject("poly");
  addpoint((x[140]-1.5+siirtox)/2.54, (y[140])/2.54, "LINE");
  addpoint((x[141]-.5+siirtox)/2.54, (y[141])/2.54, "LINE");
  addpoint((x[143]-.5+siirtox)/2.54, (y[143] )/2.54, "LINE");
  addpoint((x[144]-1+siirtox)/2.54, (y[144])/2.54, "Open");
  group_obj[30]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Pocket",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[141]+siirtox)/2.54, (y[141]-1)/2.54, "line");
  group_obj[31]=current_object;

  if(collar==0)
    {

    int=(dist(23,5)-4)/4;

    current_object=newobject("poly");
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-2*int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-3*int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-4*int)/2.54, "OPEN");
    notch_type(current_point,"BTN",0);
    group_obj[28]=current_object;
    }

  if(collar==1)
    {

    int=(dist(23,5)-4)/3;

    current_object=newobject("poly");
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-2*int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-3*int)/2.54, "open");
    notch_type(current_point,"BTN",0);
    group_obj[29]=current_object;
    }

  current_object=newobject("poly");

  if(collar==0)
    {
    addpoint((x[131]+siirtox)/2.54, (y[131])/2.54, "line");
    addpoint((x[31]+siirtox)/2.54, (y[31])/2.54, "xarc_start");
    addpoint((x[31]+siirtox)/2.54, (y[23])/2.54, "xarc_corner");
    addpoint((x[3]+siirtox)/2.54, (y[23])/2.54, "line");
    addpoint((x[3]-nv+siirtox)/2.54, (y[23])/2.54, "line");
    }

  else
    {
    addpoint((x[131]+siirtox)/2.54, (y[131])/2.54, "line");
    addpoint((x[31]+siirtox)/2.54, (y[31])/2.54, "xarc_start");
    addpoint((x[31]-5+siirtox)/2.54, (y[23]+5)/2.54, "xarc_corner");
    addpoint((x[3]-nv+siirtox)/2.54, (y[23])/2.54, "line");
    }

  current_point=  addpoint((x[3]-nv+siirtox)/2.54, (y[3])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  current_point=  addpoint((x[4]-nv+siirtox)/2.54, (y[4])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  current_point=  addpoint((x[5]-nv+siirtox)/2.54, (y[5])/2.54, "xarc_start");
  notch_type(current_point,"NOTCH",1);
  addpoint((x[5]+siirtox)/2.54, (y[5])/2.54, "xarc_corner");
  addpoint((x[39]+siirtox)/2.54, (y[39]-5)/2.54, "line");
  addpoint((x[39]+siirtox)/2.54, (y[39])/2.54, "line");
  current_point=addpoint((x[40]+siirtox)/2.54, (y[40])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint((x[30]+siirtox)/2.54, (y[30])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  group_obj[1]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Front Center piece, CF, Cut 2",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[4]+.2+siirtox)/2.54, (y[3])/2.54, "line");
  group_obj[2]=current_object;

  if(sv>0)
    {

    offset_mark(1);
    select(current_selection,group_obj[2]);

    if(collar==0)
      {
      select(current_selection,group_obj[28]);
      }

    if(collar==1)
      {
      select(current_selection,group_obj[29]);
      }

    select(current_selection,group_obj[30]);
    select(current_selection,group_obj[31]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(1);

    current_selection=newselection("object");
    select(current_selection,group_obj[1]);
    select(current_selection,group_obj[2]);

    if(collar==0)
      {
      select(current_selection,group_obj[28]);
      }

    if(collar==1)
      {
      select(current_selection,group_obj[29]);
      }

    select(current_selection,group_obj[30]);
    select(current_selection,group_obj[31]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtoy=sp+alk;

  current_object=newobject("poly");
  addpoint((x[141]+siirtox)/2.54, (y[141]+siirtoy)/2.54, "LINE");
  addpoint((x[143]+siirtox)/2.54, (y[143]-2+siirtoy)/2.54, "LINE");
  addpoint((x[145]+siirtox)/2.54, (y[145]-2+siirtoy)/2.54, "LINE");
  addpoint((x[147]+siirtox)/2.54, (y[147]+siirtoy)/2.54, "line");
  group_obj[32]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Pocket velt, Cut 2",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[141]+1+siirtox)/2.54, (y[141]-1+siirtoy)/2.54, "line");
  group_obj[33]=current_object;

  current_object=newobject("poly");
  addpoint((x[143]+siirtox)/2.54, (y[143]+siirtoy)/2.54, "LINE");
  addpoint((x[145]+siirtox)/2.54, (y[145]+siirtoy)/2.54, "line");
  group_obj[34]=current_object;

  if(sv>0)
    {

    offset_mark(32);
    select(current_selection,group_obj[33]);
    select(current_selection,group_obj[34]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(32);
    current_selection=newselection("object");
    select(current_selection,group_obj[32]);
    select(current_selection,group_obj[33]);
    select(current_selection,group_obj[34]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=24;

  current_object=newobject("poly");
  addpoint((x[141]+siirtox)/2.54, (y[141]+siirtoy)/2.54, "LINE");
  addpoint((x[141]+siirtox)/2.54, (y[39]+1+siirtoy)/2.54, "LINE");
  addpoint((x[145]+4+siirtox)/2.54, (y[51]+siirtoy)/2.54, "LINE");
  addpoint((x[147]+4+siirtox)/2.54, (y[147]+siirtoy)/2.54, "line");
  group_obj[35]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Pocket bag, Cut 2",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[141]+1+siirtox)/2.54, (y[141]-1+siirtoy)/2.54, "line");
  group_obj[36]=current_object;

  if(sv>0)
    {

    offset_mark(35);
    select(current_selection,group_obj[36]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(35);

    current_selection=newselection("object");
    select(current_selection,group_obj[35]);
    select(current_selection,group_obj[36]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=0;
  siirtoy=0;
  }

Draw_princess_front_side()
  {
  siirtox=2;

  current_object=newobject("poly");
  addpoint((x[132]+siirtox)/2.54, (y[132])/2.54, "xarc_start");
  cont(132,30,130,-2);
  x[130]=x[30];
  addpoint((x[130]+siirtox)/2.54, (y[130])/2.54, "xarc_corner");
  cont(41,30,230,-2);
  current_point=addpoint((x[30]+siirtox)/2.54, (y[30])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  addpoint((x[230]+siirtox)/2.54, (y[230])/2.54, "line");
  current_point=addpoint((x[41]+siirtox)/2.54, (y[41])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  addpoint((x[39]+siirtox)/2.54, (y[39])/2.54, "line");
  addpoint((x[39]+siirtox)/2.54, (y[39]-5)/2.54, "xarc_start");
  addpoint((x[38]+5+siirtox)/2.54, (y[51])/2.54, "xarc_corner");
  addpoint((x[51]+siirtox)/2.54, (y[51])/2.54, "line");
  addpoint((x[151]+siirtox)/2.54, (y[151])/2.54, "line");
  addpoint((x[111]+siirtox)/2.54, (y[111])/2.54, "line");
  addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "xarc_start");
  addpoint((x[10]+siirtox)/2.54, (y[10])/2.54, "xarc_corner");
  addpoint((x[34]+siirtox)/2.54, (y[34])/2.54, "xarc_start");
  addpoint((x[36]+siirtox)/2.54, (y[36])/2.54, "xarc_corner");
  addpoint((x[33]+siirtox)/2.54, (y[33])/2.54, "line");
  group_obj[6]=current_object;

  current_object=newobject("poly");
  addpoint((x[10]-5+siirtox)/2.54, (y[10]-5)/2.54, "line");
  addpoint((x[10]-5+siirtox)/2.54, (y[51])/2.54, "open");
  group_obj[7]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Front side piece, Grainline, cut 2",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[10]-5+.2+siirtox)/2.54, (y[10]-5)/2.54, "line");
  group_obj[8]=current_object;

  if(sv>0)
    {

    offset_mark(6);
    select(current_selection,group_obj[7]);
    select(current_selection,group_obj[8]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(6);
    current_selection=newselection("object");
    select(current_selection,group_obj[6]);
    select(current_selection,group_obj[7]);
    select(current_selection,group_obj[8]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=dist(40,13)+2;
  current_object=newobject("poly");
  addpoint((x[521]+siirtox)/2.54, (y[521])/2.54, "xarc_start");
  addpoint((x[522]+siirtox)/2.54, (y[522])/2.54, "xarc_corner");
  addpoint((x[523]+siirtox)/2.54, (y[523])/2.54, "xarc_start");
  addpoint((x[525]+siirtox)/2.54, (y[525])/2.54, "xarc_corner");
  addpoint((x[524]+siirtox)/2.54, (y[524])/2.54, "line");
  addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "xarc_start");
  addpoint((x[10]+siirtox)/2.54, (y[10])/2.54, "xarc_corner");
  addpoint((x[34]+siirtox)/2.54, (y[34])/2.54, "xarc_start");
  addpoint((x[36]+siirtox)/2.54, (y[36])/2.54, "xarc_corner");
  addpoint((x[33]+siirtox)/2.54, (y[33])/2.54, "line");
  group_obj[9]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Armscye facing, front",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[10]-1+siirtox)/2.54, (y[11])/2.54, "line");
  group_obj[40]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Cut 2",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[10]-1+siirtox)/2.54, (y[11]-2)/2.54, "line");
  group_obj[48]=current_object;
  siirtox=0;

  if(sv>0)
    {

    offset_mark(9);
    select(current_selection,group_obj[40]);
    select(current_selection,group_obj[48]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(9);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[9]);
    select(current_selection,group_obj[40]);
    select(current_selection,group_obj[48]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=0;
  }

Draw_straight_front()
  {

  current_object=newobject("poly");
  addpoint((x[147]-.5+siirtox)/2.54, (y[140])/2.54, "LINE");
  addpoint((x[141]-.5+siirtox)/2.54, (y[141])/2.54, "LINE");
  addpoint((x[143]-.5+siirtox)/2.54, (y[143] )/2.54, "LINE");
  addpoint((x[145]-.5+siirtox)/2.54, (y[144])/2.54, "line");
  group_obj[30]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Pocket",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[141]+siirtox)/2.54, (y[141]-1)/2.54, "line");
  group_obj[31]=current_object;

  if(collar==0)
    {

    int=(dist(23,5)-4)/4;

    current_object=newobject("poly");
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-2*int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-3*int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-4*int)/2.54, "OPEN");
    notch_type(current_point,"BTN",0);
    group_obj[28]=current_object;
    }

  if(collar==1)
    {

    int=(dist(23,5)-4)/3;

    current_object=newobject("poly");
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-2*int)/2.54, "line");
    notch_type(current_point,"BTN",0);
    current_point=addpoint((x[3]+siirtox)/2.54, (y[23]-2-3*int)/2.54, "open");
    notch_type(current_point,"BTN",0);
    group_obj[29]=current_object;
    }

  ang=angle(x[30],y[30],x[131],y[131])-angle(x[30],y[30],x[132],y[132]);
  rotate(132,30,ang);
  rotate(33,30,ang);
  rotate(36,30,ang);
  rotate(34,30,ang);
  rotate(10,30,ang);
  rotate(11,30,ang);
  rotate(310,30,ang);
  rotate(507,30,ang);
  rotate(521,30,ang);
  rotate(522,30,ang);
  rotate(523,30,ang);
  rotate(524,30,ang);
  rotate(525,30,ang);

  current_object=newobject("poly");

  if(collar==0)
    {
    addpoint((x[131]+siirtox)/2.54, (y[131])/2.54, "line");
    addpoint((x[31]+siirtox)/2.54, (y[31])/2.54, "xarc_start");
    addpoint((x[31]+siirtox)/2.54, (y[23])/2.54, "xarc_corner");
    addpoint((x[3]+siirtox)/2.54, (y[23])/2.54, "line");
    addpoint((x[3]-nv+siirtox)/2.54, (y[23])/2.54, "line");
    }

  if(collar==1)
    {
    addpoint((x[131]+siirtox)/2.54, (y[131])/2.54, "line");
    addpoint((x[31]+siirtox)/2.54, (y[31])/2.54, "xarc_start");
    addpoint((x[31]-5+siirtox)/2.54, (y[23]+5)/2.54, "xarc_corner");
    addpoint((x[3]+siirtox)/2.54, (y[23])/2.54, "line");
    addpoint((x[3]-nv+siirtox)/2.54, (y[23])/2.54, "line");
    }

  current_point=  addpoint((x[3]-nv+siirtox)/2.54, (y[3])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  current_point=  addpoint((x[4]-nv+siirtox)/2.54, (y[4])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint((x[5]-nv+siirtox)/2.54, (y[5])/2.54, "xarc_start");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint((x[5]+siirtox)/2.54, (y[5])/2.54, "xarc_corner");
  addpoint((x[39]+siirtox)/2.54, (y[39]-5)/2.54, "xarc_start");
  addpoint((x[39]+5+siirtox)/2.54, (y[51])/2.54, "xarc_corner");
  addpoint((x[51]+siirtox)/2.54, (y[51])/2.54, "line");
  addpoint((x[151]+siirtox)/2.54, (y[151])/2.54, "line");
  addpoint((x[111]+siirtox)/2.54, (y[111])/2.54, "line");
  addpoint((x[311]+siirtox)/2.54, (y[311])/2.54, "line");
  addpoint((x[30]+2+siirtox)/2.54, (y[30])/2.54, "line");
  addpoint((x[310]+siirtox)/2.54, (y[310])/2.54, "line");
  addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "xarc_start");
  addpoint((x[10]+siirtox)/2.54, (y[10])/2.54, "xarc_corner");
  addpoint((x[34]+siirtox)/2.54, (y[34])/2.54, "xarc_start");
  addpoint((x[36]+siirtox)/2.54, (y[36])/2.54, "xarc_corner");
  addpoint((x[33]+siirtox)/2.54, (y[33])/2.54, "line");
  group_obj[10]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Front Piece, CF, Cut 2",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[4]+.2+siirtox)/2.54, (y[23]-2)/2.54, "line");
  group_obj[11]=current_object;

  current_object=newobject("poly");
  addpoint((x[30]+siirtox)/2.54, (y[30]-2)/2.54, "line");
  addpoint((x[41]+siirtox)/2.54, (y[41])/2.54, "line");
  addpoint((x[39]+siirtox)/2.54, (y[39])/2.54, "line");
  addpoint((x[40]+siirtox)/2.54, (y[40])/2.54, "line");
  group_obj[12]=current_object;

  current_object=newobject("poly");
  addpoint((x[131])/2.54, (y[131])/2.54, "xarc_start");
  addpoint((x[3]+nv)/2.54, (y[30])/2.54, "xarc_corner");
  addpoint((x[515])/2.54, (y[39])/2.54, "open");
  group_obj[51]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Cut here for Front Facing",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[516]+.2+siirtox)/2.54, (y[4])/2.54, "line");
  group_obj[52]=current_object;

  if(sv>0)
    {

    offset_mark(10);
    select(current_selection,group_obj[11]);
    select(current_selection,group_obj[12]);

    select(current_selection,group_obj[51]);
    select(current_selection,group_obj[52]);

    if(collar==0)
      {
      select(current_selection,group_obj[28]);
      }

    if(collar==1)
      {
      select(current_selection,group_obj[29]);
      }

    select(current_selection,group_obj[30]);
    select(current_selection,group_obj[31]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(10);
    current_selection=newselection("object");
    select(current_selection,group_obj[10]);
    select(current_selection,group_obj[11]);
    select(current_selection,group_obj[12]);

    select(current_selection,group_obj[51]);
    select(current_selection,group_obj[52]);

    if(collar==0)
      {
      select(current_selection,group_obj[28]);
      }

    if(collar==1)
      {
      select(current_selection,group_obj[29]);
      }

    select(current_selection,group_obj[30]);
    select(current_selection,group_obj[31]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=dist(40,13)+2;
  current_object=newobject("poly");
  addpoint((x[521]+siirtox)/2.54, (y[521])/2.54, "xarc_start");
  addpoint((x[522]+siirtox)/2.54, (y[522])/2.54, "xarc_corner");
  addpoint((x[523]+siirtox)/2.54, (y[523])/2.54, "xarc_start");
  addpoint((x[525]+siirtox)/2.54, (y[525])/2.54, "xarc_corner");
  addpoint((x[524]+siirtox)/2.54, (y[524])/2.54, "line");
  addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "xarc_start");
  addpoint((x[10]+siirtox)/2.54, (y[10])/2.54, "xarc_corner");
  addpoint((x[34]+siirtox)/2.54, (y[34])/2.54, "xarc_start");
  addpoint((x[36]+siirtox)/2.54, (y[36])/2.54, "xarc_corner");
  addpoint((x[33]+siirtox)/2.54, (y[33])/2.54, "line");
  group_obj[14]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Armscye Facing, Front",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[10]-1+siirtox)/2.54, (y[11]-2)/2.54, "line");
  group_obj[41]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Cut 2",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[10]-1+siirtox)/2.54, (y[11]-3.5)/2.54, "line");
  group_obj[49]=current_object;
  siirtox=0;

  if(sv>0)
    {

    offset_mark(14);
    select(current_selection,group_obj[41]);
    select(current_selection,group_obj[49]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(14);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[14]);
    select(current_selection,group_obj[41]);
    select(current_selection,group_obj[49]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtoy=sp+alk;

  current_object=newobject("poly");
  addpoint((x[141]+siirtox)/2.54, (y[141]+siirtoy)/2.54, "LINE");
  addpoint((x[143]+siirtox)/2.54, (y[143]-2+siirtoy)/2.54, "LINE");
  addpoint((x[145]+siirtox)/2.54, (y[145]-2+siirtoy)/2.54, "LINE");
  addpoint((x[147]+siirtox)/2.54, (y[147]+siirtoy)/2.54, "line");
  group_obj[32]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Pocket velt, Cut 2",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[141]+1+siirtox)/2.54, (y[141]-1+siirtoy)/2.54, "line");
  group_obj[33]=current_object;

  current_object=newobject("poly");
  addpoint((x[143]+siirtox)/2.54, (y[143]+siirtoy)/2.54, "LINE");
  addpoint((x[145]+siirtox)/2.54, (y[145]+siirtoy)/2.54, "line");
  group_obj[34]=current_object;

  if(sv>0)
    {

    offset_mark(32);
    select(current_selection,group_obj[33]);
    select(current_selection,group_obj[34]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(32);
    current_selection=newselection("object");
    select(current_selection,group_obj[32]);
    select(current_selection,group_obj[33]);
    select(current_selection,group_obj[34]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=24;

  current_object=newobject("poly");
  addpoint((x[141]+siirtox)/2.54, (y[141]+siirtoy)/2.54, "LINE");
  addpoint((x[141]+siirtox)/2.54, (y[39]+1+siirtoy)/2.54, "LINE");
  addpoint((x[145]+4+siirtox)/2.54, (y[51]+siirtoy)/2.54, "LINE");
  addpoint((x[147]+4+siirtox)/2.54, (y[147]+siirtoy)/2.54, "line");
  group_obj[35]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Pocket bag, Cut 2",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[141]+1+siirtox)/2.54, (y[141]-1+siirtoy)/2.54, "line");
  group_obj[36]=current_object;

  if(sv>0)
    {

    offset_mark(35);
    select(current_selection,group_obj[36]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(35);
    current_selection=newselection("object");
    select(current_selection,group_obj[35]);
    select(current_selection,group_obj[36]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=0;
  siirtoy=0;

  rotate(132,30,-ang);
  rotate(33,30,-ang);
  rotate(36,30,-ang);
  rotate(34,30,-ang);
  rotate(10,30,-ang);
  rotate(11,30,-ang);
  rotate(310,30,-ang);
  rotate(507,30,-ang);
  rotate(521,30,-ang);
  rotate(522,30,-ang);
  rotate(523,30,-ang);
  rotate(524,30,-ang);
  rotate(525,30,-ang);
  }

Draw_princess_back_side()
  {
  siirtox=4;

  current_object=newobject("poly");
  addpoint((x[9]+2+siirtox)/2.54, (y[10]-5)/2.54, "line");
  addpoint((x[9]+2+siirtox)/2.54, (y[51])/2.54, "open");
  group_obj[4]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Back Side piece, Cut 2, Grainline",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[9]+2.2+siirtox)/2.54, (y[10]-5)/2.54, "line");
  group_obj[5]=current_object;

  current_object=newobject("poly");
  current_point=addpoint((x[48]+siirtox)/2.54, (y[48])/2.54, "line");
  current_point=addpoint((x[148]+siirtox)/2.54, (y[148])/2.54, "xarc_start");
  current_point=addpoint((x[49]+siirtox)/2.54, (y[49])/2.54, "xarc_corner");
  current_point=addpoint((x[149]+siirtox)/2.54, (y[149])/2.54, "line");
  addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "xarc_start");
  addpoint((x[9]+siirtox)/2.54, (y[9])/2.54, "xarc_corner");
  addpoint((x[35]+siirtox)/2.54, (y[35])/2.54, "xarc_start");
  addpoint((x[37]+siirtox)/2.54, (y[37])/2.54, "xarc_corner");
  addpoint((x[26]+siirtox)/2.54, (y[26])/2.54, "line");
  addpoint((x[129]+siirtox)/2.54, (y[129])/2.54, "xarc_start");
  addpoint((x[28]+siirtox)/2.54, (y[28])/2.54, "xarc_corner");
  current_point=addpoint((x[45]+siirtox)/2.54, (y[45])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  current_point=  addpoint((x[44]+siirtox)/2.54, (y[44])/2.54, "line");
  notch_type(current_point,"NOTCH",1);
  addpoint((x[520]+siirtox)/2.54, (y[520])/2.54, "line");
  group_obj[15]=current_object;

  if(sv>0)
    {

    offset_mark(15);
    select(current_selection,group_obj[5]);
    select(current_selection,group_obj[4]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(15);
    current_selection=newselection("object");
    select(current_selection,group_obj[4]);
    select(current_selection,group_obj[5]);
    select(current_selection,group_obj[15]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=dist(40,13)+4;
  current_object=newobject("poly");
  addpoint((x[526]+siirtox)/2.54, (y[526])/2.54, "XARC_START");
  addpoint((x[527]+siirtox)/2.54, (y[527])/2.54, "XARC_CORNER");
  addpoint((x[528]+siirtox)/2.54, (y[528])/2.54, "XARC_START");
  addpoint((x[530]+siirtox)/2.54, (y[530])/2.54, "XARC_CORNER");
  addpoint((x[529]+siirtox)/2.54, (y[529])/2.54, "line");
  addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "XARC_START");
  addpoint((x[9]+siirtox)/2.54, (y[9])/2.54, "XARC_CORNER");
  addpoint((x[35]+siirtox)/2.54, (y[35])/2.54, "XARC_START");
  addpoint((x[37]+siirtox)/2.54, (y[37])/2.54, "XARC_CORNER");
  addpoint((x[26]+siirtox)/2.54, (y[26])/2.54, "line");
  group_obj[16]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Armscye facing, back",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[11]+1+siirtox)/2.54, (y[11]-3)/2.54, "line");
  group_obj[42]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Cut 2",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[11]+1+siirtox)/2.54, (y[11]-4)/2.54, "line");
  group_obj[46]=current_object;
  siirtox=0;

  siirtox=0;

  if(sv>0)
    {

    offset_mark(16);
    select(current_selection,group_obj[42]);
    select(current_selection,group_obj[46]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(16);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[16]);
    select(current_selection,group_obj[42]);
    select(current_selection,group_obj[46]);
    group(current_selection);
    deselect(current_selection);
    }
  }
Draw_princess_CB()
  {
  siirtox=6;

  current_object=newobject("poly");
  current_point=addpoint((x[520]+siirtox)/2.54, (y[520])/2.54, "line");
  current_point=addpoint((x[46]+siirtox)/2.54, (y[46])/2.54, "line");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint((x[45]+siirtox)/2.54, (y[45])/2.54, "xarc_start");
  notch_type(current_point,"NOTCH",0);
  addpoint((x[28]+siirtox)/2.54, (y[28])/2.54, "xarc_corner");
  addpoint((x[127]+siirtox)/2.54, (y[127])/2.54, "line");
  addpoint((x[22]+siirtox)/2.54, (y[22])/2.54, "xarc_start");
  addpoint((x[122]+siirtox)/2.54, (y[122])/2.54, "xarc_corner");
  addpoint((x[21]+siirtox)/2.54, (y[21])/2.54, "xarc_start");
  addpoint((x[12]+siirtox)/2.54, (y[12]+dist(12,21)/2)/2.54, "xarc_corner");
  current_point=addpoint((x[13]-1.5+siirtox)/2.54, (y[13])/2.54, "line");
  notch_type(current_point,"NOTCH",0);
  addpoint((x[14]-1+siirtox)/2.54, (y[14])/2.54, "line");
  group_obj[17]=current_object;

  if (language == 0)
    {
    current_object=newobject("text"," Back Center Piece, CB, Cut 2",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[12]-2+siirtox)/2.54, (y[10]-5)/2.54, "line");
  group_obj[18]=current_object;

  current_object=newobject("poly");
  addpoint((x[46]+2+siirtox)/2.54, (y[10]-5)/2.54, "line");
  addpoint((x[46]+2+siirtox)/2.54, (y[51])/2.54, "open");
  group_obj[19]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Grainline",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[46]+2.2+siirtox)/2.54, (y[4])/2.54, "line");
  group_obj[20]=current_object;

  if(sv>0)
    {

    offset_mark(17);
    select(current_selection,group_obj[18]);
    select(current_selection,group_obj[19]);
    select(current_selection,group_obj[20]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(17);
    current_selection=newselection("object");
    select(current_selection,group_obj[17]);
    select(current_selection,group_obj[18]);
    select(current_selection,group_obj[19]);
    select(current_selection,group_obj[20]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtoy=sp/2;

  cont(127,22,517,-5);
  current_object=newobject("poly");
  addpoint((x[21]+siirtox)/2.54, (y[21]+siirtoy)/2.54, "xarc_start");
  addpoint((x[122]+siirtox)/2.54, (y[122]+siirtoy)/2.54, "xarc_corner");
  addpoint((x[22]+siirtox)/2.54, (y[22]+siirtoy)/2.54, "LINE");
  addpoint((x[517]+siirtox)/2.54, (y[517]+siirtoy)/2.54, "xarc_start");
  addpoint((x[122]+siirtox)/2.54, ((y[121]-5)+siirtoy)/2.54, "xarc_corner");
  addpoint((x[21]+siirtox)/2.54, ((y[21]-4)+siirtoy)/2.54, "LINE");
  group_obj[21]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Back facing, CB, Cut 1 on fold",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[22]+siirtox)/2.54, (y[21]-2+siirtoy)/2.54, "line");
  group_obj[44]=current_object;
  siirtoy=0;

  if(sv>0)
    {

    offset_mark(21);
    select(current_selection,group_obj[44]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(21);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[21]);
    select(current_selection,group_obj[44]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=0;
  }

Draw_straight_back()
  {
  siirtox=2;

  current_object=newobject("poly");
  addpoint((x[14]-1+siirtox)/2.54, (y[14])/2.54, "line");
  addpoint((x[13]-1.5+siirtox)/2.54, (y[13])/2.54, "xarc_start");
  addpoint((x[12]+siirtox)/2.54, (y[21]-dist(21,12)/2)/2.54, "xarc_corner");
  addpoint((x[21]+siirtox)/2.54, (y[21])/2.54, "xarc_start");
  addpoint((x[122]+siirtox)/2.54, (y[122])/2.54, "xarc_corner");
  addpoint((x[22]+siirtox)/2.54, (y[22])/2.54, "line");
  addpoint((x[127]+siirtox)/2.54, (y[127])/2.54, "line");
  addpoint((x[127]+siirtox)/2.54, (y[28])/2.54, "line");
  addpoint((x[129]+siirtox)/2.54, (y[129])/2.54, "line");
  addpoint((x[26]+siirtox)/2.54, (y[26])/2.54, "xarc_start");
  addpoint((x[37]+siirtox)/2.54, (y[37])/2.54, "xarc_corner");
  addpoint((x[35]+siirtox)/2.54, (y[35])/2.54, "xarc_start");
  addpoint((x[9]+siirtox)/2.54, (y[9])/2.54, "xarc_corner");
  addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "line");
  addpoint((x[149]+siirtox)/2.54, (y[149])/2.54, "xarc_start");
  addpoint((x[49]+siirtox)/2.54, (y[49])/2.54, "xarc_corner");
  addpoint((x[148]+siirtox)/2.54, (y[148])/2.54, "line");
  addpoint((x[48]+siirtox)/2.54, (y[48])/2.54, "line");
  addpoint((x[519]+siirtox)/2.54, (y[519])/2.54, "line");
  addpoint((x[44]+siirtox)/2.54, (y[44])/2.54, "line");
  addpoint((x[45]+siirtox)/2.54, (y[45])/2.54, "line");
  addpoint((x[46]+siirtox)/2.54, (y[46])/2.54, "line");
  addpoint((x[520]+siirtox)/2.54, (y[520])/2.54, "line");
  group_obj[22]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Back Piece, CB, Cut 2",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[12]-2+siirtox)/2.54, (y[10]-5)/2.54, "line");
  group_obj[23]=current_object;

  current_object=newobject("poly");
  addpoint((x[46]+2+siirtox)/2.54, (y[10]-5)/2.54, "line");
  addpoint((x[46]+2+siirtox)/2.54, (y[51])/2.54, "open");
  group_obj[24]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Grainline",-1.570796,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[46]+2.2+siirtox)/2.54, (y[4])/2.54, "line");
  group_obj[25]=current_object;

  if(sv>0)
    {

    offset_mark(22);
    select(current_selection,group_obj[23]);
    select(current_selection,group_obj[24]);
    select(current_selection,group_obj[25]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(22);
    current_selection=newselection("object");
    select(current_selection,group_obj[22]);
    select(current_selection,group_obj[23]);
    select(current_selection,group_obj[24]);
    select(current_selection,group_obj[25]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtoy=sp/2;
  cont(127,22,517,-5);
  current_object=newobject("poly");
  addpoint((x[21]+siirtox)/2.54, (y[21]+siirtoy)/2.54, "xarc_start");
  addpoint((x[122]+siirtox)/2.54, (y[122]+siirtoy)/2.54, "xarc_corner");
  addpoint((x[22]+siirtox)/2.54, (y[22]+siirtoy)/2.54, "LINE");
  addpoint((x[517]+siirtox)/2.54, (y[517]+siirtoy)/2.54, "xarc_start");
  addpoint((x[122]+siirtox)/2.54, ((y[121]-5)+siirtoy)/2.54, "xarc_corner");
  addpoint((x[21]+siirtox)/2.54, ((y[21]-4)+siirtoy)/2.54, "LINE");
  group_obj[26]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Back facing, Cut 1 on fold, CB",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[22]+siirtox)/2.54, (y[21]-2+siirtoy)/2.54, "line");
  group_obj[45]=current_object;
  siirtoy=0;

  if(sv>0)
    {

    offset_mark(26);
    select(current_selection,group_obj[45]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(26);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[26]);
    select(current_selection,group_obj[45]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=dist(40,13)+4;
  current_object=newobject("poly");
  addpoint((x[526]+siirtox)/2.54, (y[526])/2.54, "XARC_START");
  addpoint((x[527]+siirtox)/2.54, (y[527])/2.54, "XARC_CORNER");
  addpoint((x[528]+siirtox)/2.54, (y[528])/2.54, "XARC_START");
  addpoint((x[530]+siirtox)/2.54, (y[530])/2.54, "XARC_CORNER");
  addpoint((x[529]+siirtox)/2.54, (y[529])/2.54, "line");
  addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "XARC_START");
  addpoint((x[9]+siirtox)/2.54, (y[9])/2.54, "XARC_CORNER");
  addpoint((x[35]+siirtox)/2.54, (y[35])/2.54, "XARC_START");
  addpoint((x[37]+siirtox)/2.54, (y[37])/2.54, "XARC_CORNER");
  addpoint((x[26]+siirtox)/2.54, (y[26])/2.54, "line");
  group_obj[27]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Armscye facing, back",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[11]+1+siirtox)/2.54, (y[11]-1)/2.54, "line");
  group_obj[43]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Cut 2",0.0,0.2,0.2,"SIMP.CHR");

    }



  addpoint((x[11]+1+siirtox)/2.54, (y[11]-2)/2.54, "line");
  group_obj[47]=current_object;
  siirtox=0;

  if(sv>0)
    {

    offset_mark(27);
    select(current_selection,group_obj[43]);
    select(current_selection,group_obj[47]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(27);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[27]);
    select(current_selection,group_obj[43]);
    select(current_selection,group_obj[47]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=0;
  }

newobj_dot(double x, double y)
  {
  object temp;
  line("CENTER_LINE");
  temp = newobject("poly");
  addpoint(x, y, "line");
  line("SOLID_LINE");
  return temp;
  }

coord(double orig, double dest, double xxx, double yyy)
  {
  x[dest]=x[orig]+xxx;
  y[dest]=y[orig]+yyy;
  }

center(double one, double two, double result)
  {
  x[result]=(x[one]+x[two])/2;
  y[result]=(y[one]+y[two])/2;
  }

dist(double p1, double p2)
  {
  return distance(x[p1],y[p1],x[p2],y[p2]);
  }

line_intersect(double start1, double end1, double start2, double end2, double dest)
  {
  double tempx;
  double tempy;

  intersect(x[start1],y[start1],x[end1],y[end1],x[start2],y[start2],x[end2],y[end2],0);
  x[dest]=getresultx();
  y[dest]=getresulty();
  }

cont(double cstart, double cend, double cdest, double cvdistanceance)
  {
  double ang;

  ang=angle(x[cstart], y[cstart], x[cend], y[cend]);
  polar(x[cend], y[cend], ang, cvdistanceance);
  x[cdest]=getresultx();
  y[cdest]=getresulty();
  }

shift(double orig, double xxx, double yyy)
  {
  x[orig]=x[orig]+xxx;
  y[orig]=y[orig]+yyy;
  }

rotate(double rpoint,double rcenter, double rangle)
  {
  double vdistance, vang;

  vdistance=dist(rpoint, rcenter);
  vang=angle(x[rcenter],y[rcenter],x[rpoint],y[rpoint]);
  polar(x[rcenter],y[rcenter],vang+rangle,vdistance);
  x[rpoint]=getresultx();
  y[rpoint]=getresulty();
  }

linecirc(double PA,double  PB,double  PC,double  dradius,double  which, double PD)
  {
  double  mslope, dist0, dist1, dist2, xtemp;
  double tx, ty;
  xtemp = (x[PB]-x[PC])*(x[PB]-x[PC]);

  if (xtemp > 0)
    {
    xtemp = (y[PB]-y[PC])*(y[PB]-y[PC]);

    if ( xtemp > 0)
      {
      mslope = (y[PC] - y[PB])/(x[PC] - x[PB]);
      tx = x[PA] + 1;
      ty = y[PA] - 1/mslope;
      intersect(x[PA], y[PA], tx, ty, x[PB], y[PB], x[PC], y[PC], 0);
      tx = getresultx();
      ty = getresulty();
      dist1 = distance(x[PA], y[PA], tx, ty);
      dist2 = interceptline(0, dist1, dradius);
      dist0 = sqrt(1+mslope*mslope);
      xtemp = dist2/dist0;

      if (which)
        {
        x[PD] = tx+xtemp;
        y[PD] = ty+ xtemp*mslope;
        }

      else
        {
        x[PD] =  tx-xtemp;
        y[PD] = ty- xtemp*mslope;
        }
      }

    else
      {
      x[PD] = x[PB];

      if (which)
        {
        y[PD] = y[PA] + interceptline(x[PA], x[PB], dradius);
        }

      else
        {
        y[PD] = y[PA] - interceptline(x[PA], x[PB], dradius);
        }
      }
    }

  else
    {
    y[PD] = y[PB];

    if (which)
      {
      x[PD] = x[PA] + interceptline(y[PA], y[PB], dradius);
      }

    else
      {
      x[PD] = x[PA] - interceptline(y[PA], y[PB], dradius);
      }
    }
  }

double xar[13], yar[13];
double save_rx, save_ry;

arclength(double start, double corner, double end)
  {

  double ct, last_x, last_y;
  double a_dist;

  last_x = x[start];
  last_y = y[start];

  a_dist=0;

  for (ct=1; ct < 12; ct = ct + 1)
    {
    fts(start, corner, end, ct);
    a_dist = a_dist + distance(save_rx, save_ry, last_x, last_y);
    last_x=save_rx;
    last_y=save_ry;
    }

  return a_dist;
  }

double A1, A2, B1, B2;
double sx, sy, cx, cy, ex, ey;

double t0[2], t1[2];
double ftc[2];
fts(double start, double corner, double end, double pos)
  {
  if (pos<1)
    {
    save_rx=x[start];
    save_ry=y[start];
    }

  else
    {
    if (pos<2)
      {
      sx = x[start];
      sy = y[start];
      cx = x[corner];
      cy = y[corner];
      ex = x[end];
      ey = y[end];

      A1=cx - sx;
      A2=cy - sy;
      B1=cx - ex;
      B2=cy - ey;

      A1=-A1;
      B1=-B1;
      A2=-A2;
      B2=-B2;

      t0[0]=A1;
      t0[1]=B1;
      t1[0]=A2;
      t1[1]=B2;

      ftc[0]= cx + (t0[0] + t0[1]);
      ftc[1]= cy + (t1[0] + t1[1]);

      save_rx = t0[0]*(xar[pos])+t0[1]*(yar[pos])+ ftc[0];
      save_ry = t1[0]*(xar[pos])+t1[1]*(yar[pos])+ ftc[1];
      }

    else
      {
      if (pos>10)
        {
        save_rx=x[end];
        save_ry=y[end];
        }

      else
        {
        save_rx = t0[0]*(xar[pos])+t0[1]*(yar[pos])+ ftc[0];
        save_ry = t1[0]*(xar[pos])+t1[1]*(yar[pos])+ ftc[1];
        }
      }
    }
  }

init_xarc_array()
  {

  double ang_start, ang_end, step, theta, ct;
  double XARC_PIECES;
  XARC_PIECES = 12;

  ang_start = -3.14159/2;
  ang_end= -3.14159;

  ct=0;

  step= (ang_end - ang_start)/(XARC_PIECES-1);

  for (theta=ang_start; ct < XARC_PIECES; theta = theta + step)
    {
    xar[ct] = cos(theta);
    yar[ct] = sin(theta);
    ct=ct+1;
    }

  }

max(double aa, double bb)
  {
  if (aa > bb)
    {
    return aa;
    }

  else
    {
    return bb;
    }
  }

min(double aa, double bb)
  {
  if (aa < bb)
    {
    return aa;
    }

  else
    {
    return bb;
    }
  }

dialog_model()
  {
  if (language == 0)
    {
    start_pict_dialog("VEST MODEL");
    add_pict_item("Princess to shoulder","vest_princess.jpg");
    add_pict_item("Bust dart to side seam","vest_darts.jpg");
    run_pict("Next");
    model=get_pict_result();
    Forward();
    }
  }


dialog_ease()
  {
  if (language == 0)
    {
    start_pict_dialog("BUST EASE");
    add_pict_item("Normal (+4.75in/+12cm)"," ");
    add_pict_item("Minimum (+4in/+10cm)"," ");
    add_pict_item("Maximum (+5.5in/+14cm)"," ");

    if (run_pict("Back","Next"))
      {
      ease=get_pict_result();
      Forward();
      }

    else
      {
      ease=0;
      Backward();
      }
    }
  }


dialog_collar()
  {
  if (language == 0)
    {
    start_pict_dialog("NECKLINE STYLE");
    add_pict_item("Jewel neckline","vest_jewel-neck.jpg");
    add_pict_item("V-shape neckline","vest_v-neck.jpg");

    if (run_pict("Back","Next"))
      {
      collar=get_pict_result();
      Forward();
      }

    else
      {
      collar=0;
      Backward();
      }
    }
  }


dialog_collar_depth()
  {
  if (language == 0)
    {
    start_pict_dialog("NECK DEPTH");
    add_pict_item("Normal","vest_depth_normal.jpg");
    add_pict_item("Shallow","vest_depth_shallow.jpg");
    add_pict_item("Deep","vest_depth_deep.jpg");

    if (run_pict("Back","Next"))
      {
      neck_depth=get_pict_result();
      Forward();
      }

    else
      {
      neck_depth=0;
      Backward();
      }
    }
  }


dialog_collar_width()
  {
  if (language == 0)
    {
    start_pict_dialog("NECK WIDTH");
    add_pict_item("Normal","vest_width_normal.jpg");
    add_pict_item("Wide","vest_width_wide.jpg");
    add_pict_item("Extra Wide","vest_width_xwide.jpg");

    if (run_pict("Back","Next"))
      {
      neck_width=get_pict_result();
      Forward();
      }

    else
      {
      neck_width=0;
      Backward();
      }
    }
  }


Forward()
  {
  index = index + 1;

  if ((index == 3) && (collar != 0))    {   index=index + 1; done = 1;   }

  if ((index == 4) && (collar != 0))    {   index=index + 1; done = 1;   }

  if (index == 5)    {   done = 1;  }
  }

Backward()
  {
  index = index - 1;
  }

mark(double pass_index)
  {
  group_obj[pass_index]=marker_piece(group_obj[pass_index],1);
  marker_array[marker_count] = group_obj[pass_index];
  marker_count = marker_count + 1;
  }

offset_mark(double pass_index)
  {
  point pnt, test;
  double save_x, save_y;

  current_selection=newselection("OBJECT");
  select(current_selection,group_obj[pass_index]);
  sel_push(current_selection);
  var_push(sv);
  run_command("OFFSET");
  deselect(current_selection);
  current_object=last_obj();

  marker_array[marker_count] = marker_piece(current_object,1);
  current_selection=newselection("OBJECT");
  select(current_selection, marker_array[marker_count]);
  select(current_selection, group_obj[pass_index]);
  marker_count = marker_count + 1;
  }