// Copyright (C) 2001 Leena L�hteenm�ki, Finland
// Copyright (C) 2014 PatternMaker Software
// 2014/02/06 

double index, done;
object marker_array[20];
double marker_count, loop;
double result;
double x[600], y[600];
double ang,ang2,vang,vdistance,rangle;
object group_obj[200];
object current_object;
point current_point;
selection current_selection;

double model,ky,ry,vy,yly,aly,rkkv,rk,vk,sp,sl,op;
double ylk,alk,kay,ray,hp;
double eml, tml, sml, smlyly,smlaly;
double ktk,ktl,ptl,ptp,pts,rl,pk;
double okt,oke;
double ktpe,ktpt,ktp;
double pit;
double ease, f_ry[3],f_ky[3],f_vy[3],f_yly[3],f_aly[3],f_rkkv[3],f_sl[3];
double f_op[3],f_vk[3],f_rk[3],f_rl[3],f_sp[3],f_ktk[3];
double f_kay[3],f_ray[3],f_hp[3];
double kpe,kpt,kp;
double collar;
double napit,int;
double sleeve, sleeve_length;
double shoulder_padding;
double nv;
double sv;
double metric;
double siirtox, siirtoy;
double language;
double mansetti;
double siirtox, siirtoy;

main()
  {
  language=get_language();
  if ( language != 0 ) { language = 0; }

  if (language == 0)
    {
    check_reg(0, "Leena","Maternity", "This macro needs to be properly installed before running it.");
    }

  ky=39.25;
  ry=96;
  vy=78;
  yly=95;
  aly=102;
  rkkv=21;
  rk=36.8;
  vk=55.4;
  sp=41.3;
  sl=37.6;
  op=13.5;
  ylk=9;
  alk=19;
  kay=30;
  ray=18.5;
  hp=60.4;
  sv=1;

  pit=35;
  nv=2;

// index = 0;

//Start Options
  while (!done)
    {
    if (index==0) { Popup1(); }
    if (index==1) { Popup2(); }
    if (index==2) { Popup3(); }
    if (index==3) { Popup4(); }
    if (index==4) { Popup5(); }
    }

//End Options

  if (is_function("unit_mode")==1)
    {
    metric = unit_mode();

    if (!metric)
      {
      ky=ky/2.54;
      ry=ry/2.54;
      vy=vy/2.54;
      yly=yly/2.54;
      aly=aly/2.54;
      rkkv=rkkv/2.54;
      vk=vk/2.54;
      sp=sp/2.54;
      sl=sl/2.54;
      op=op/2.54;
      ylk=ylk/2.54;
      alk=alk/2.54;
      rk=rk/2.54;
      kay=kay/2.54;
      ray=ray/2.54;
      hp=hp/2.54;
      pit=pit/2.54;
      sv=sv/2.54;
      }
    }

  else
    {
    if (language == 0)
      {
      metric=2*pop_up("Units","Inches","Centimeters");
      }

    if (metric<1)
      {
      ky=ky/2.54;
      ry=ry/2.54;
      vy=vy/2.54;
      yly=yly/2.54;
      aly=aly/2.54;
      rkkv=rkkv/2.54;
      vk=vk/2.54;
      sp=sp/2.54;
      sl=sl/2.54;
      op=op/2.54;
      ylk=ylk/2.54;
      alk=alk/2.54;
      rk=rk/2.54;
      kay=kay/2.54;
      ray=ray/2.54;
      hp=hp/2.54;
      pit=pit/2.54;
      sv=sv/2.54;
      }
    }

  if(metric==0)
    {
    sv=0.39;
    }

  double read;
  read = 0;

  if (is_function("measure_table")==1)
    {
    if (measure_table("default_women")==1)
      {
      read = 1;
      }
    }

  if (read==0)
    {
    if (is_function("start_picture_input"))
      {
      if (language == 0)
        {
        start_picture_input("NURSING SHIRT");

        }

      if (language == 0)
        {
        add_picture_input("Neck Circ.",ky,"w_meas_neckcirc");

        }

      if (language == 0)
        {
        add_picture_input("Bust Circ.", ry,"w_meas_bustcirc");

        }

      if (language == 0)
        {
        add_picture_input("Waist Circ.", vy, "w_meas_waistcirc");

        }

      if (language == 0)
        {
        add_picture_input("Abdomen Circ.",yly, "w_meas_abdmcirc");

        }

      if (language == 0)
        {
        add_picture_input("Hip Circ.",aly, "w_meas_hipcirc");

        }

      if (language == 0)
        {
        add_picture_input("Bust Span", rkkv, "w_meas_bustspan");

        }

      if (language == 0)
        {
        add_picture_input("Bust Height",rk, "w_meas_bustht");

        }

      if (language == 0)
        {
        add_picture_input("Waist Height",vk, "w_meas_waistht");

        }

      if (language == 0)
        {
        add_picture_input("Back Length",sp, "w_meas_bklength");

        }

      if (language == 0)
        {
        add_picture_input("Back Width",sl,  "w_meas_bkwidth");

        }

      if (language == 0)
        {
        add_picture_input("Shoulder",op, "w_meas_shldr");

        }

      if (language == 0)
        {
        add_picture_input("Waist - Abdomen",ylk, "w_meas_waist-abdm");

        }

      if (language == 0)
        {
        add_picture_input("Waist - Hip",alk,  "w_meas_waist-hip");

        }

      if (language == 0)
        {
        add_picture_input("Biceps",kay, "w_meas_biceps");

        }

      if (language == 0)
        {
        add_picture_input("Wrist Circ.",ray, "w_meas_wrist");

        }

      if (language == 0)
        {
        add_picture_input("Overarm",hp, "w_meas_overarm");

        }

      run_picture_input();
      }

    else
      {
      if (language == 0)
        {
        dialog_box( "NURSING SHIRT - 1 of 2",
                    "Neck Circ.",ky,
                    "Bust Circ.", ry,
                    "Waist Circ.", vy,
                    "Abdomen Circ.",yly,
                    "Hip Circ.",aly,
                    "Bust Span", rkkv,
                    "Bust Height",rk,
                    "Waist Height",vk,
                    "Back Length",sp,
                    "Back Width",sl);

        }

      if (language == 0)
        {
        dialog_box("NURSING SHIRT - 2 of 2",
                   "Shoulder Length",op,
                   "Waist - Abdomen",ylk,
                   "Waist - Hip",alk,
                   "Biceps",kay,
                   "Wrist Circ.",ray,
                   "Overarm",hp);

        }

      }
    }

  if (is_function("start_picture_input"))
    {
    if (language == 0)
      {
      start_picture_input("JUNIORS' FITTING SHELL");

      }

    if (language == 0)
      {
      add_picture_input("Length from Waist",pit,"");

      }

    if (language == 0)
      {
      add_picture_input("Seam allowance", sv, "meas_seamallow");

      }

    run_picture_input();
    }

  else
    {
    if (language == 0)
      {
      dialog_box( "CUSTOM MEASUREMENTS",
                  "Length from Waist",pit,
                  "Seam Allowance",sv);

      }

    }

  if (is_function("unit_mode")==1)
    {
    metric = unit_mode();

    if (!metric)
      {
      ky=ky*2.54;
      ry=ry*2.54;
      vy=vy*2.54;
      yly=yly*2.54;
      aly=aly*2.54;
      rkkv=rkkv*2.54;
      vk=vk*2.54;
      sp=sp*2.54;
      sl=sl*2.54;
      op=op*2.54;
      ylk=ylk*2.54;
      alk=alk*2.54;
      rk=rk*2.54;
      kay=kay*2.54;
      ray=ray*2.54;
      hp=hp*2.54;
      pit=pit*2.54;
      }
    }

  else
    {
    if (metric<1)
      {
      ky=ky*2.54;
      ry=ry*2.54;
      vy=vy*2.54;
      yly=yly*2.54;
      aly=aly*2.54;
      rkkv=rkkv*2.54;
      vk=vk*2.54;
      sp=sp*2.54;
      sl=sl*2.54;
      op=op*2.54;
      ylk=ylk*2.54;
      alk=alk*2.54;
      rk=rk*2.54;
      kay=kay*2.54;
      ray=ray*2.54;
      hp=hp*2.54;
      pit=pit*2.54;
      }
    }

  if(metric==2)
    {
    sv=sv/2.54;
    }

  mansetti=ray+4;

  if (ry < 76)
    {
    oke=4.6;
    }

  else
    {
    if (ry < 80)
      {
      oke=4.4;
      }

    else
      {
      if (ry < 84)
        {
        oke=4.2;
        }

      else
        {
        if (ry < 88)
          {
          oke=4.0;
          }

        else
          {
          if (ry < 92)
            {
            oke=3.8;
            }

          else
            {
            if (ry < 96)
              {
              oke=3.6;
              }

            else
              {
              if (ry < 100)
                {
                oke=3.4;
                }

              else
                {
                if (ry < 104)
                  {
                  oke=3.2;
                  }

                else
                  {
                  if (ry < 110)
                    {
                    oke=3.0;
                    }

                  else
                    {
                    if (ry < 116)
                      {
                      oke=2.8;
                      }

                    else
                      {
                      if (ry < 122)
                        {
                        oke=2.6;
                        }

                      else
                        {
                        oke=2.4;
                        }
                      }
                    }
                  }
                }
              }
            }
          }
        }
      }
    }

  if(ry < 76)
    {
    okt=2.35;
    }

  else
    {
    if (ry < 80)
      {
      okt=2.4;
      }

    else
      {
      if (ry < 84)
        {
        okt=2.45;
        }

      else
        {
        if (ry < 88)
          {
          okt=2.5;
          }

        else
          {
          if (ry < 92)
            {
            okt=2.55;
            }

          else
            {
            if (ry < 96)
              {
              okt=2.6;
              }

            else
              {
              if (ry < 100)
                {
                okt=2.65;
                }

              else
                {
                if (ry < 104)
                  {
                  okt=2.7;
                  }

                else
                  {
                  if (ry < 110)
                    {
                    okt=2.75;
                    }

                  else
                    {
                    if (ry < 116)
                      {
                      okt=2.8;
                      }

                    else
                      {
                      if (ry < 122)
                        {
                        okt=2.85;
                        }

                      else
                        {
                        okt=2.9;
                        }
                      }
                    }
                  }
                }
              }
            }
          }
        }
      }
    }

  if (ry < 76)
    {
    rl=4.3;
    }

  else
    {
    if (ry < 80)
      {
      rl=5.1;
      }

    else
      {
      if (ry < 84)
        {
        rl=5.8;
        }

      else
        {
        if (ry < 88)
          {
          rl=6.6;
          }

        else
          {
          if (ry < 92)
            {
            rl=7.3;
            }

          else
            {
            if (ry < 96)
              {
              rl=8.1;
              }

            else
              {
              if (ry < 100)
                {
                rl=8.8;
                }

              else
                {
                if (ry < 104)
                  {
                  rl=9.6;
                  }

                else
                  {
                  if (ry < 110)
                    {
                    rl=10.8;
                    }

                  else
                    {
                    if (ry < 116)
                      {
                      rl=12.1;
                      }

                    else
                      {
                      if (ry < 122)
                        {
                        rl=13.3;
                        }

                      else
                        {
                        rl=14.6;
                        }
                      }
                    }
                  }
                }
              }
            }
          }
        }
      }
    }

  if (ry < 76)
    {
    ktk=20.4;
    }

  else
    {
    if (ry < 80)
      {
      ktk=20.8;
      }

    else
      {
      if (ry < 84)
        {
        ktk=21.2;
        }

      else
        {
        if (ry < 88)
          {
          ktk=21.6;
          }

        else
          {
          if (ry < 92)
            {
            ktk=22;
            }

          else
            {
            if (ry < 96)
              {
              ktk=22.4;
              }

            else
              {
              if (ry < 100)
                {
                ktk=22.8;
                }

              else
                {
                if (ry < 104)
                  {
                  ktk=23.2;
                  }

                else
                  {
                  if (ry < 110)
                    {
                    ktk=23.8;
                    }

                  else
                    {
                    if (ry < 116)
                      {
                      ktk=24.4;
                      }

                    else
                      {
                      if (ry < 122)
                        {
                        ktk=25;
                        }

                      else
                        {
                        ktk=25.6;
                        }
                      }
                    }
                  }
                }
              }
            }
          }
        }
      }
    }

  f_ry[1]=ry+14;
  f_ky[1]=ky+1.5;
  f_vy[1]=vy+12;
  f_yly[1]=yly+2+10;
  f_aly[1]=aly+2+10;
  f_rkkv[1]=rkkv+1.4;
  f_sl[1]=sl+3.4;
  f_op[1]=op;
  f_vk[1]=vk;
  f_rk[1]=rk;
  f_rl[1]=rl+0.3;
  f_sp[1]=sp;
  f_ktk[1]=ktk+3;
  f_kay[1]=kay+10;
  f_ray[1]=ray+10;
  f_hp[1]=hp+0.75;

  f_ry[0]=ry+16;
  f_ky[0]=ky+3;
  f_vy[0]=vy+14;
  f_yly[0]=yly+2+12;
  f_aly[0]=aly+2+12;
  f_rkkv[0]=rkkv+1.6;
  f_sl[0]=sl+4;
  f_op[0]=op+0.2;
  f_vk[0]=vk+0.5;
  f_rk[0]=rk+0.5;
  f_rl[0]=rl+0.4;
  f_sp[0]=sp+0.5;
  f_ktk[0]=ktk+3.5;
  f_kay[0]=kay+11;
  f_ray[0]=ray+11;
  f_hp[0]=hp+1;

  f_ry[2]=ry+18;
  f_ky[2]=ky+3.75;
  f_vy[2]=vy+16;
  f_yly[2]=yly+2+14;
  f_aly[2]=aly+2+14;
  f_rkkv[2]=rkkv+1.8;
  f_sl[2]=sl+4.6;
  f_op[2]=op+0.4;
  f_vk[2]=vk+0.5;
  f_rk[2]=rk+0.5;
  f_rl[2]=rl+0.5;
  f_sp[2]=sp+0.5;
  f_ktk[2]=ktk+4;
  f_kay[2]=kay+12;
  f_ray[2]=ray+12;
  f_hp[2]=hp+1.25;

  ry=f_ry[ease];
  ky=f_ky[ease];
  vy=f_vy[ease];
  yly=f_yly[ease];
  aly=f_aly[ease];
  rkkv=f_rkkv[ease];
  sl=f_sl[ease];
  op=f_op[ease];
  vk=f_vk[ease];
  rk=f_rk[ease];
  rl=f_rl[ease];
  sp=f_sp[ease];
  ktk=f_ktk[ease];
  kay=f_kay[ease];
  ray=f_ray[ease];

  pts=ky/5+0.5;
  ptl=ky/5-1;
  ktl=ry/8-1.5;
  eml=3;
  tml=3;
  sml=(ry/2-vy/2)-6;
  smlyly=(ry/2-yly/2)-3;
  smlaly=(ry/2-aly/2);

  if(aly<yly)
    { aly=yly+5; }

  pts=pts+1;
  ptl=ptl+1;

  if(sleeve==2)
    {
    op=op+3;
    }

  if(shoulder_padding==0)
    {
    oke=oke-0.5;
    okt=okt-1;
    op=op+1;
    }

  x[0]=0;
  y[0]=0;

  coord(0,1,0,0);
  coord(1,2,-ry/2,0);
  coord(2,3,0,-ktk);
  coord(2,4,0,-sp);
  coord(4,5,0,-ylk);
  coord(4,6,0,-alk);
  coord(1,7,-sl/2,0);
  coord(7,8,-ktl,0);
  coord(7,9,0,-ktk);
  coord(9,10,-ktl,0);
  coord(9,11,-ktl/2,0);
  coord(9,53,0,0);
  coord(11,54,0,0);
  coord(9,12,sl/2,0);
  coord(1,13,0,-sp);
  coord(13,14,0,-ylk);
  coord(13,15,0,-alk);
  coord(13,16,-sl/2-ktl/2,0);
  coord(14,17,-sl/2-ktl/2,0);
  coord(15,18,-sl/2-ktl/2,0);
  coord(3,19,rkkv/2,0);
  coord(4,20,rkkv/2,0);
  coord(1,21,0,.5);
  coord(1,22,-ptl,2.5);
  coord(22,122,0,-2.5);
  coord(2,23,ptl,0);
  coord(1,24,0,-okt);
  coord(24,124,-100,0);
  coord(1,25,0,-oke);
  coord(25,125,-100,0);
  coord(22,26,-sqrt((op+2)*(op+2)-(okt+2.5)*(okt+2.5)),-(okt+2.5));
  coord(23,123,0,100);
  cont(26,22,27,-5);
  coord(1,28,-rkkv/2,-7);
  cont(28,27,127,.6);
  cont(26,22,29,-6);

  double ang;
  ang=angle(x[28],y[28],x[27],y[27])-angle(x[28],y[28],x[29],y[29]);
  rotate(129,28,-ang);

  coord(20,30,0,vk-rk);

  init_xarc_array();
  ptp=arclength(21,122,22);

  coord(30,31,-rkkv/2+ptl,sqrt((rk-ptp)*(rk-ptp)-(rkkv/2-ptl)*(rkkv/2-ptl)));

  coord(31,102,-ptl,-pts);
  y[23]=y[102];

  coord(31,32,0,0);
  double ang;
  ang=angle(x[30],y[30],x[31],y[31])-angle(x[30],y[30],x[31]+rl,y[31]);
  rotate(32,30,-ang);

  x[223]=x[32];
  y[223]=y[25];
  oke=dist(32,223);

  coord(32,33,sqrt(op*op-oke*oke),-oke);
  cont(33,31,131,-5);
  cont(33,32,132,-5);
  cont(132,30,132,-dist(30,132));
  coord(10,34,0,ktk/4);
  coord(10,36,0,ktk/2);
  coord(9,35,0,ktk/3);

  coord(9,37,0,2*ktk/3);
  y[9]=y[9]+2;

  coord(6,38,rkkv/2,0);
  coord(38,39,0,(alk-ylk)/2);
  coord(20,40,-eml/2,0);
  coord(20,41,eml/2,0);
  coord(15,42,-rkkv/2,0);
  coord(42,43,0,(alk-ylk)/2);
  coord(13,44,-rkkv/2-tml/2,0);
  coord(12,45,-rkkv/2,-2);
  coord(44,46,tml,0);
  coord(18,47,smlaly/2,0);
  coord(17,48,smlyly/2,0);
  coord(16,49,sml/2,0);
  coord(16,50,-sml/2,0);
  coord(17,51,-smlyly/2,0);
  coord(18,52,-smlaly/2,0);

  cont(51,50,151,-3);
  cont(11,50,111,-3);

  cont(11,49,149,-3);
  cont(48,49,148,-3);

  cont(50,11,310,-4);

  coord(310,311,0,0);

  if(shoulder_padding==0)
    {
    x[36]=x[36]+1;
    x[37]=x[37]-1;
    }

  coord(4,190,0,-pit);
  coord(13,191,0,-pit);

  line_intersect(39,40,190,191,192);
  line_intersect(39,41,190,191,193);
  line_intersect(51,50,190,191,194);
  line_intersect(48,49,190,191,195);
  line_intersect(43,44,190,191,196);
  line_intersect(43,46,190,191,197);
  line_intersect(38,20,190,191,198);
  line_intersect(47,48,190,191,199);
  line_intersect(52,51,190,191,200);
  line_intersect(42,45,190,191,201);

  coord(131,211,-50,0);
  line_intersect(131,211,31,23,212);

  cont(22,26,26,-2);

  x[80]=x[3]+nv;
  y[80]=y[30]-15;

  x[81]=x[30];
  y[81]=y[30]-15;

  coord(81,82,0,0);

  cont(52,11,83,-15);

  x[84]=x[3]+nv;
  y[84]=y[23];

  x[85]=x[3];
  y[85]=y[23];

  x[86]=x[3]-3*nv;
  y[86]=y[23];

  coord(6,87,-3*nv,0);
  coord(6,88,0,0);
  coord(6,89,nv,0);

  coord(131,211,-50,0);
  line_intersect(131,211,31,23,212);

  init_xarc_array();
  kpe=arclength(31,23,102)+.5;
  kpt=arclength(21,122,22);
  kp=kpe+kpt;

  coord(0,200,0,5+5);
  coord(200,201,-kp/4,0);
  coord(201,202,-kp/4,0);
  coord(202,203,-kp/4,-2.5);
  coord(200,204,-kp,-5);
  coord(200,205,0,6.5);
  coord(201,206,0,6.5);
  coord(202,207,0,6.5);
  coord(203,208,0,7.5);
  coord(204,209,0,8.5);
  cont(208,209,210,+4);

  double seam_conv;
  seam_conv=arclength(200,201,202)+arclength(202,203,204);
  double ero_conv;
  ero_conv=kp-seam_conv;
  x[200]=x[200]+ero_conv;
  x[205]=x[205]+ero_conv;

  coord(200,260,0,5);
  coord(260,261,-kp,0);
  coord(261,262,-nv,0);
  coord(261,263,4,0);
  coord(260,264,0,0.7);
  coord(264,265,-kp/3,0);
  coord(262,266,0,.5);
  coord(266,267,.5,2.5);
  coord(264,268,0,3.5);
  coord(265,269,0,3.5);
  coord(267,270,nv+0.2,0);
  coord(268,271,0,1);
  coord(269,272,0,1);
  coord(271,273,0,4);
  coord(269,274,-kp/2,4);
  coord(270,275,-2,6);
  coord(273,276,-kp/4,0);

  double seam_shirt;
  seam_shirt=arclength(264,265,263)+dist(263,261);
  double ero_shirt;
  ero_shirt=kp-seam_shirt;
  x[264]=x[264]+ero_shirt;
  x[268]=x[268]+ero_shirt;
  x[271]=x[271]+ero_shirt;
  x[273]=x[273]+ero_shirt;

  if(collar==0)
    {
    siirtox=4;
    siirtoy=2;

    current_object=newobject("poly");
    addpoint(x[264]/2.54,  y[264]/2.54,  "xarc_start");
    addpoint(x[265]/2.54,  y[265]/2.54,  "xarc_corner");
    addpoint(x[263]/2.54,  y[263]/2.54,  "line");
    current_point=addpoint(x[261]/2.54,  y[261]/2.54,  "line");
    notch_type(current_point,"NOTCH",0);
    addpoint(x[266]/2.54,  y[266]/2.54,  "line");
    addpoint(x[267]/2.54,  y[267]/2.54,  "line");
    addpoint(x[270]/2.54,  y[270]/2.54,  "xarc_start");
    addpoint(x[269]/2.54,  y[269]/2.54,  "xarc_corner");
    addpoint(x[268]/2.54,  y[268]/2.54,  "line");
    group_obj[59]=current_object;

    if (language == 0)
      {
      current_object=newobject("text","Collar Stand. Cut 2 on fold. CB--->",0.0,0.2,0.2,"SIMP.CHR");

      }

    addpoint((x[268]-21)/2.54, (y[268]-2)/2.54, "line");
    group_obj[61]=current_object;

    if(sv>0)
      {

      if (language == 0)
        {
        current_object=newobject("text","If cut on fold, remove CB seam allowance",0.0,0.2,0.2,"SIMP.CHR");

        }

      addpoint((x[268]-21)/2.54, (y[268]-3)/2.54, "line");
      group_obj[62]=current_object;

      offset_mark(59);
      select(current_selection,group_obj[61]);
      select(current_selection,group_obj[62]);
      group(current_selection);
      deselect(current_selection);
      }

    else
      {
      mark(59);

      current_selection=newselection("OBJECT");
      select(current_selection,group_obj[59]);
      select(current_selection,group_obj[61]);
      group(current_selection);
      deselect(current_selection);
      }

    current_object=newobject("poly");
    addpoint(x[271]/2.54,  (y[271]+4)/2.54, "xarc_start");
    addpoint(x[272]/2.54,  (y[272]+4)/2.54, "xarc_corner");
    addpoint(x[270]/2.54,  (y[270]+4)/2.54, "LINE");
    addpoint(x[275]/2.54,  (y[275]+4)/2.54, "xarc_start");
    addpoint(x[274]/2.54,  (y[274]+4)/2.54, "xarc_corner");
    addpoint(x[276]/2.54,  (y[276]+4)/2.54, "LINE");
    addpoint(x[273]/2.54,  (y[273]+4)/2.54, "LINE");
    group_obj[60]=current_object;

    if (language == 0)
      {
      current_object=newobject("text","Upper Collar. Cut 1 on fold. CB--->",0.0,0.2,0.2,"SIMP.CHR");

      }

    addpoint((x[273]-20)/2.54, (y[273]+2)/2.54, "line");
    group_obj[63]=current_object;

    if(sv>0)
      {

      if (language == 0)
        {
        current_object=newobject("text","If cut on fold, remove CB seam allowance",0.0,0.2,0.2,"SIMP.CHR");

        }

      addpoint((x[273]-20)/2.54, (y[273]+1)/2.54, "line");
      group_obj[64]=current_object;

      offset_mark(60);
      select(current_selection,group_obj[63]);
      select(current_selection,group_obj[64]);
      group(current_selection);
      deselect(current_selection);
      }

    else
      {
      mark(60);

      current_selection=newselection("OBJECT");
      select(current_selection,group_obj[60]);
      select(current_selection,group_obj[63]);
      group(current_selection);
      deselect(current_selection);
      }
    }

  else
    {
    current_object=newobject("poly");
    addpoint((x[200])/2.54,  (y[200])/2.54,  "line");
    addpoint((x[201])/2.54, y[201]/2.54,  "xarc_start");
    addpoint((x[202])/2.54, y[202]/2.54,  "xarc_corner");
    addpoint((x[203])/2.54, y[203]/2.54,  "line");
    addpoint((x[204])/2.54, y[204]/2.54,  "line");
    addpoint((x[210])/2.54, y[210]/2.54,  "LINE");
    addpoint((x[209])/2.54, y[209]/2.54,  "line");
    addpoint((x[208])/2.54, y[208]/2.54,  "xarc_start");
    addpoint((x[207])/2.54, y[207]/2.54,  "xarc_corner");
    addpoint((x[206])/2.54, y[206]/2.54,  "line");
    addpoint((x[205])/2.54, y[205]/2.54,  "LINE");
    group_obj[1]=current_object;

    if (language == 0)
      {
      current_object=newobject("text","Collar. Cut 1 on fold. CB--->",0.0,0.2,0.2,"SIMP.CHR");

      }

    addpoint((x[205]-21)/2.54, (y[205]-4)/2.54, "line");
    group_obj[2]=current_object;

    if(sv>0)
      {

      if (language == 0)
        {
        current_object=newobject("text","If cut on fold, remove CB seam allowance",0.0,0.2,0.2,"SIMP.CHR");

        }

      addpoint((x[205]-21)/2.54, (y[205]-5)/2.54, "line");
      group_obj[77]=current_object;

      offset_mark(1);
      select(current_selection,group_obj[2]);
      select(current_selection,group_obj[77]);
      group(current_selection);
      deselect(current_selection);
      }

    else
      {
      mark(1);

      current_selection=newselection("OBJECT");
      select(current_selection,group_obj[1]);
      select(current_selection,group_obj[2]);
      group(current_selection);
      deselect(current_selection);
      }

    siirtox=0;
    siirtoy=0;
    }

  siirtox=-5;

  int=(dist(102,5)-2)/4;

  current_object=newobject("poly");
  current_point=addpoint((x[3]+siirtox)/2.54, (y[102]-2)/2.54, "line");
  notch_type(current_point,"BTN",0);
  current_point=addpoint((x[3]+siirtox)/2.54, (y[102]-2-int)/2.54, "line");
  notch_type(current_point,"BTN",0);
  current_point=addpoint((x[3]+siirtox)/2.54, (y[102]-2-2*int)/2.54, "line");
  notch_type(current_point,"BTN",0);
  current_point=addpoint((x[3]+siirtox)/2.54, (y[102]-2-3*int)/2.54, "line");
  notch_type(current_point,"BTN",0);
  current_point=addpoint((x[3]+siirtox)/2.54, (y[102]-2-4*int)/2.54, "open");
  notch_type(current_point,"BTN",0);
  group_obj[3]=current_object;

  current_object=newobject("poly");
  addpoint((x[84]+siirtox)/2.54, (y[102])/2.54, "line");
  addpoint((x[85]+siirtox)/2.54, (y[102])/2.54, "line");
  addpoint((x[86]+siirtox)/2.54, (y[102])/2.54, "line");
  addpoint((x[87]+siirtox)/2.54, (y[87]-pit+alk)/2.54, "line");
  addpoint((x[88]+siirtox)/2.54, (y[88]-pit+alk)/2.54, "line");
  addpoint((x[89]+siirtox)/2.54, (y[89]-pit+alk)/2.54, "line");
  group_obj[66]=current_object;

  current_object=newobject("poly");
  addpoint((x[6]-nv+siirtox)/2.54, (y[102])/2.54, "line");
  addpoint((x[6]-nv+siirtox)/2.54, (y[6]-pit+alk)/2.54, "open");
  group_obj[58]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Button extension, cut 2",-1.570796,0.2,0.2,"SIMP.CHR");

    }

  addpoint((x[3]+0.2+siirtox)/2.54, (y[3]+siirtoy)/2.54, "line");
  group_obj[67]=current_object;

  if(sv>0)
    {

    offset_mark(66);
    select(current_selection,group_obj[3]);
    select(current_selection,group_obj[67]);
    select(current_selection,group_obj[58]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(66);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[66]);
    select(current_selection,group_obj[3]);
    select(current_selection,group_obj[67]);
    select(current_selection,group_obj[58]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=0;
  siirtoy=0;

  if (language == 0)
    {
    current_object=newobject("text","Center Front piece. Cut 2.",-1.570796,0.2,0.2,"SIMP.CHR");

    }

  addpoint((x[3]+nv+0.2+siirtox)/2.54, (y[3])/2.54, "line");
  group_obj[71]=current_object;

  current_object=newobject("poly");
  addpoint((x[131]+siirtox)/2.54, (y[131])/2.54, "line");
  addpoint((x[31]+siirtox)/2.54, (y[31])/2.54, "xarc_start");
  addpoint((x[23]+siirtox)/2.54, (y[23])/2.54, "xarc_corner");

  addpoint((x[102]+nv)/2.54, (y[102])/2.54, "xarc_start");
  current_point=addpoint((x[4]+nv)/2.54, (y[4])/2.54, "line");
  notch_type(current_point,"notch",0);
  current_point=addpoint((x[5]+nv)/2.54, (y[5])/2.54, "line");
  notch_type(current_point,"notch",0);
  current_point=addpoint((x[6]+nv)/2.54, (y[6])/2.54, "line");
  addpoint((x[6]+nv)/2.54, (y[6]-pit+alk)/2.54, "xarc_start");

  addpoint((x[38]+siirtox)/2.54, (y[38]-pit+alk)/2.54, "xarc_corner");
  addpoint((x[52]+siirtox)/2.54, (y[52]-pit+alk)/2.54, "line");

  if((sleeve==0)||(sleeve==1))
    {
    addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "xarc_start");
    addpoint((x[10]+siirtox)/2.54, (y[10])/2.54, "xarc_corner");
    addpoint((x[34]+siirtox)/2.54, (y[34])/2.54, "xarc_start");
    addpoint((x[36]+siirtox)/2.54, (y[36])/2.54, "xarc_corner");
    addpoint((x[33]+siirtox)/2.54, (y[33])/2.54, "line");
    }

  else
    {
    addpoint((x[11]+siirtox)/2.54, (y[11])/2.54, "xarc_start");
    addpoint((x[34]+siirtox)/2.54, (y[34])/2.54, "xarc_corner");
    addpoint((x[33]+siirtox)/2.54, (y[33])/2.54, "line");
    }

  addpoint((x[132]+siirtox)/2.54, (y[132])/2.54, "line");
  addpoint((x[30]+siirtox)/2.54, (y[30])/2.54, "line");
  group_obj[27]=current_object;

  current_object=newobject("poly");
  addpoint((x[30]+siirtox)/2.54, (y[30])/2.54, "line");
  current_point=addpoint((x[30]+siirtox)/2.54, (y[30]-5)/2.54, "open");
  notch_type(current_point,"BTN",0);

  group_obj[64]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Cut here",0.0,0.2,0.2,"SIMP.CHR");

    }

  addpoint((x[30]+1+siirtox)/2.54, (y[30]-5)/2.54, "line");
  group_obj[68]=current_object;

  if(sv>0)
    {

    offset_mark(27);

    select(current_selection,group_obj[71]);
    select(current_selection,group_obj[64]);
    select(current_selection,group_obj[68]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(27);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[27]);
    select(current_selection,group_obj[64]);

    select(current_selection,group_obj[71]);
    select(current_selection,group_obj[68]);
    group(current_selection);
    deselect(current_selection);
    }

  ang=angle(x[30],y[30],x[131],y[131])-angle(x[30],y[30],x[132],y[132]);
  rotate(83,30,ang);
  rotate(11,30,ang);
  rotate(34,30,ang);
  rotate(36,30,ang);
  rotate(10,30,ang);
  rotate(33,30,ang);
  rotate(132,30,ang);
  rotate(82,30,ang);

  siirtox=-50;

  current_object=newobject("poly");
  addpoint((x[83]+siirtox)/2.54, (y[83]+siirtoy)/2.54, "line");

  if((sleeve==0)||(sleeve==1))
    {
    addpoint((x[11]+siirtox)/2.54, (y[11]+siirtoy)/2.54, "xarc_start");
    addpoint((x[10]+siirtox)/2.54, (y[10]+siirtoy)/2.54, "xarc_corner");
    addpoint((x[34]+siirtox)/2.54, (y[34]+siirtoy)/2.54, "xarc_start");
    addpoint((x[36]+siirtox)/2.54, (y[36]+siirtoy)/2.54, "xarc_corner");
    addpoint((x[33]+siirtox)/2.54, (y[33]+siirtoy)/2.54, "line");
    }

  else
    {
    addpoint((x[11]+siirtox)/2.54, (y[11]+siirtoy)/2.54, "xarc_start");
    addpoint((x[34]+siirtox)/2.54, (y[34]+siirtoy)/2.54, "xarc_corner");
    addpoint((x[33]+siirtox)/2.54, (y[33]+siirtoy)/2.54, "line");
    }

  addpoint((x[31]+siirtox)/2.54, (y[31]+siirtoy)/2.54, "xarc_start");
  addpoint((x[23]+siirtox)/2.54, (y[23]+siirtoy)/2.54, "xarc_corner");
  addpoint((x[84]+siirtox)/2.54, (y[102]+siirtoy)/2.54, "line");
  addpoint((x[80]+siirtox)/2.54, (y[80]+siirtoy)/2.54, "xarc_start");
  addpoint((x[82]+siirtox)/2.54, (y[80]+siirtoy)/2.54, "xarc_corner");
  addpoint((x[83]+siirtox)/2.54, (y[83]+siirtoy)/2.54, "line");
  group_obj[65]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Outer Front Piece. Cut 2.",-1.570796,0.2,0.2,"SIMP.CHR");

    }

  addpoint((x[102]+nv+0.2+siirtox)/2.54, (y[102]-3+siirtoy)/2.54, "line");
  group_obj[66]=current_object;

  siirtox=0;

  if(sv>0)
    {

    offset_mark(65);
    select(current_selection,group_obj[66]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(65);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[65]);
    select(current_selection,group_obj[66]);
    group(current_selection);
    deselect(current_selection);
    }

  siirtox=8;

  if (language == 0)
    {
    current_object=newobject("text","Center Back Piece. Cut 1 on fold. CB.",-1.570796,0.2,0.2,"SIMP.CHR");

    }

  addpoint((x[13]-1+siirtox)/2.54, (y[12])/2.54, "line");
  group_obj[80]=current_object;

  if(sv>0)
    {
    if (language == 0)
      {
      current_object=newobject("text","Remove CB seam allowance",-1.570796,0.2,0.2,"SIMP.CHR");

      }

    addpoint((x[13]-2+siirtox)/2.54, (y[12])/2.54, "line");
    group_obj[81]=current_object;
    }

  current_object=newobject("poly");
  addpoint((x[14]+siirtox)/2.54, (y[14])/2.54, "line");
  addpoint((x[13]+siirtox)/2.54, (y[13])/2.54, "line");
  addpoint((x[12]+siirtox)/2.54, (y[21]-dist(21,12)/2)/2.54, "line");
  addpoint((x[21]+siirtox)/2.54, (y[21])/2.54, "xarc_start");
  addpoint((x[122]+siirtox)/2.54, (y[122])/2.54, "xarc_corner");
  addpoint((x[22]+siirtox)/2.54, (y[22])/2.54, "line");

  if((sleeve==0)||(sleeve==1))
    {
    addpoint((x[26]+siirtox)/2.54, (y[26])/2.54, "xarc_start");
    addpoint((x[37]+siirtox)/2.54, (y[37])/2.54, "xarc_corner");
    addpoint((x[35]+siirtox)/2.54, (y[35])/2.54, "xarc_start");
    addpoint((x[53]+siirtox)/2.54, (y[53])/2.54, "xarc_corner");
    }

  else
    {
    addpoint((x[26]+siirtox)/2.54, (y[26])/2.54, "xarc_start");
    addpoint((x[35]+siirtox)/2.54, (y[35])/2.54, "xarc_corner");
    }

  addpoint((x[54]+siirtox)/2.54, (y[54])/2.54, "line");
  addpoint((x[47]+siirtox)/2.54, (y[47]-pit+alk)/2.54, "line");
  addpoint((x[42]+siirtox)/2.54, (y[42]-pit+alk)/2.54, "line");
  addpoint((x[15]+siirtox)/2.54, (y[15]-pit+alk)/2.54, "line");
  addpoint((x[15]+siirtox)/2.54, (y[15])/2.54, "line");
  group_obj[45]=current_object;

  if(sv>0)
    {

    if (language == 0)
      {
      current_object=newobject("text","Check hem seam allowance",0.0,0.2,0.2,"SIMP.CHR");

      }

    addpoint((x[35]+4+siirtox)/2.54, (y[38]+1.2-pit+alk)/2.54, "line");
    group_obj[79]=current_object;

    offset_mark(45);
    select(current_selection,group_obj[80]);
    select(current_selection,group_obj[81]);

    select(current_selection,group_obj[79]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(45);

    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[45]);
    select(current_selection,group_obj[80]);
    group(current_selection);
    deselect(current_selection);
    }

  if((sleeve==0)||(sleeve==1))
    {
    ktpe=arclength(33,36,34)+arclength(34,10,11);
    ktpt=arclength(26,37,35)+arclength(35,53,54);
    }

  else
    {

    ktpe=arclength(33,10,11);

    ktpt=arclength(26,53,54);
    }

  ktp=ktpe+ktpt;

  if(sleeve==2)
    {
    pk=ktp/3-6;
    }

  else
    {
    pk=ktp/3;
    }

  coord(0,1,kay/2+6,0);

  coord(1,2,0,-pk/3);

  coord(2,3,0,-pk/3);

  coord(3,4,0,-pk/3);

  if(sleeve==2)
    {
    coord(1,5,0,-hp+6);
    }

  else
    {
    coord(1,5,0,-hp);
    }

  center(5,1,6);
  y[6]=y[6]-4;

  coord(5,7,0,-3);

  if((sleeve==0)||(sleeve==1))
    {

    coord(4,8,-kay/2+1,0);

    }

  else
    {

    coord(4,8,-kay/2-3,0);
    }

  if((sleeve==0)||(sleeve==1))
    {

    coord(4,9,kay/2+1,0);

    }

  else
    {

    coord(4,9,kay/2+3,0);
    }

  coord(5,10,-(kay/2)+2,0);
  coord(5,11,+(kay/2)-2,0);
  center(8,10,12);
  y[12]=y[6];
  center(9,11,13);
  y[13]=y[6];

  cont(12,10,14,1.5);

  center(5,10,15);

  center(5,7,16);

  coord(7,17,+(kay/4-2),0);

  cont(13,11,18,1.5);

  coord(8,19,ktl/2,0);
  coord(1,20,-5,0);
  cont(19,20,21,-dist(19,20)/3);
  cont(20,19,22,-dist(19,20)/3);
  coord(9,23,-ktl/4,0);
  coord(1,24,5,0);
  cont(23,24,25,-dist(23,24)/3);
  cont(24,23,26,-dist(23,24)/3);

  coord(1,24,5,0);
  cont(23,24,25,-dist(23,24)/3);
  cont(24,23,26,-dist(23,24)/3);
  coord(5,27,-2,0);

  coord(6,28,0,0);
  rotate (28,27,-angle(x[6],y[6],x[27]+90*3.14/180,y[27]));
  cont(28,27,28,-(ray/2-1));

  cont(28,27,29,+(ray/2+1));
  coord(12,30,2.5,0);
  coord(13,31,.5,0);

  cont(30,28,28,.5);
  cont(13,29,29,.5);

  coord(6,32,dist(12,13)/4+1,0);

  if(sleeve==2)
    {
    y[30]=y[30]+3;
    y[31]=y[31]+3;
    y[32]=y[32]+3;
    }

  coord(31,33,0,-2);
  cont(33,32,33,-dist(31,32));

  double pyorion_pituus_etu, pyorion_pituus_taka;
  pyorion_pituus_taka=arclength(9,23,26)+dist(26,25)+arclength(25,24,1);
  pyorion_pituus_etu=arclength(8,19,22)+dist(22,21)+arclength(21,20,1);

  if(sleeve==2)
    {
    x[8]=x[8]+(pyorion_pituus_etu-(ktpe));
    x[9]=x[9]-(pyorion_pituus_taka-(ktpt));

    x[33]=x[33]-(pyorion_pituus_taka-(ktpt));
    x[31]=x[31]-(pyorion_pituus_taka-(ktpt));
    x[32]=x[32]-(pyorion_pituus_taka-(ktpt));

    }

  else
    {
    x[8]=x[8]+(pyorion_pituus_etu-(ktpe+2));
    x[9]=x[9]-(pyorion_pituus_taka-(ktpt+2));

    x[33]=x[33]-(pyorion_pituus_taka-(ktpt+2));
    x[31]=x[31]-(pyorion_pituus_taka-(ktpt+2));
    x[32]=x[32]-(pyorion_pituus_taka-(ktpt+2));

    }

  current_object=newobject("poly");

  current_point=addpoint((x[1])/2.54, (y[1])/2.54, "xarc_start");
  notch_type(current_point,"NOTCH",1);
  addpoint((x[20])/2.54, (y[20])/2.54, "xarc_corner");
  addpoint((x[21])/2.54, (y[21])/2.54, "line");
  addpoint((x[22])/2.54, (y[22])/2.54, "xarc_start");
  addpoint((x[19])/2.54, (y[19])/2.54, "xarc_corner");

  if(sleeve_length==0)
    {
    if(sleeve==0)
      {
      addpoint((x[8])/2.54, (y[8])/2.54, "xarc_start");
      addpoint((x[30])/2.54, (y[30])/2.54, "xarc_corner");
      addpoint((x[28])/2.54, (y[28])/2.54, "line");
      addpoint((x[27])/2.54, (y[27])/2.54, "line");
      addpoint((x[29])/2.54, (y[29])/2.54, "line");
      addpoint((x[33])/2.54, (y[33])/2.54, "line");
      addpoint((x[32])/2.54, (y[32])/2.54, "line");
      addpoint((x[31])/2.54, (y[31])/2.54, "line");
      }

    if(sleeve>0)
      {
      addpoint((x[8])/2.54, (y[8])/2.54, "line");
      addpoint((x[14])/2.54, (y[14])/2.54, "xarc_start");
      addpoint((x[15])/2.54, (y[15])/2.54, "xarc_corner");
      addpoint((x[16])/2.54, (y[16])/2.54, "xarc_start");
      addpoint((x[17])/2.54, (y[17])/2.54, "xarc_corner");
      addpoint((x[18])/2.54, (y[18])/2.54, "line");
      }
    }

  else
    {
    addpoint((x[8])/2.54, (y[8])/2.54, "line");
    addpoint((x[8]+2)/2.54, (y[8]-10)/2.54, "line");
    addpoint((x[9]-1)/2.54, (y[9]-10)/2.54, "line");
    }

  addpoint((x[9])/2.54, (y[9])/2.54, "xarc_start");
  addpoint((x[23])/2.54, (y[23])/2.54, "xarc_corner");
  addpoint((x[26])/2.54, (y[26])/2.54, "line");
  addpoint((x[25])/2.54, (y[25])/2.54, "xarc_start");
  addpoint((x[24])/2.54, (y[24])/2.54, "xarc_corner");
  group_obj[46]=current_object;

  if((sleeve>0)&&(sleeve_length==0))
    {
    current_object=newobject("poly");
    addpoint((x[17])/2.54, (y[17])/2.54, "line");
    addpoint((x[17])/2.54, (y[17]+10)/2.54, "open");
    group_obj[52]=current_object;
    }

  current_object=newobject("poly");

  if(sleeve_length==1)
    {
    if((sleeve==0)||(sleeve==1))
      {
      addpoint((x[1])/2.54, (y[1])/2.54, "line");
      }

    else
      {
      addpoint((x[1])/2.54, (y[1]-3)/2.54, "line");
      }

    addpoint((x[1])/2.54, (y[8]-10)/2.54, "open");
    }

  else
    {
    if((sleeve==0)||(sleeve==1))
      {
      addpoint((x[1])/2.54, (y[1])/2.54, "line");
      }

    else
      {
      addpoint((x[1])/2.54, (y[1]-3)/2.54, "line");
      }

    addpoint((x[1])/2.54, (y[6])/2.54, "open");
    }

  group_obj[47]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Sleeve Front",0.0,0.2,0.2,"SIMP.CHR");

    }

  addpoint((x[19]+2)/2.54, (y[19]+2)/2.54, "line");
  group_obj[48]=current_object;

  if (language == 0)
    {
    current_object=newobject("text","Sleeve Back",0.0,0.2,0.2,"SIMP.CHR");

    }

  addpoint((x[26]-3)/2.54, (y[19]+2)/2.54, "line");
  group_obj[49]=current_object;

  if((sleeve==0)||(sleeve==1))
    {
    if (language == 0)
      {
      current_object=newobject("text","Sleeve. Cut 2. Shoulder.",-1.570796,0.2,0.2,"SIMP.CHR");

      }

    addpoint((x[1]+0.2)/2.54, (y[1]-1)/2.54, "line");
    group_obj[50]=current_object;
    }

  else
    {
    if (language == 0)
      {
      current_object=newobject("text","Sleeve. Cut 2. Shoulder.",-1.570796,0.2,0.2,"SIMP.CHR");

      }

    addpoint((x[1]+0.2)/2.54, (y[1]-7)/2.54, "line");
    group_obj[51]=current_object;
    }

  if(sv>0)
    {

    offset_mark(46);
    select(current_selection,group_obj[47]);
    select(current_selection,group_obj[48]);
    select(current_selection,group_obj[49]);

    if((sleeve==0)||(sleeve==1))
      {
      select(current_selection,group_obj[50]);
      }

    else
      {
      select(current_selection,group_obj[51]);
      }

//      if((sleeve==1)&&(sleeve_length==0))
    if((sleeve>0)&&(sleeve_length==0))
      {
      select(current_selection,group_obj[52]);
      }

    group(current_selection);
    deselect(current_selection);
    }

  else
    {
    mark(46);
    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[46]);
    select(current_selection,group_obj[47]);
    select(current_selection,group_obj[48]);
    select(current_selection,group_obj[49]);

    if((sleeve==0)||(sleeve==1))
      {
      select(current_selection,group_obj[50]);
      }

    else
      {
      select(current_selection,group_obj[51]);
      }

//      if((sleeve==1)&&(sleeve_length==0))
    if((sleeve>0)&&(sleeve_length==0))
      {
      select(current_selection,group_obj[52]);
      }

    group(current_selection);
    deselect(current_selection);
    }

  if((sleeve>0)&&(sleeve_length==0))
    {
    siirtox=0;
    siirtoy=-7;

    current_object=newobject("poly");
    addpoint((x[7]-2+siirtox)/2.54, (y[7]+siirtoy)/2.54, "line");
    addpoint((x[7]+2+mansetti+siirtox)/2.54, (y[7]+siirtoy)/2.54, "line");
    addpoint((x[7]+2+mansetti+siirtox)/2.54, (y[7]-6+siirtoy)/2.54, "line");
    addpoint((x[7]-2+siirtox)/2.54, (y[7]-6+siirtoy)/2.54, "line");
    group_obj[53]=current_object;

    current_object=newobject("poly");
    addpoint((x[7]+siirtox)/2.54, (y[7]+siirtoy)/2.54, "line");
    addpoint((x[7]+siirtox)/2.54, (y[7]-6+siirtoy)/2.54, "open");
    group_obj[54]=current_object;

    current_object=newobject("poly");
    addpoint((x[7]+mansetti+siirtox)/2.54, (y[7]+siirtoy)/2.54, "line");
    addpoint((x[7]+mansetti+siirtox)/2.54, (y[7]-6+siirtoy)/2.54, "open");
    group_obj[55]=current_object;

    current_object=newobject("poly");
    current_point=addpoint((x[7]+siirtox)/2.54, (y[7]-3+siirtoy)/2.54, "line");
    notch_type(current_point,"BTN",0);
    addpoint((x[7]+mansetti+siirtox)/2.54, (y[7]-3+siirtoy)/2.54, "open");
    group_obj[56]=current_object;

    if (language == 0)
      {
      current_object=newobject("text","Sleeve cuff, Cut 2.",0.0,0.2,0.2,"SIMP.CHR");

      }

    addpoint((x[7]+2+siirtox)/2.54, (y[7]-1+siirtoy)/2.54, "line");
    group_obj[57]=current_object;

    if(sv>0)
      {

      offset_mark(53);
      select(current_selection,group_obj[54]);
      select(current_selection,group_obj[55]);
      select(current_selection,group_obj[56]);
      select(current_selection,group_obj[57]);
      group(current_selection);
      deselect(current_selection);
      }

    else
      {
      mark(53);

      current_selection=newselection("OBJECT");
      select(current_selection,group_obj[53]);
      select(current_selection,group_obj[54]);
      select(current_selection,group_obj[55]);
      select(current_selection,group_obj[56]);
      select(current_selection,group_obj[57]);
      group(current_selection);
      deselect(current_selection);
      }
    }

  current_selection=newselection("OBJECT");

  for (loop = 0; loop < 20; loop = loop + 1)
    {
    if (marker_array[loop] != 0)
      {
      select(current_selection, marker_array[loop]);
      }
    }

  check_overlap(current_selection);

  if (is_function("origin_arrange")==1)
    {
    origin_arrange(current_selection);
    }

  deselect(current_selection);

  if (is_function("set_marker")==1)
    {
    for (loop = 0; loop < 20; loop = loop + 1)
      {
      if (marker_array[loop] != 0)
        {
        set_marker(marker_array[loop], 0);
        }
      }
    }

  run_command("zoomall");
  }

newobj_dot(double x, double y)
  {
  object temp;
  line("CENTER_LINE");
  temp = newobject("poly");
  addpoint(x, y, "line");
  line("SOLID_LINE");
  return temp;
  }

coord(double orig, double dest, double xxx, double yyy)
  {
  x[dest]=x[orig]+xxx;
  y[dest]=y[orig]+yyy;
  }

center(double one, double two, double result)
  {
  x[result]=(x[one]+x[two])/2;
  y[result]=(y[one]+y[two])/2;
  }

dist(double p1, double p2)
  {
  return distance(x[p1],y[p1],x[p2],y[p2]);
  }

line_intersect(double start1, double end1, double start2, double end2, double dest)
  {
  double tempx;
  double tempy;

  intersect(x[start1],y[start1],x[end1],y[end1],x[start2],y[start2],x[end2],y[end2],0);
  x[dest]=getresultx();
  y[dest]=getresulty();
  }

cont(double cstart, double cend, double cdest, double cvdistanceance)
  {
  double ang;

  ang=angle(x[cstart], y[cstart], x[cend], y[cend]);
  polar(x[cend], y[cend], ang, cvdistanceance);
  x[cdest]=getresultx();
  y[cdest]=getresulty();
  }

mark(double pass_index)
  {
  group_obj[pass_index]=marker_piece(group_obj[pass_index],1);
  marker_array[marker_count] = group_obj[pass_index];
  marker_count = marker_count + 1;
  }

offset_mark(double pass_index)
  {
  point pnt, test;
  double save_x, save_y;

  current_selection=newselection("OBJECT");
  select(current_selection,group_obj[pass_index]);
  sel_push(current_selection);
  var_push(sv);
  run_command("OFFSET");
  deselect(current_selection);
  current_object=last_obj();

  marker_array[marker_count] = marker_piece(current_object,1);
  current_selection=newselection("OBJECT");
  select(current_selection, marker_array[marker_count]);
  select(current_selection, group_obj[pass_index]);
  marker_count = marker_count + 1;
  }

Forward()
  {
  index = index + 1;

  if (index == 5)
    {
    done = 1;
    }
  }

Backward()
  {
  index = index - 1;
  }

Popup1()
  {
  if (language == 0)
    {
    start_pict_dialog("BUST EASE");
    add_pict_item("Normal (+6.25in/+16cm)","blank.jpg");
    add_pict_item("Minimum (+5.5in/+14cm)","blank.jpg");
    add_pict_item("Maximum (+7in/+18cm)","blank.jpg");
    run_pict("Next");
    ease=get_pict_result();
    Forward();
    }
  }

Popup2()
  {
  if (language == 0)
    {
    start_pict_dialog("COLLAR STYLE");
    add_pict_item("Shirt collar","mn_nshirt_collar_shirt.jpg");
    add_pict_item("Convertible collar","mn_nshirt_collar_conv.jpg");

    if (run_pict("Back","Next"))
      {
      collar=get_pict_result();
      Forward();
      }

    else
      {
      collar=0;
      Backward();
      }
    }
  }

Popup3()
  {
  if (language == 0)
    {
    start_pict_dialog("SLEEVE STYLE");
    add_pict_item("Fitted sleeve","mn_nshirt_slv-fit.jpg");
    add_pict_item("Shirt sleeve","mn_nshirt_slv-shirt.jpg");
    add_pict_item("Dropped sleeve","mn_nshirt_slv-drop.jpg");

    if (run_pict("Back","Next"))
      {
      sleeve=get_pict_result();
      Forward();
      }

    else
      {
      sleeve=0;
      Backward();
      }
    }
  }

Popup4()
  {
  if (language == 0)
    {
    start_pict_dialog("SLEEVE LENGTH");
    add_pict_item("Long","mn_nshirt_ls.jpg");
    add_pict_item("Short","mn_nshirt_ss.jpg");

    if (run_pict("Back","Next"))
      {
      sleeve_length=get_pict_result();
      Forward();
      }

    else
      {
      sleeve_length=0;
      Backward();
      }
    }
  }

Popup5()
  {
  if (language == 0)
    {
    start_pict_dialog("SHOULDER PAD EASE?");
    add_pict_item("Shoulder pads","mn_nshirt_sp.jpg");
    add_pict_item("No shoulder pads","mn_nshirt_sp_no.jpg");

    if (run_pict("Back","Next"))
      {
      shoulder_padding=get_pict_result();
      Forward();
      }

    else
      {
      shoulder_padding=0;
      Backward();
      }
    }
  }

shift(double orig, double xxx, double yyy)
  {
  x[orig]=x[orig]+xxx;
  y[orig]=y[orig]+yyy;
  }

rotate(double rpoint,double rcenter, double rangle)
  {
  double vdistance, vang;

  vdistance=dist(rpoint, rcenter);
  vang=angle(x[rcenter],y[rcenter],x[rpoint],y[rpoint]);
  polar(x[rcenter],y[rcenter],vang+rangle,vdistance);
  x[rpoint]=getresultx();
  y[rpoint]=getresulty();
  }

linecirc(double PA,double  PB,double  PC,double  dradius,double  which, double PD)
  {
  double  mslope, dist0, dist1, dist2, xtemp;
  double tx, ty;
  xtemp = (x[PB]-x[PC])*(x[PB]-x[PC]);

  if (xtemp > 0)
    {
    xtemp = (y[PB]-y[PC])*(y[PB]-y[PC]);

    if ( xtemp > 0)
      {
      mslope = (y[PC] - y[PB])/(x[PC] - x[PB]);
      tx = x[PA] + 1;
      ty = y[PA] - 1/mslope;
      intersect(x[PA], y[PA], tx, ty, x[PB], y[PB], x[PC], y[PC], 0);
      tx = getresultx();
      ty = getresulty();
      dist1 = distance(x[PA], y[PA], tx, ty);
      dist2 = interceptline(0, dist1, dradius);
      dist0 = sqrt(1+mslope*mslope);
      xtemp = dist2/dist0;

      if (which)
        {
        x[PD] = tx+xtemp;
        y[PD] = ty+ xtemp*mslope;
        }

      else
        {
        x[PD] =  tx-xtemp;
        y[PD] = ty- xtemp*mslope;
        }
      }

    else
      {
      x[PD] = x[PB];

      if (which)
        {
        y[PD] = y[PA] + interceptline(x[PA], x[PB], dradius);
        }

      else
        {
        y[PD] = y[PA] - interceptline(x[PA], x[PB], dradius);
        }
      }
    }

  else
    {
    y[PD] = y[PB];

    if (which)
      {
      x[PD] = x[PA] + interceptline(y[PA], y[PB], dradius);
      }

    else
      {
      x[PD] = x[PA] - interceptline(y[PA], y[PB], dradius);
      }
    }
  }

double xar[13], yar[13];
double save_rx, save_ry;

arclength(double start, double corner, double end)
  {

  double ct, last_x, last_y;
  double a_dist;

  last_x = x[start];
  last_y = y[start];

  a_dist=0;

  for (ct=1; ct < 12; ct = ct + 1)
    {
    fts(start, corner, end, ct);
    a_dist = a_dist + distance(save_rx, save_ry, last_x, last_y);
    last_x=save_rx;
    last_y=save_ry;
    }

  return a_dist;
  }

double A1, A2, B1, B2;
double sx, sy, cx, cy, ex, ey;

double t0[2], t1[2];
double ftc[2];
fts(double start, double corner, double end, double pos)
  {
  if (pos<1)
    {
    save_rx=x[start];
    save_ry=y[start];
    }

  else
    {
    if (pos<2)
      {
      sx = x[start];
      sy = y[start];
      cx = x[corner];
      cy = y[corner];
      ex = x[end];
      ey = y[end];

      A1=cx - sx;
      A2=cy - sy;
      B1=cx - ex;
      B2=cy - ey;

      A1=-A1;
      B1=-B1;
      A2=-A2;
      B2=-B2;

      t0[0]=A1;
      t0[1]=B1;
      t1[0]=A2;
      t1[1]=B2;

      ftc[0]= cx + (t0[0] + t0[1]);
      ftc[1]= cy + (t1[0] + t1[1]);

      save_rx = t0[0]*(xar[pos])+t0[1]*(yar[pos])+ ftc[0];
      save_ry = t1[0]*(xar[pos])+t1[1]*(yar[pos])+ ftc[1];
      }

    else
      {
      if (pos>10)
        {
        save_rx=x[end];
        save_ry=y[end];
        }

      else
        {
        save_rx = t0[0]*(xar[pos])+t0[1]*(yar[pos])+ ftc[0];
        save_ry = t1[0]*(xar[pos])+t1[1]*(yar[pos])+ ftc[1];
        }
      }
    }
  }

init_xarc_array()
  {

  double ang_start, ang_end, step, theta, ct;
  double XARC_PIECES;
  XARC_PIECES = 12;

  ang_start = -3.14159/2;
  ang_end= -3.14159;

  ct=0;

  step= (ang_end - ang_start)/(XARC_PIECES-1);

  for (theta=ang_start; ct < XARC_PIECES; theta = theta + step)
    {
    xar[ct] = cos(theta);
    yar[ct] = sin(theta);
    ct=ct+1;
    }

  }

max(double aa, double bb)
  {
  if (aa > bb)
    {
    return aa;
    }

  else
    {
    return bb;
    }
  }

min(double aa, double bb)
  {
  if (aa < bb)
    {
    return aa;
    }

  else
    {
    return bb;
    }
  }