// Copyright (C) 2001 Leena L�hteenm�ki, Finland
// Copyright (C) 2015 PatternMaker Software
// 2015/09/02
// 2017-07-17 Added 4 blank lines at end of file

selection current_selection;
object current_object, group_obj[100];
point current_point;
double result;
double index, done;
object marker_array[20];
double marker_count, loop;
double metric, sv;
double read;
double ang;
double kork;

double ky,ry,vy,yly,aly,rkkv,rk,vk,sp,sl,op;
double ylk,alk,kay,ray,hp;
double eml, tml, sml, smlyly,smlaly;
double ktk,ktl,ptl,ptp,ptl,pts,rl,pk;
double okt,oke;
double ktpe,ktpt,ktp,kpe,kpt,kp,nv;
double pit;
double language;
double ease, f_ry[3],f_ky[3],f_vy[3],f_yly[3],f_aly[3],f_rkkv[3],f_sl[3];
double f_op[3],f_vk[3],f_rk[3],f_rl[3],f_sp[3],f_ktk[3];
double f_kay[3],f_ray[3],f_hp[3];
double x[200], y[200];
double ang,vang,vdistance,rangle;
double ptke, ptkt;

main()
  {
  language=get_language();
  if ( language != 0 ) { language = 0; }
  if (language == 0)
    {
    check_reg(0, "Leena","G1macros", "This macro needs to be properly installed before running it.");
    }

  ry=85;
  ky=35.75;
  vy=72;
  aly=91;
  sp=41.5;
  op=13.2;
  sl=36;
  kay=30;
  ray=16;
  hp=59.5;

//Start Options
  while (!done)
    {
    if (index==0) {  Popup1();  }
    }

//End Options

  if (is_function("unit_mode")==1)
    {
    metric = unit_mode();

    if (!metric)
      {
      ky=ky/2.54;
      ry=ry/2.54;
      vy=vy/2.54;
      yly=yly/2.54;
      aly=aly/2.54;
      rkkv=rkkv/2.54;
      vk=vk/2.54;
      sp=sp/2.54;
      sl=sl/2.54;
      op=op/2.54;
      ylk=ylk/2.54;
      alk=alk/2.54;
      rk=rk/2.54;
      kay=kay/2.54;
      ray=ray/2.54;
      hp=hp/2.54;
      pit=pit/2.54;
      }
    }

  else
    {
    if (language == 0)
      {
      metric=2*pop_up("UNITS","Inches","Centimeters");

      }


    if (metric<1)
      {
      ky=ky/2.54;
      ry=ry/2.54;
      vy=vy/2.54;
      yly=yly/2.54;
      aly=aly/2.54;
      rkkv=rkkv/2.54;
      vk=vk/2.54;
      sp=sp/2.54;
      sl=sl/2.54;
      op=op/2.54;
      ylk=ylk/2.54;
      alk=alk/2.54;
      rk=rk/2.54;
      kay=kay/2.54;
      ray=ray/2.54;
      hp=hp/2.54;
      pit=pit/2.54;
      }
    }

  if(metric==0)
    {
    sv=0.39;
    }

  yly=aly;

  read = 0;

  if (is_function("measure_table")==1)
    {
    if (measure_table("Leena_default_juniors")==1)
      {
      read = 1;
      }
    }

  if (read==0)
    {
    if (is_function("start_picture_input"))
      {
      if (language == 0)
        {
        start_picture_input("JUNIORS' SHIRT");

        }


      if (language == 0)
        {
        add_picture_input("Neck circumference",ky, "w_meas_neckcirc");

        }

      if (language == 0)
        {
        add_picture_input("Bust circumference", ry, "w_meas_bustcirc");

        }

      if (language == 0)
        {
        add_picture_input("Waist circumference", vy, "w_meas_waistcirc");

        }

      if (language == 0)
        {
        add_picture_input("Abdomen circumference",yly, "w_meas_abdmcirc");

        }

      if (language == 0)
        {
        add_picture_input("Hip circumference",aly, "w_meas_hipcirc");

        }

      if (language == 0)
        {
        add_picture_input("Back length",sp, "w_meas_bklength");

        }

      if (language == 0)
        {
        add_picture_input("Back width",sl, "w_meas_bkwidth");

        }

      if (language == 0)
        {
        add_picture_input("Shoulder length",op, "w_meas_shldr");

        }

      if (language == 0)
        {
        add_picture_input("Biceps circumference",kay, "w_meas_biceps");

        }

      if (language == 0)
        {
        add_picture_input("Wrist circumference",ray, "w_meas_wrist");

        }

      if (language == 0)
        {
        add_picture_input("Overarm length",hp, "w_meas_overarm");

        }

      if (language == 0)
        {
        add_picture_input("Seam Allowance", sv, "meas_seamallow");

        }

      run_picture_input();
      }

    else
      {
      if (language == 0)
        {
        dialog_box( "JUNIORS' SHIRT, 1 of 2",
                    "Neck circumference.",ky,
                    "Bust circumference", ry,
                    "Waist circumference", vy,
                    "Abdomen circumference",yly,
                    "Hip circumference",aly,
                    "Back length",sp,
                    "Back width",sl,
                    "Shoulder length",op,
                    "Biceps circumference",kay,
                    "Wrist circumference",ray);

        }



      if (language == 0)
        {
        dialog_box( "JUNIORS' SHIRT, 2 of 2",
                    "Overarm length",hp,
                    "Seam Allowance", sv);

        }



      }
    }

  else
    {
    if (is_function("start_picture_input"))
      {
      if (language == 0)
        {
        start_picture_input("CUSTOM MEASUREMENTS");

        }


      if (language == 0)
        {
        add_picture_input("Seam Allowance", sv, "meas_seamallow");

        }

      run_picture_input();
      }

    else
      {
      if (language == 0)
        {
        dialog_box( "CUSTOM MEASUREMENTS",
                    "Seam Allowance", sv);

        }



      }
    }

  if (is_function("unit_mode")==1)
    {
    metric = unit_mode();

    if (!metric)
      {
      ky=ky*2.54;
      ry=ry*2.54;
      vy=vy*2.54;
      yly=yly*2.54;
      aly=aly*2.54;
      rkkv=rkkv*2.54;
      vk=vk*2.54;
      sp=sp*2.54;
      sl=sl*2.54;
      op=op*2.54;
      ylk=ylk*2.54;
      alk=alk*2.54;
      rk=rk*2.54;
      kay=kay*2.54;
      ray=ray*2.54;
      hp=hp*2.54;
      pit=pit*2.54;
      }
    }

  else
    {
    if (metric<1)
      {
      ky=ky*2.54;
      ry=ry*2.54;
      vy=vy*2.54;
      yly=yly*2.54;
      aly=aly*2.54;
      rkkv=rkkv*2.54;
      vk=vk*2.54;
      sp=sp*2.54;
      sl=sl*2.54;
      op=op*2.54;
      ylk=ylk*2.54;
      alk=alk*2.54;
      rk=rk*2.54;
      kay=kay*2.54;
      ray=ray*2.54;
      hp=hp*2.54;
      pit=pit*2.54;
      }
    }

  f_ry[1]=ry+14;
  f_ky[1]=ky+1.5;
  f_vy[1]=vy+12;
  f_yly[1]=yly+2+10;
  f_aly[1]=aly+2+10;
  f_rkkv[1]=rkkv+1.4;
  f_sl[1]=sl+3.4;
  f_op[1]=op;
  f_vk[1]=vk;
  f_rk[1]=rk;
  f_rl[1]=rl+0.3;
  f_sp[1]=sp;
  f_ktk[1]=ktk+3;
  f_kay[1]=kay+10;
  f_ray[1]=ray+10;
  f_hp[1]=hp+0.75;

  f_ry[0]=ry+16;
  f_ky[0]=ky+3;
  f_vy[0]=vy+14;
  f_yly[0]=yly+2+12;
  f_aly[0]=aly+2+12;
  f_rkkv[0]=rkkv+1.6;
  f_sl[0]=sl+4;
  f_op[0]=op+0.2;
  f_vk[0]=vk+0.5;
  f_rk[0]=rk+0.5;
  f_rl[0]=rl+0.4;
  f_sp[0]=sp+0.5;
  f_ktk[0]=ktk+3.5;
  f_kay[0]=kay+11;
  f_ray[0]=ray+11;
  f_hp[0]=hp+1;

  f_ry[2]=ry+18;
  f_ky[2]=ky+3.75;
  f_vy[2]=vy+16;
  f_yly[2]=yly+2+14;
  f_aly[2]=aly+2+14;
  f_rkkv[2]=rkkv+1.8;
  f_sl[2]=sl+4.6;
  f_op[2]=op+0.4;
  f_vk[2]=vk+0.5;
  f_rk[2]=rk+0.5;
  f_rl[2]=rl+0.5;
  f_sp[2]=sp+0.5;
  f_ktk[2]=ktk+4;
  f_kay[2]=kay+12;
  f_ray[2]=ray+12;
  f_hp[2]=hp+1.25;

  ry=f_ry[ease];
  ky=f_ky[ease];
  vy=f_vy[ease];
  yly=f_yly[ease];
  aly=f_aly[ease];
  rkkv=f_rkkv[ease];
  sl=f_sl[ease];
  op=f_op[ease];
  vk=f_vk[ease];
  rk=f_rk[ease];
  rl=f_rl[ease];
  sp=f_sp[ease];
  ktk=f_ktk[ease];
  kay=f_kay[ease];
  ray=f_ray[ease];

  if(metric==2)
    {
    sv=sv/2.54;
    }

  oke=2;
  okt=1.5;

  if (ry < 73)
    {  rl=1.5;  }

  else
    {
    if (ry < 76)
      {  rl=1.75;  }

    else
      {
      if (ry < 79)
        {  rl=2;  }

      else
        {
        if (ry < 82)
          {  rl=2.25;  }

        else
          {
          if (ry < 85)
            {  rl=2.5;  }

          else
            {
            if (ry < 85)
              {  rl=2.75;  }

            else
              {
              if (ry < 88)
                {  rl=3;  }
              }
            }
          }
        }
      }
    }

  if (ry < 73)
    {  ray=14;  }

  else
    {
    if (ry < 76)
      {  ray=14.5;  }

    else
      {
      if (ry < 79)
        {  ray=15;  }

      else
        {
        if (ry < 82)
          {  ray=15.5;  }

        else
          {
          if (ry < 85)
            {  ray=16;  }

          else
            {
            if (ry < 85)
              {  ray=16.5;  }

            else
              {
              if (ry < 88)
                {  ray=17;  }
              }
            }
          }
        }
      }
    }

  if (ry < 82)
    {  ptke=2.75;  }

  else
    {  ptke=3;  }

  ry=ry+16;
  ky=ky+5;
  vy=vy+14;
  yly=yly+12+2;
  aly=aly+12;
  rkkv=rkkv+0;
  sl=sl+4;
  op=op+2;
  vk=vk+0;
  rk=rk+0;
  sp=sp+0;
  ktk=ktk+4;
  rl=rl+0;
  kay=kay+10;
  ray=ray+4;

  pts=ky/5;
  ptl=ky/5-0.5;
  eml=(ry/2-vy/2)/4;
  sml=(ry/2-vy/2)/2;
  smlyly=ry/2-yly/2;
  smlaly=ry/2-aly/2;
  tml=(ry/2-vy/2)/4;

  rkkv=ry/5;
  ktl=ry/8-0.5;
  yly=aly;
  ktk=ry/4-2;
  alk=ktk-2;
  ylk=alk/2;
  rk=ktk+ptke+pts+1;
  vk=sp+ptke+pts+1;

  hp=hp-4;
  nv=1.5;
  pit=30;

  x[0]=0;
  y[0]=0;

  coord(0,1,0,0);
  coord(1,2,-ry/2,0);
  coord(2,3,0,-ktk);
  coord(2,4,0,-sp);
  coord(4,5,0,-ylk);
  coord(4,6,0,-alk);
  coord(1,7,-sl/2,0);
  coord(7,8,-ktl,0);
  coord(7,9,0,-ktk);
  coord(9,10,-ktl,0);
  coord(9,11,-ktl/2,0);
  coord(1,12,0,-ktk);
  coord(1,13,0,-sp);
  coord(13,14,0,-ylk);
  coord(13,15,0,-alk);
  coord(13,16,-sl/2-ktl/2,0);
  coord(14,17,-sl/2-ktl/2,0);
  coord(15,18,-sl/2-ktl/2,0);
  coord(3,19,rkkv/2,0);
  coord(4,20,rkkv/2,0);
  coord(1,21,0,.5);
  coord(1,22,-ptl,2.5);
  coord(22,122,0,-2.5);
  coord(1,24,0,-okt);
  coord(24,124,-100,0);
  coord(1,25,0,-oke);
  coord(25,125,-100,0);
  coord(22,26,-sqrt((op)*(op)-(okt+2.5)*(okt+2.5)),-(okt+2.5));
  coord(23,123,0,100);
  cont(26,22,27,-4);
  coord(1,28,-rkkv/2,-7);
  cont(28,27,127,.6);
  cont(26,22,29,-6);
  coord(127,129,0,0);
  ang=angle(x[28],y[28],x[27],y[27])-angle(x[28],y[28],x[29],y[29]);
  rotate(129,28,-ang);
  coord(20,30,0,vk-rk);
  init_xarc_array();
  ptp=arclength(21,122,22);
  coord(30,31,-rkkv/2+ptl,sqrt((rk-ptp)*(rk-ptp)-(rkkv/2-ptl)*(rkkv/2-ptl)));
  coord(31,32,0,0);
  ang=angle(x[30],y[30],x[31],y[31])-angle(x[30],y[30],x[31]+rl,y[31]);
  rotate(32,30,-ang);
  x[123]=x[31];
  y[123]=y[24];
  oke=dist(31,123);
  coord(31,33,sqrt((op)*(op)-oke*oke),-oke);
  cont(33,31,131,-4);
  cont(33,32,132,-4);
  coord(10,34,0,ktk/4);
  coord(9,35,0,ktk/4);
  coord(8,36,0,-ktk/2);
  coord(7,37,0,-ktk/2);
  coord(31,102,-ptl,-pts);
  y[23]=y[102];
  coord(102,23,ptl,0);
  coord(6,38,rkkv/2,0);
  coord(38,39,0,(alk-ylk)/2);
  coord(20,40,-eml/2,0);
  coord(20,41,eml/2,0);
  coord(15,42,-rkkv/2,0);
  coord(42,43,0,(alk-ylk)/2);
  coord(13,44,-rkkv/2-tml/2,0);
  coord(12,45,-rkkv/2,-2);
  coord(44,46,tml,0);
  coord(18,47,smlaly/2,0);
  coord(16,49,sml/2,0);
  coord(16,50,-sml/2,0);
  coord(17,51,-smlyly/2,0);
  coord(18,52,-smlaly/2,0);

  x[34]=x[34]-2;
  x[36]=x[36]-2;
  y[10]=y[10]+1.3;
  y[11]=y[11]+1.3;
  y[52]=y[52]+1.3;

  init_xarc_array();
  kpe=arclength(102,23,31);
  kpt=arclength(21,122,22);

  group_obj[0] = newobj_dot();
  addpoint((x[102]-nv)/2.54, (y[102])/2.54, "line");
  addpoint((x[102]-nv)/2.54, (y[6]-(pit-alk))/2.54, "line");

  group_obj[1] = newobject("poly");
  addpoint((x[102])/2.54, (y[102])/2.54, "line");
  addpoint((x[102])/2.54, (y[6]-(pit-alk))/2.54, "line");

  group_obj[2] = newobject("poly");
  addpoint((x[102])/2.54, (y[102])/2.54, "line");
  addpoint((x[102]-nv)/2.54, (y[102])/2.54, "xarc_start");
  addpoint((x[102]-2*nv)/2.54, (y[102])/2.54, "xarc_corner");
  addpoint((x[102]-3*nv)/2.54, (y[102]+.5)/2.54, "line");
  addpoint((x[102]-3*nv)/2.54, (y[6]-(pit-alk))/2.54, "line");
  addpoint((x[102])/2.54, (y[6]-(pit-alk))/2.54, "line");
  addpoint((x[38])/2.54, (y[38]-(pit-alk))/2.54, "xarc_start");
  center(38,52,138);
  y[138]=y[38];
  addpoint((x[138])/2.54, (y[138]-(pit-alk))/2.54, "xarc_corner");
  addpoint((x[52])/2.54, (y[52]-(pit-alk))/2.54, "line");
  addpoint((x[52])/2.54, (y[52])/2.54, "line");
  addpoint((x[11])/2.54, (y[11])/2.54, "xarc_start");
  addpoint((x[10])/2.54, (y[10])/2.54, "xarc_corner");

  addpoint((x[10])/2.54, (y[34])/2.54, "xarc_start");
  addpoint((x[10])/2.54, (y[36])/2.54, "xarc_corner");
  addpoint((x[33])/2.54, (y[33])/2.54, "line");
  addpoint((x[31])/2.54, (y[31])/2.54, "xarc_start");
  addpoint((x[23])/2.54, (y[102])/2.54, "xarc_corner");

  group_obj[3] = newobject("poly");
  addpoint((x[21]+5)/2.54, (y[21])/2.54, "xarc_start");
  addpoint((x[122]+5)/2.54, (y[122])/2.54, "xarc_corner");
  addpoint((x[22]+5)/2.54, (y[22])/2.54, "line");
  addpoint((x[26]+5)/2.54, (y[26])/2.54, "xarc_start");
  addpoint((x[37]+5)/2.54, (y[37])/2.54, "xarc_corner");
  addpoint((x[35]+5)/2.54, (y[35])/2.54, "xarc_start");
  addpoint((x[9]+5)/2.54, (y[9])/2.54, "xarc_corner");
  addpoint((x[11]+5)/2.54, (y[11])/2.54, "line");
  addpoint((x[47]+5)/2.54, (y[47])/2.54, "line");
  y[47]=y[52];
  y[15]=y[52];
  addpoint((x[47]+5)/2.54, (y[47]-(pit-alk))/2.54, "line");
  addpoint((x[15]+5)/2.54, (y[15]-(pit-alk))/2.54, "line");
  addpoint((x[15]+5)/2.54, (y[15])/2.54, "line");
  addpoint((x[14]+5)/2.54, (y[14])/2.54, "line");
  addpoint((x[13]+5)/2.54, (y[13])/2.54, "line");
  addpoint((x[12]+5)/2.54, (y[12])/2.54, "line");

  ktpe=arclength(33,36,34)+arclength(34,10,11);
  ktpt=arclength(26,37,35)+arclength(35,9,11);
  ktp=ktpe+ktpt;
  pk=ktp/3-4;

  coord(0,1,kay/2+10,0);
  coord(1,2,0,-pk/3);
  coord(2,3,0,-pk/3);
  coord(3,4,0,-pk/3);
  coord(1,5,0,-hp);
  center(5,1,6);
  y[6]=y[6]-4;
  coord(5,7,0,-3);
  coord(4,8,-sqrt(ktpe*ktpe-pk*pk)+1.5,0);
  coord(4,9,sqrt(ktpt*ktpt-pk*pk),0);
  coord(5,10,-(kay/2-2),0);
  coord(5,11,+(kay/2-2),0);
  center(8,10,12);
  y[12]=y[6];
  center(9,11,13);
  y[13]=y[6];
  cont(12,10,14,1.5);
  center(5,10,15);
  center(5,7,16);
  coord(7,17,+((kay-2)/4),0);
  cont(13,11,18,1.5);
  coord(8,19,ktl/2,0);
  coord(1,20,-5,0);
  cont(19,20,21,-dist(19,20)/3);
  cont(20,19,22,-dist(19,20)/3);
  coord(9,23,-ktl/4,0);
  coord(1,24,5,0);
  cont(23,24,25,-dist(23,24)/3);
  cont(24,23,26,-dist(23,24)/3);

  group_obj[4] = newobject("poly");
  addpoint((x[1])/2.54, (y[1])/2.54, "xarc_start");
  addpoint((x[20])/2.54, (y[20])/2.54, "xarc_corner");
  addpoint((x[21])/2.54, (y[21])/2.54, "line");
  addpoint((x[22])/2.54, (y[22])/2.54, "xarc_start");
  addpoint((x[19])/2.54, (y[19])/2.54, "xarc_corner");
  addpoint((x[8])/2.54, (y[8])/2.54, "line");
  addpoint((x[12])/2.54, (y[12])/2.54, "line");
  addpoint((x[10])/2.54, (y[10])/2.54, "line");
  addpoint((x[14])/2.54, (y[14])/2.54, "xarc_start");
  addpoint((x[15])/2.54, (y[15])/2.54, "xarc_corner");
  center(15,17,16);
  addpoint((x[16])/2.54, (y[16])/2.54, "xarc_start");
  addpoint((x[17])/2.54, (y[17])/2.54, "xarc_corner");
  addpoint((x[18])/2.54, (y[18])/2.54, "line");
  addpoint((x[11])/2.54, (y[11])/2.54, "line");
  addpoint((x[13])/2.54, (y[13])/2.54, "line");
  addpoint((x[9])/2.54, (y[9])/2.54, "xarc_start");
  addpoint((x[23])/2.54, (y[23])/2.54, "xarc_corner");
  addpoint((x[26])/2.54, (y[26])/2.54, "line");
  addpoint((x[25])/2.54, (y[25])/2.54, "xarc_start");
  addpoint((x[24])/2.54, (y[24])/2.54, "xarc_corner");

  group_obj[5] = newobject("poly");
  addpoint((x[1])/2.54, (y[1])/2.54, "line");
  addpoint((x[1])/2.54, (y[6])/2.54, "open");

  group_obj[6] = newobject("POLY");
  addpoint((x[17])/2.54, (y[17])/2.54, "line");
  addpoint((x[17])/2.54, (y[17]+7)/2.54, "line");

  kork=4;

  group_obj[7] = newobject("POLY");
  addpoint((x[14]+nv)/2.54, (y[14]-6-kork-kork)/2.54, "line");
  addpoint((x[14]+nv)/2.54, (y[14]-6)/2.54, "line");
  group_obj[8] = newobject("POLY");
  addpoint((x[14]+ray+nv)/2.54, (y[14]-6-kork-kork)/2.54, "line");
  addpoint((x[14]+ray+nv)/2.54, (y[14]-6)/2.54, "line");

  group_obj[9] = newobject("poly");
  addpoint((x[14])/2.54, (y[14]-6-kork)/2.54, "line");
  addpoint((x[14]+ray+2*nv)/2.54, (y[14]-6-kork)/2.54, "line");

  group_obj[10] = newobject("poly");
  addpoint((x[14])/2.54, (y[14]-6)/2.54, "line");
  addpoint((x[14]+ray+2*nv)/2.54, (y[14]-6)/2.54, "line");
  addpoint((x[14]+ray+2*nv)/2.54, (y[14]-6-kork-kork)/2.54, "line");
  addpoint((x[14])/2.54, (y[14]-6-kork-kork)/2.54, "line");

  /*
    group_obj[9] = newobject("poly");
    addpoint((x[14])/2.54, (y[14]-6)/2.54, "line");
    addpoint((x[14]+ray+2*nv)/2.54, (y[14]-6)/2.54, "line");
    addpoint((x[14]+ray+2*nv)/2.54, (y[14]-6-kork)/2.54, "line");
    addpoint((x[14])/2.54, (y[14]-6-kork)/2.54, "line");
    group_obj[10] = newobject("poly");
    addpoint((x[14])/2.54, (y[14]-6-kork)/2.54, "line");
    addpoint((x[14]+ray+2*nv)/2.54, (y[14]-6-kork)/2.54, "line");
    addpoint((x[14]+ray+2*nv)/2.54, (y[14]-6-kork-kork)/2.54, "line");
    addpoint((x[14])/2.54, (y[14]-6-kork-kork)/2.54, "line");
  */

  kp=kpe+kpt;

  coord(1,160,kay/2+5,5);
  coord(160,161,-kp,0);
  coord(161,162,-nv,0);
  coord(161,163,4,0);
  coord(160,164,0,0.7);
  coord(164,165,-kp/3,0);
  coord(162,166,0,.5);
  coord(166,167,.5,2.5);
  coord(164,168,0,3);
  coord(165,169,0,3);
  coord(167,170,nv+0.2,0);
  coord(168,171,0,1);
  coord(169,172,0,1);
  coord(171,173,0,4);
  coord(169,174,-kp/2,4);
  coord(170,175,-2,6);
  coord(173,176,-kp/4,0);

  group_obj[11] = newobject("poly");
  addpoint(x[164]/2.54,  y[164]/2.54,  "xarc_start");
  addpoint(x[165]/2.54,  y[165]/2.54,  "xarc_corner");
  addpoint(x[163]/2.54,  y[163]/2.54,  "xarc_start");
  addpoint(x[161]/2.54,  y[161]/2.54,  "xarc_corner");
  addpoint(x[166]/2.54,  y[166]/2.54,  "line");
  addpoint(x[167]/2.54,  y[167]/2.54,  "line");
  addpoint(x[170]/2.54,  y[170]/2.54,  "xarc_start");
  addpoint(x[169]/2.54,  y[169]/2.54,  "xarc_corner");
  addpoint(x[168]/2.54,  y[168]/2.54,  "line");

  group_obj[12] = newobject("poly");
  addpoint(x[171]/2.54,  (y[171]+4)/2.54, "xarc_start");
  addpoint(x[172]/2.54,  (y[172]+4)/2.54, "xarc_corner");
  addpoint(x[170]/2.54,  (y[170]+4)/2.54, "LINE");
  addpoint(x[175]/2.54,  (y[175]+4)/2.54, "xarc_start");
  addpoint(x[174]/2.54,  (y[174]+4)/2.54, "xarc_corner");
  addpoint(x[176]/2.54,  (y[176]+4)/2.54, "LINE");
  addpoint(x[173]/2.54,  (y[173]+4)/2.54, "LINE");

  group_obj[13] = newobject("poly");
  addpoint(x[161]/2.54, y[161]/2.54, "line");
  addpoint(x[170]/2.54, y[170]/2.54, "line");

  if (sv != 0)
    {
//cuff boxes
    offset_mark(10);
    select(current_selection,group_obj[7]);
    select(current_selection,group_obj[8]);
    select(current_selection,group_obj[9]);
    group(current_selection);
    deselect(current_selection);

    offset_mark(11);
    select(current_selection,group_obj[13]);
    group(current_selection);
    deselect(current_selection);
    offset_mark(12);
    group(current_selection);
    deselect(current_selection);

//front
    offset_mark(2);
    select(current_selection,group_obj[0]);
    select(current_selection,group_obj[1]);
    group(current_selection);
    deselect(current_selection);

//back
    offset_mark(3);
    group(current_selection);
    deselect(current_selection);

//sleeve
    offset_mark(4);
    select(current_selection,group_obj[5]);
    select(current_selection,group_obj[6]);
    group(current_selection);
    deselect(current_selection);
    }

  else
    {

    mark(10);
    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[10]);
    select(current_selection,group_obj[9]);
    select(current_selection,group_obj[8]);
    select(current_selection,group_obj[7]);
    group(current_selection);
    deselect(current_selection);

    mark(11);
    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[11]);
    select(current_selection,group_obj[13]);
    group(current_selection);
    deselect(current_selection);
    mark(12);
    mark(2);
    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[2]);
    select(current_selection,group_obj[0]);
    select(current_selection,group_obj[1]);
    group(current_selection);
    deselect(current_selection);

    mark(3);

    mark(4);
    current_selection=newselection("OBJECT");
    select(current_selection,group_obj[4]);
    select(current_selection,group_obj[5]);
    select(current_selection,group_obj[6]);
    group(current_selection);
    deselect(current_selection);

    }

  current_selection=newselection("OBJECT");

  for (loop = 0; loop < 20; loop = loop + 1)
    {
    if (marker_array[loop] != 0)
      {
      select(current_selection, marker_array[loop]);
      }
    }

  check_overlap(current_selection);

  if (is_function("origin_arrange")==1)
    {
    origin_arrange(current_selection);
    }

  deselect(current_selection);

  if (is_function("set_marker")==1)
    {
    for (loop = 0; loop < 20; loop = loop + 1)
      {
      if (marker_array[loop] != 0)
        {
        set_marker(marker_array[loop], 0);
        }
      }
    }

  run_command("zoomall");

  }

newobj_dot()
  {
  line("CENTER_LINE");
  current_object = newobject("poly");
  line("SOLID_LINE");
  return current_object;
  }
coord(double orig, double dest, double xxx, double yyy)
  {
  x[dest]=x[orig]+xxx;
  y[dest]=y[orig]+yyy;
  }

center(double one, double two, double result)
  {
  x[result]=(x[one]+x[two])/2;
  y[result]=(y[one]+y[two])/2;
  }

dist(double p1, double p2)
  {
  return distance(x[p1],y[p1],x[p2],y[p2]);
  }

line_intersect(double start1, double end1, double start2, double end2, double dest)
  {
  double tempx;
  double tempy;

  intersect(x[start1],y[start1],x[end1],y[end1],x[start2],y[start2],x[end2],y[end2],0);
  x[dest]=getresultx();
  y[dest]=getresulty();
  }

cont(double cstart, double cend, double cdest, double cvdistanceance)
  {
  double ang;

  ang=angle(x[cstart], y[cstart], x[cend], y[cend]);
  polar(x[cend], y[cend], ang, cvdistanceance);
  x[cdest]=getresultx();
  y[cdest]=getresulty();
  }

right_ang(double start, double end, double to_point, double dest)
  {
  double m,b;

  if (x[start]==x[end])
    {
    x[dest]=x[end];
    y[dest]=y[to_point];
    }

  else
    {
    if (y[start]==y[end])
      {
      x[dest]=x[to_point];
      y[dest]=y[end];
      }

    else
      {
      m=(y[start]-y[end])/(x[start]-x[end]);
      m=-1/m;
      b=y[to_point]-m*x[to_point];
      intersect(x[start],y[start],x[end],y[end],x[to_point],y[to_point],0,b,0);
      x[dest]=getresultx();
      y[dest]=getresulty();
      }
    }
  }

mark(double pass_index)
  {
  group_obj[pass_index]=marker_piece(group_obj[pass_index],1);
  marker_array[marker_count] = group_obj[pass_index];
  marker_count = marker_count + 1;
  }

offset_mark(double pass_index)
  {
  point pnt, test;
  double save_x, save_y;

  current_selection=newselection("OBJECT");
  select(current_selection,group_obj[pass_index]);
  sel_push(current_selection);
  var_push(sv);
  run_command("OFFSET");
  deselect(current_selection);
  current_object=last_obj();

  marker_array[marker_count] = marker_piece(current_object,1);
  current_selection=newselection("OBJECT");
  select(current_selection, marker_array[marker_count]);
  select(current_selection, group_obj[pass_index]);
  marker_count = marker_count + 1;
  }

Forward()
  {
  index = index + 1;

  if (index == 1)
    {
    done = 1;
    }
  }

Backward()
  {
  index = index - 1;
  }

Popup1()
  {
  if (language == 0)
    {
    start_pict_dialog("BUST EASE");
    add_pict_item("Normal (+6.25in/+16cm)","blank.jpg");
    add_pict_item("Minimum (+5.5in/+14cm)","blank.jpg");
    add_pict_item("Maximum (+7in/+18cm)","blank.jpg");
    run_pict("Next");
    ease=get_pict_result();
    Forward();
    }
  }


shift(double orig, double xxx, double yyy)
  {
  x[orig]=x[orig]+xxx;
  y[orig]=y[orig]+yyy;
  }

rect (double x1, double y1, double x2, double y2)
  {
  newobject("poly");
  addpoint( x1/2.54,y1/2.54,"LINE");
  addpoint( x2/2.54,y1/2.54,"LINE");
  addpoint( x2/2.54,y2/2.54,"LINE");
  addpoint( x1/2.54,y2/2.54,"LINE");

  }

dot (double x, double y)
  {
  newobject("poly");
  addpoint( x/2.54,y/2.54,"LINE");
  }

line (double x3, double y3, double x4, double y4)
  {
  newobject("poly");
  addpoint( x3/2.54,y3/2.54,"LINE");
  addpoint( x4/2.54,y4/2.54,"LINE");

  }

rotate(double rpoint,double rcenter, double rangle)
  {
  double vdistance, vang;

  vdistance=dist(rpoint, rcenter);
  vang=angle(x[rcenter],y[rcenter],x[rpoint],y[rpoint]);
  polar(x[rcenter],y[rcenter],vang+rangle,vdistance);
  x[rpoint]=getresultx();
  y[rpoint]=getresulty();
  }

linecirc(double PA,double  PB,double  PC,double  dradius,double  which, double PD)
  {
  double  mslope, dist0, dist1, dist2, xtemp;
  double tx, ty;
  xtemp = (x[PB]-x[PC])*(x[PB]-x[PC]);

  if (xtemp > 0)
    {
    xtemp = (y[PB]-y[PC])*(y[PB]-y[PC]);

    if ( xtemp > 0)
      {
      mslope = (y[PC] - y[PB])/(x[PC] - x[PB]);
      tx = x[PA] + 1;
      ty = y[PA] - 1/mslope;
      intersect(x[PA], y[PA], tx, ty, x[PB], y[PB], x[PC], y[PC], 0);
      tx = getresultx();
      ty = getresulty();
      dist1 = distance(x[PA], y[PA], tx, ty);
      dist2 = interceptline(0, dist1, dradius);
      dist0 = sqrt(1+mslope*mslope);
      xtemp = dist2/dist0;

      if (which)
        {
        x[PD] = tx+xtemp;
        y[PD] = ty+ xtemp*mslope;
        }

      else
        {
        x[PD] =  tx-xtemp;
        y[PD] = ty- xtemp*mslope;
        }
      }

    else
      {
      x[PD] = x[PB];

      if (which)
        {
        y[PD] = y[PA] + interceptline(x[PA], x[PB], dradius);
        }

      else
        {
        y[PD] = y[PA] - interceptline(x[PA], x[PB], dradius);
        }
      }
    }

  else
    {
    y[PD] = y[PB];

    if (which)
      {
      x[PD] = x[PA] + interceptline(y[PA], y[PB], dradius);
      }

    else
      {
      x[PD] = x[PA] - interceptline(y[PA], y[PB], dradius);
      }
    }
  }

double xar[13], yar[13];
double save_rx, save_ry;

arclength(double start, double corner, double end)
  {

  double ct, last_x, last_y;
  double a_dist;

  last_x = x[start];
  last_y = y[start];

  a_dist=0;

  for (ct=1; ct < 12; ct = ct + 1)
    {
    fts(start, corner, end, ct);
    a_dist = a_dist + distance(save_rx, save_ry, last_x, last_y);
    last_x=save_rx;
    last_y=save_ry;
    }

  return a_dist;
  }

double A1, A2, B1, B2;
double sx, sy, cx, cy, ex, ey;

double t0[2], t1[2];
double ftc[2];
fts(double start, double corner, double end, double pos)
  {
  if (pos<1)
    {
    save_rx=x[start];
    save_ry=y[start];
    }

  else
    {
    if (pos<2)
      {
      sx = x[start];
      sy = y[start];
      cx = x[corner];
      cy = y[corner];
      ex = x[end];
      ey = y[end];

      A1=cx - sx;
      A2=cy - sy;
      B1=cx - ex;
      B2=cy - ey;

      A1=-A1;
      B1=-B1;
      A2=-A2;
      B2=-B2;

      t0[0]=A1;
      t0[1]=B1;
      t1[0]=A2;
      t1[1]=B2;

      ftc[0]= cx + (t0[0] + t0[1]);
      ftc[1]= cy + (t1[0] + t1[1]);

      save_rx = t0[0]*(xar[pos])+t0[1]*(yar[pos])+ ftc[0];
      save_ry = t1[0]*(xar[pos])+t1[1]*(yar[pos])+ ftc[1];
      }

    else
      {
      if (pos>10)
        {
        save_rx=x[end];
        save_ry=y[end];
        }

      else
        {
        save_rx = t0[0]*(xar[pos])+t0[1]*(yar[pos])+ ftc[0];
        save_ry = t1[0]*(xar[pos])+t1[1]*(yar[pos])+ ftc[1];
        }
      }
    }
  }

init_xarc_array()
  {

  double ang_start, ang_end, step, theta, ct;
  double XARC_PIECES;
  XARC_PIECES = 12;

  ang_start = -3.14159/2;
  ang_end= -3.14159;

  ct=0;

  step= (ang_end - ang_start)/(XARC_PIECES-1);

  for (theta=ang_start; ct < XARC_PIECES; theta = theta + step)
    {
    xar[ct] = cos(theta);
    yar[ct] = sin(theta);
    ct=ct+1;
    }

  }

max(double aa, double bb)
  {
  if (aa > bb)
    {
    return aa;
    }

  else
    {
    return bb;
    }
  }

min(double aa, double bb)
  {
  if (aa < bb)
    {
    return aa;
    }

  else
    {
    return bb;
    }
  }




// End