double lang, index, done, offset_value, marker_count;
  double Flow[3];
  double x[440],y[440];
  double metric;
  object Obj[85];
  double HideObj[85];
  selection current_selection;
  point current_point;
  object current_object;
  object Mrk[85];
  double temp;
  double do_counter, do_max, do_logic;
  double Var[68];
  double Table[22];


initDefs()
  {
  ;
  }

initCode()
  {
  ;
  }

main()
  {
  double read;
  initDefs();
  initCode();
  init_xarc_array();
  lang = get_language();
  metric  = unit_mode();
  if ( (lang != 0) && ( (lang != 1) && ( (lang != 2) && ( (lang != 3) && ( (lang != 4) && ( (lang != 5) && ( (lang != 6))))))))
    {
    lang=0;
    }
  check_reg(0,"Ginani Patterns","empireline crossoverdress","This macro needs to be properly installed before running.");
  metric = unit_mode();
  while (!done)
    {
    if (index == 0)
      {
      Popup0();
      }
    if (index == 1)
      {
      Popup1();
      }
    if (index == 2)
      {
      Popup2();
      }
    if (index == 3)
      {
      Popup3();
      }
    if (index == 4)
      {
      Popup4();
      }
    if (index == 5)
      {
      Popup5();
      }
    if (index == 6)
      {
      Popup6();
      }
    if (index == 7)
      {
      Popup7();
      }
    if (index == 8)
      {
      Popup8();
      }
    if (index == 9)
      {
      Popup9();
      }
    if (index == 10)
      {
      Popup10();
      }
    if (index == 11)
      {
      Popup11();
      }
    }

  if (measure_table("GINANI FEMALE")==1)
    {
    read = 1;
    }
  else
    {
    read = 0;
    }

  if (read==0)
    {
    ;
    Var[0] = CheckToMetric(36);
    Var[1] = CheckToMetric(7.5);
    Var[2] = CheckToMetric(3.125);
    Var[3] = CheckToMetric(10.625);
    Var[4] = CheckToMetric(17);
    Var[5] = CheckToMetric(14);
    Var[6] = CheckToMetric(14.5);
    Var[7] = CheckToMetric(15.5);
    Var[8] = CheckToMetric(14.875);
    Var[9] = CheckToMetric(15.875);
    Var[12] = CheckToMetric(23.5);
    Var[13] = CheckToMetric(24);
    Var[14] = CheckToMetric(43);
    Var[15] = CheckToMetric(42.5);
    Var[16] = CheckToMetric(43.5);
    Var[18] = CheckToMetric(28);
    Var[19] = CheckToMetric(40);
  if (lang == 0)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust", Var[0], "chest");
      add_picture_input("Bust Span", Var[1], "xchest");
      add_picture_input("Bust Radius", Var[2], "Bust radius");
      add_picture_input("Bust Point", Var[3], "Bustpoint");
      add_picture_input("Full Front Length", Var[4], "fullfrontlength");
      add_picture_input("Across Chest", Var[5], "acrosschest");
      add_picture_input("Across Back", Var[6], "xback");
      add_picture_input("Nape to Waist", Var[7], "Back length");
      add_picture_input("Front Shoulder", Var[8], "FrontShoulder");
      add_picture_input("Back Shoulder", Var[9], "Backshoulder");
      add_picture_input("Full Sleeve length", Var[12], "Sleeve");
      add_picture_input("Side waist to knee", Var[13], "sidewaisttoknee");
      add_picture_input("Side waist to floor", Var[14], "sidewaisttofloor");
      add_picture_input("Center front waist to floor", Var[15], "CFwaisttofloor");
      add_picture_input("Center Back to floor", Var[16], "cbwaisttofloor");
      add_picture_input("Waist", Var[18], "WAIST");
      add_picture_input("Hip", Var[19], "Hip");
      run_picture_input();
    }
  if (lang == 1)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust", Var[0], "chest");
      add_picture_input("Bust Span", Var[1], "xchest");
      add_picture_input("Bust Radius", Var[2], "Bust radius");
      add_picture_input("Bust Point", Var[3], "Bustpoint");
      add_picture_input("Full Front Length", Var[4], "fullfrontlength");
      add_picture_input("Across Chest", Var[5], "acrosschest");
      add_picture_input("Across Back", Var[6], "xback");
      add_picture_input("Nape to Waist", Var[7], "Back length");
      add_picture_input("Front Shoulder", Var[8], "FrontShoulder");
      add_picture_input("Back Shoulder", Var[9], "Backshoulder");
      add_picture_input("Full Sleeve length", Var[12], "Sleeve");
      add_picture_input("Side waist to knee", Var[13], "sidewaisttoknee");
      add_picture_input("Side waist to floor", Var[14], "sidewaisttofloor");
      add_picture_input("Center front waist to floor", Var[15], "CFwaisttofloor");
      add_picture_input("Center Back to floor", Var[16], "cbwaisttofloor");
      add_picture_input("Waist", Var[18], "WAIST");
      add_picture_input("Hip", Var[19], "Hip");
      run_picture_input();
    }
  if (lang == 2)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust", Var[0], "chest");
      add_picture_input("Bust Span", Var[1], "xchest");
      add_picture_input("Bust Radius", Var[2], "Bust radius");
      add_picture_input("Bust Point", Var[3], "Bustpoint");
      add_picture_input("Full Front Length", Var[4], "fullfrontlength");
      add_picture_input("Across Chest", Var[5], "acrosschest");
      add_picture_input("Across Back", Var[6], "xback");
      add_picture_input("Nape to Waist", Var[7], "Back length");
      add_picture_input("Front Shoulder", Var[8], "FrontShoulder");
      add_picture_input("Back Shoulder", Var[9], "Backshoulder");
      add_picture_input("Full Sleeve length", Var[12], "Sleeve");
      add_picture_input("Side waist to knee", Var[13], "sidewaisttoknee");
      add_picture_input("Side waist to floor", Var[14], "sidewaisttofloor");
      add_picture_input("Center front waist to floor", Var[15], "CFwaisttofloor");
      add_picture_input("Center Back to floor", Var[16], "cbwaisttofloor");
      add_picture_input("Waist", Var[18], "WAIST");
      add_picture_input("Hip", Var[19], "Hip");
      run_picture_input();
    }
  if (lang == 3)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust", Var[0], "chest");
      add_picture_input("Bust Span", Var[1], "xchest");
      add_picture_input("Bust Radius", Var[2], "Bust radius");
      add_picture_input("Bust Point", Var[3], "Bustpoint");
      add_picture_input("Full Front Length", Var[4], "fullfrontlength");
      add_picture_input("Across Chest", Var[5], "acrosschest");
      add_picture_input("Across Back", Var[6], "xback");
      add_picture_input("Nape to Waist", Var[7], "Back length");
      add_picture_input("Front Shoulder", Var[8], "FrontShoulder");
      add_picture_input("Back Shoulder", Var[9], "Backshoulder");
      add_picture_input("Full Sleeve length", Var[12], "Sleeve");
      add_picture_input("Side waist to knee", Var[13], "sidewaisttoknee");
      add_picture_input("Side waist to floor", Var[14], "sidewaisttofloor");
      add_picture_input("Center front waist to floor", Var[15], "CFwaisttofloor");
      add_picture_input("Center Back to floor", Var[16], "cbwaisttofloor");
      add_picture_input("Waist", Var[18], "WAIST");
      add_picture_input("Hip", Var[19], "Hip");
      run_picture_input();
    }
  if (lang == 4)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust", Var[0], "chest");
      add_picture_input("Bust Span", Var[1], "xchest");
      add_picture_input("Bust Radius", Var[2], "Bust radius");
      add_picture_input("Bust Point", Var[3], "Bustpoint");
      add_picture_input("Full Front Length", Var[4], "fullfrontlength");
      add_picture_input("Across Chest", Var[5], "acrosschest");
      add_picture_input("Across Back", Var[6], "xback");
      add_picture_input("Nape to Waist", Var[7], "Back length");
      add_picture_input("Front Shoulder", Var[8], "FrontShoulder");
      add_picture_input("Back Shoulder", Var[9], "Backshoulder");
      add_picture_input("Full Sleeve length", Var[12], "Sleeve");
      add_picture_input("Side waist to knee", Var[13], "sidewaisttoknee");
      add_picture_input("Side waist to floor", Var[14], "sidewaisttofloor");
      add_picture_input("Center front waist to floor", Var[15], "CFwaisttofloor");
      add_picture_input("Center Back to floor", Var[16], "cbwaisttofloor");
      add_picture_input("Waist", Var[18], "WAIST");
      add_picture_input("Hip", Var[19], "Hip");
      run_picture_input();
    }
  if (lang == 5)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust", Var[0], "chest");
      add_picture_input("Bust Span", Var[1], "xchest");
      add_picture_input("Bust Radius", Var[2], "Bust radius");
      add_picture_input("Bust Point", Var[3], "Bustpoint");
      add_picture_input("Full Front Length", Var[4], "fullfrontlength");
      add_picture_input("Across Chest", Var[5], "acrosschest");
      add_picture_input("Across Back", Var[6], "xback");
      add_picture_input("Nape to Waist", Var[7], "Back length");
      add_picture_input("Front Shoulder", Var[8], "FrontShoulder");
      add_picture_input("Back Shoulder", Var[9], "Backshoulder");
      add_picture_input("Full Sleeve length", Var[12], "Sleeve");
      add_picture_input("Side waist to knee", Var[13], "sidewaisttoknee");
      add_picture_input("Side waist to floor", Var[14], "sidewaisttofloor");
      add_picture_input("Center front waist to floor", Var[15], "CFwaisttofloor");
      add_picture_input("Center Back to floor", Var[16], "cbwaisttofloor");
      add_picture_input("Waist", Var[18], "WAIST");
      add_picture_input("Hip", Var[19], "Hip");
      run_picture_input();
    }
  if (lang == 6)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust", Var[0], "chest");
      add_picture_input("Bust Span", Var[1], "xchest");
      add_picture_input("Bust Radius", Var[2], "Bust radius");
      add_picture_input("Bust Point", Var[3], "Bustpoint");
      add_picture_input("Full Front Length", Var[4], "fullfrontlength");
      add_picture_input("Across Chest", Var[5], "acrosschest");
      add_picture_input("Across Back", Var[6], "xback");
      add_picture_input("Nape to Waist", Var[7], "Back length");
      add_picture_input("Front Shoulder", Var[8], "FrontShoulder");
      add_picture_input("Back Shoulder", Var[9], "Backshoulder");
      add_picture_input("Full Sleeve length", Var[12], "Sleeve");
      add_picture_input("Side waist to knee", Var[13], "sidewaisttoknee");
      add_picture_input("Side waist to floor", Var[14], "sidewaisttofloor");
      add_picture_input("Center front waist to floor", Var[15], "CFwaisttofloor");
      add_picture_input("Center Back to floor", Var[16], "cbwaisttofloor");
      add_picture_input("Waist", Var[18], "WAIST");
      add_picture_input("Hip", Var[19], "Hip");
      run_picture_input();
    }
    Var[0]= CheckFromMetric(Var[0]);
    Var[1]= CheckFromMetric(Var[1]);
    Var[2]= CheckFromMetric(Var[2]);
    Var[3]= CheckFromMetric(Var[3]);
    Var[4]= CheckFromMetric(Var[4]);
    Var[5]= CheckFromMetric(Var[5]);
    Var[6]= CheckFromMetric(Var[6]);
    Var[7]= CheckFromMetric(Var[7]);
    Var[8]= CheckFromMetric(Var[8]);
    Var[9]= CheckFromMetric(Var[9]);
    Var[12]= CheckFromMetric(Var[12]);
    Var[13]= CheckFromMetric(Var[13]);
    Var[14]= CheckFromMetric(Var[14]);
    Var[15]= CheckFromMetric(Var[15]);
    Var[16]= CheckFromMetric(Var[16]);
    Var[18]= CheckFromMetric(Var[18]);
    Var[19]= CheckFromMetric(Var[19]);
    }
  else
    {
    ;
    if (metric==1)
      {
       Var[0] = Table[0]/2.54;
       Var[1] = Table[1]/2.54;
       Var[2] = Table[2]/2.54;
       Var[3] = Table[3]/2.54;
       Var[4] = Table[4]/2.54;
       Var[5] = Table[5]/2.54;
       Var[6] = Table[6]/2.54;
       Var[7] = Table[7]/2.54;
       Var[8] = Table[8]/2.54;
       Var[9] = Table[9]/2.54;
       Var[10] = Table[10]/2.54;
       Var[11] = Table[11]/2.54;
       Var[12] = Table[12]/2.54;
       Var[13] = Table[13]/2.54;
       Var[14] = Table[14]/2.54;
       Var[15] = Table[15]/2.54;
       Var[16] = Table[16]/2.54;
       Var[17] = Table[17]/2.54;
       Var[18] = Table[18]/2.54;
       Var[19] = Table[19]/2.54;
       Var[50] = Table[20]/2.54;
       Var[51] = Table[21]/2.54;
      }
     else
      {
      Var[0] = Table[0];
      Var[1] = Table[1];
      Var[2] = Table[2];
      Var[3] = Table[3];
      Var[4] = Table[4];
      Var[5] = Table[5];
      Var[6] = Table[6];
      Var[7] = Table[7];
      Var[8] = Table[8];
      Var[9] = Table[9];
      Var[10] = Table[10];
      Var[11] = Table[11];
      Var[12] = Table[12];
      Var[13] = Table[13];
      Var[14] = Table[14];
      Var[15] = Table[15];
      Var[16] = Table[16];
      Var[17] = Table[17];
      Var[18] = Table[18];
      Var[19] = Table[19];
      Var[50] = Table[20];
      Var[51] = Table[21];
      }
    }

    Var[20] = CheckToMetric(3);
    Var[21] = CheckToMetric(2);
    Var[22] = CheckToMetric(2);
    Var[24] = CheckToMetric(24);
    Var[52] = CheckToMetric(0.5);
  if (lang == 0)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust ease", Var[20], "");
      add_picture_input("Waist ease", Var[21], "");
      add_picture_input("Hip ease", Var[22], "");
      add_picture_input("Dress length from waist", Var[24], "");
      add_picture_input("Seam Allowance", Var[52], "");
      run_picture_input();
    }
  if (lang == 1)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust ease", Var[20], "");
      add_picture_input("Waist ease", Var[21], "");
      add_picture_input("Hip ease", Var[22], "");
      add_picture_input("Dress length from waist", Var[24], "");
      add_picture_input("Seam Allowance", Var[52], "");
      run_picture_input();
    }
  if (lang == 2)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust ease", Var[20], "");
      add_picture_input("Waist ease", Var[21], "");
      add_picture_input("Hip ease", Var[22], "");
      add_picture_input("Dress length from waist", Var[24], "");
      add_picture_input("Seam Allowance", Var[52], "");
      run_picture_input();
    }
  if (lang == 3)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust ease", Var[20], "");
      add_picture_input("Waist ease", Var[21], "");
      add_picture_input("Hip ease", Var[22], "");
      add_picture_input("Dress length from waist", Var[24], "");
      add_picture_input("Seam Allowance", Var[52], "");
      run_picture_input();
    }
  if (lang == 4)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust ease", Var[20], "");
      add_picture_input("Waist ease", Var[21], "");
      add_picture_input("Hip ease", Var[22], "");
      add_picture_input("Dress length from waist", Var[24], "");
      add_picture_input("Seam Allowance", Var[52], "");
      run_picture_input();
    }
  if (lang == 5)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust ease", Var[20], "");
      add_picture_input("Waist ease", Var[21], "");
      add_picture_input("Hip ease", Var[22], "");
      add_picture_input("Dress length from waist", Var[24], "");
      add_picture_input("Seam Allowance", Var[52], "");
      run_picture_input();
    }
  if (lang == 6)
    {
      start_picture_input("Empire Cross over Dress1");
      add_picture_input("Bust ease", Var[20], "");
      add_picture_input("Waist ease", Var[21], "");
      add_picture_input("Hip ease", Var[22], "");
      add_picture_input("Dress length from waist", Var[24], "");
      add_picture_input("Seam Allowance", Var[52], "");
      run_picture_input();
    }
    Var[20]= CheckFromMetric(Var[20]);
    Var[21]= CheckFromMetric(Var[21]);
    Var[22]= CheckFromMetric(Var[22]);
    Var[24]= CheckFromMetric(Var[24]);
    Var[52]= CheckFromMetric(Var[52]);
  if (Flow[0] == 0)
    {
    Flow0View0();
    }
    if (Flow[0] == 1)
    {
    Flow0View1();
    }
    if (Flow[0] == 2)
    {
    Flow0View2();
    }
    if (Flow[0] == 3)
    {
    Flow0View3();
    }
    if (Flow[0] == 4)
    {
    Flow0View4();
    }
    if (Flow[0] == 5)
    {
    Flow0View5();
    }
    if (Flow[0] == 6)
    {
    Flow0View6();
    }
    if (Flow[0] == 7)
    {
    Flow0View7();
    }
    if (Flow[0] == 8)
    {
    Flow0View8();
    }
    if (Flow[0] == 9)
    {
    Flow0View9();
    }
    if (Flow[1] == 0)
    {
    Flow1View0();
    }
    if (Flow[1] == 1)
    {
    Flow1View1();
    }
    if (Flow[1] == 2)
    {
    Flow1View2();
    }
    if (Flow[1] == 3)
    {
    Flow1View3();
    }
    if (Flow[2] == 0)
    {
    Flow2View0();
    }
    if (Flow[2] == 1)
    {
    Flow2View1();
    }
    if (Flow[2] == 2)
    {
    Flow2View2();
    }
    if (Flow[2] == 3)
    {
    Flow2View3();
    }
    if (Flow[2] == 4)
    {
    Flow2View4();
    }
    if (Flow[2] == 5)
    {
    Flow2View5();
    }
    if (Flow[0] == 0)
    {
    Flow0View0Objects();
    }
    if (Flow[0] == 1)
    {
    Flow0View1Objects();
    }
    if (Flow[0] == 2)
    {
    Flow0View2Objects();
    }
    if (Flow[0] == 3)
    {
    Flow0View3Objects();
    }
    if (Flow[0] == 4)
    {
    Flow0View4Objects();
    }
    if (Flow[0] == 5)
    {
    Flow0View5Objects();
    }
    if (Flow[0] == 6)
    {
    Flow0View6Objects();
    }
    if (Flow[0] == 7)
    {
    Flow0View7Objects();
    }
    if (Flow[0] == 8)
    {
    Flow0View8Objects();
    }
    if (Flow[0] == 9)
    {
    Flow0View9Objects();
    }
    if (Flow[1] == 0)
    {
    Flow1View0Objects();
    }
    if (Flow[1] == 1)
    {
    Flow1View1Objects();
    }
    if (Flow[1] == 2)
    {
    Flow1View2Objects();
    }
    if (Flow[1] == 3)
    {
    Flow1View3Objects();
    }
    if (Flow[2] == 0)
    {
    Flow2View0Objects();
    }
    if (Flow[2] == 1)
    {
    Flow2View1Objects();
    }
    if (Flow[2] == 2)
    {
    Flow2View2Objects();
    }
    if (Flow[2] == 3)
    {
    Flow2View3Objects();
    }
    if (Flow[2] == 4)
    {
    Flow2View4Objects();
    }
    if (Flow[2] == 5)
    {
    Flow2View5Objects();
    }
  
  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[16] != 0)  { current_object = Obj[16]; select(current_selection, current_object); } 
  if (Obj[15] != 0)  { current_object = Obj[15]; select(current_selection, current_object); } 
  if (Obj[11] != 0)  { current_object = Obj[11]; select(current_selection, current_object); } 
  if (Obj[7] != 0)  { current_object = Obj[7]; select(current_selection, current_object); } 
  if (Obj[6] != 0)  { current_object = Obj[6]; select(current_selection, current_object); } 
  if (Obj[5] != 0)  { current_object = Obj[5]; select(current_selection, current_object); } 
  if (Obj[1] != 0)  { current_object = Obj[1]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"Grback"); }
    if (lang == 1) { name_group(current_object,"Grback"); }
    if (lang == 2) { name_group(current_object,"Grback"); }
    if (lang == 3) { name_group(current_object,"Grback"); }
    if (lang == 4) { name_group(current_object,"Grback"); }
    if (lang == 5) { name_group(current_object,"Grback"); }
    if (lang == 6) { name_group(current_object,"Grback"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[51] != 0)  { current_object = Obj[51]; select(current_selection, current_object); } 
  if (Obj[50] != 0)  { current_object = Obj[50]; select(current_selection, current_object); } 
  if (Obj[49] != 0)  { current_object = Obj[49]; select(current_selection, current_object); } 
  if (Obj[48] != 0)  { current_object = Obj[48]; select(current_selection, current_object); } 
  if (Obj[47] != 0)  { current_object = Obj[47]; select(current_selection, current_object); } 
  if (Obj[46] != 0)  { current_object = Obj[46]; select(current_selection, current_object); } 
  if (Obj[24] != 0)  { current_object = Obj[24]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"grbackband"); }
    if (lang == 1) { name_group(current_object,"grbackband"); }
    if (lang == 2) { name_group(current_object,"grbackband"); }
    if (lang == 3) { name_group(current_object,"grbackband"); }
    if (lang == 4) { name_group(current_object,"grbackband"); }
    if (lang == 5) { name_group(current_object,"grbackband"); }
    if (lang == 6) { name_group(current_object,"grbackband"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[76] != 0)  { current_object = Obj[76]; select(current_selection, current_object); } 
  if (Obj[72] != 0)  { current_object = Obj[72]; select(current_selection, current_object); } 
  if (Obj[61] != 0)  { current_object = Obj[61]; select(current_selection, current_object); } 
  if (Obj[60] != 0)  { current_object = Obj[60]; select(current_selection, current_object); } 
  if (Obj[59] != 0)  { current_object = Obj[59]; select(current_selection, current_object); } 
  if (Obj[58] != 0)  { current_object = Obj[58]; select(current_selection, current_object); } 
  if (Obj[57] != 0)  { current_object = Obj[57]; select(current_selection, current_object); } 
  if (Obj[56] != 0)  { current_object = Obj[56]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"grCenterBackPanel"); }
    if (lang == 1) { name_group(current_object,"grCenterBackPanel"); }
    if (lang == 2) { name_group(current_object,"grCenterBackPanel"); }
    if (lang == 3) { name_group(current_object,"grCenterBackPanel"); }
    if (lang == 4) { name_group(current_object,"grCenterBackPanel"); }
    if (lang == 5) { name_group(current_object,"grCenterBackPanel"); }
    if (lang == 6) { name_group(current_object,"grCenterBackPanel"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[79] != 0)  { current_object = Obj[79]; select(current_selection, current_object); } 
  if (Obj[75] != 0)  { current_object = Obj[75]; select(current_selection, current_object); } 
  if (Obj[71] != 0)  { current_object = Obj[71]; select(current_selection, current_object); } 
  if (Obj[70] != 0)  { current_object = Obj[70]; select(current_selection, current_object); } 
  if (Obj[69] != 0)  { current_object = Obj[69]; select(current_selection, current_object); } 
  if (Obj[68] != 0)  { current_object = Obj[68]; select(current_selection, current_object); } 
  if (Obj[53] != 0)  { current_object = Obj[53]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"grCenterFrontPanel"); }
    if (lang == 1) { name_group(current_object,"grCenterFrontPanel"); }
    if (lang == 2) { name_group(current_object,"grCenterFrontPanel"); }
    if (lang == 3) { name_group(current_object,"grCenterFrontPanel"); }
    if (lang == 4) { name_group(current_object,"grCenterFrontPanel"); }
    if (lang == 5) { name_group(current_object,"grCenterFrontPanel"); }
    if (lang == 6) { name_group(current_object,"grCenterFrontPanel"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[35] != 0)  { current_object = Obj[35]; select(current_selection, current_object); } 
  if (Obj[34] != 0)  { current_object = Obj[34]; select(current_selection, current_object); } 
  if (Obj[33] != 0)  { current_object = Obj[33]; select(current_selection, current_object); } 
  if (Obj[32] != 0)  { current_object = Obj[32]; select(current_selection, current_object); } 
  if (Obj[31] != 0)  { current_object = Obj[31]; select(current_selection, current_object); } 
  if (Obj[30] != 0)  { current_object = Obj[30]; select(current_selection, current_object); } 
  if (Obj[14] != 0)  { current_object = Obj[14]; select(current_selection, current_object); } 
  if (Obj[13] != 0)  { current_object = Obj[13]; select(current_selection, current_object); } 
  if (Obj[4] != 0)  { current_object = Obj[4]; select(current_selection, current_object); } 
  if (Obj[3] != 0)  { current_object = Obj[3]; select(current_selection, current_object); } 
  if (Obj[0] != 0)  { current_object = Obj[0]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"GrFront"); }
    if (lang == 1) { name_group(current_object,"GrFront"); }
    if (lang == 2) { name_group(current_object,"GrFront"); }
    if (lang == 3) { name_group(current_object,"GrFront"); }
    if (lang == 4) { name_group(current_object,"GrFront"); }
    if (lang == 5) { name_group(current_object,"GrFront"); }
    if (lang == 6) { name_group(current_object,"GrFront"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[45] != 0)  { current_object = Obj[45]; select(current_selection, current_object); } 
  if (Obj[44] != 0)  { current_object = Obj[44]; select(current_selection, current_object); } 
  if (Obj[43] != 0)  { current_object = Obj[43]; select(current_selection, current_object); } 
  if (Obj[42] != 0)  { current_object = Obj[42]; select(current_selection, current_object); } 
  if (Obj[41] != 0)  { current_object = Obj[41]; select(current_selection, current_object); } 
  if (Obj[25] != 0)  { current_object = Obj[25]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"grfrontband"); }
    if (lang == 1) { name_group(current_object,"grfrontband"); }
    if (lang == 2) { name_group(current_object,"grfrontband"); }
    if (lang == 3) { name_group(current_object,"grfrontband"); }
    if (lang == 4) { name_group(current_object,"grfrontband"); }
    if (lang == 5) { name_group(current_object,"grfrontband"); }
    if (lang == 6) { name_group(current_object,"grfrontband"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[40] != 0)  { current_object = Obj[40]; select(current_selection, current_object); } 
  if (Obj[23] != 0)  { current_object = Obj[23]; select(current_selection, current_object); } 
  if (Obj[20] != 0)  { current_object = Obj[20]; select(current_selection, current_object); } 
  if (Obj[19] != 0)  { current_object = Obj[19]; select(current_selection, current_object); } 
  if (Obj[18] != 0)  { current_object = Obj[18]; select(current_selection, current_object); } 
  if (Obj[12] != 0)  { current_object = Obj[12]; select(current_selection, current_object); } 
  if (Obj[9] != 0)  { current_object = Obj[9]; select(current_selection, current_object); } 
  if (Obj[2] != 0)  { current_object = Obj[2]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"grlowerback"); }
    if (lang == 1) { name_group(current_object,"grlowerback"); }
    if (lang == 2) { name_group(current_object,"grlowerback"); }
    if (lang == 3) { name_group(current_object,"grlowerback"); }
    if (lang == 4) { name_group(current_object,"grlowerback"); }
    if (lang == 5) { name_group(current_object,"grlowerback"); }
    if (lang == 6) { name_group(current_object,"grlowerback"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[52] != 0)  { current_object = Obj[52]; select(current_selection, current_object); } 
  if (Obj[39] != 0)  { current_object = Obj[39]; select(current_selection, current_object); } 
  if (Obj[38] != 0)  { current_object = Obj[38]; select(current_selection, current_object); } 
  if (Obj[22] != 0)  { current_object = Obj[22]; select(current_selection, current_object); } 
  if (Obj[21] != 0)  { current_object = Obj[21]; select(current_selection, current_object); } 
  if (Obj[17] != 0)  { current_object = Obj[17]; select(current_selection, current_object); } 
  if (Obj[10] != 0)  { current_object = Obj[10]; select(current_selection, current_object); } 
  if (Obj[8] != 0)  { current_object = Obj[8]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"grlowerfront"); }
    if (lang == 1) { name_group(current_object,"grlowerfront"); }
    if (lang == 2) { name_group(current_object,"grlowerfront"); }
    if (lang == 3) { name_group(current_object,"grlowerfront"); }
    if (lang == 4) { name_group(current_object,"grlowerfront"); }
    if (lang == 5) { name_group(current_object,"grlowerfront"); }
    if (lang == 6) { name_group(current_object,"grlowerfront"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[77] != 0)  { current_object = Obj[77]; select(current_selection, current_object); } 
  if (Obj[73] != 0)  { current_object = Obj[73]; select(current_selection, current_object); } 
  if (Obj[64] != 0)  { current_object = Obj[64]; select(current_selection, current_object); } 
  if (Obj[63] != 0)  { current_object = Obj[63]; select(current_selection, current_object); } 
  if (Obj[62] != 0)  { current_object = Obj[62]; select(current_selection, current_object); } 
  if (Obj[55] != 0)  { current_object = Obj[55]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"grSideBackPanel"); }
    if (lang == 1) { name_group(current_object,"grSideBackPanel"); }
    if (lang == 2) { name_group(current_object,"grSideBackPanel"); }
    if (lang == 3) { name_group(current_object,"grSideBackPanel"); }
    if (lang == 4) { name_group(current_object,"grSideBackPanel"); }
    if (lang == 5) { name_group(current_object,"grSideBackPanel"); }
    if (lang == 6) { name_group(current_object,"grSideBackPanel"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[78] != 0)  { current_object = Obj[78]; select(current_selection, current_object); } 
  if (Obj[74] != 0)  { current_object = Obj[74]; select(current_selection, current_object); } 
  if (Obj[67] != 0)  { current_object = Obj[67]; select(current_selection, current_object); } 
  if (Obj[66] != 0)  { current_object = Obj[66]; select(current_selection, current_object); } 
  if (Obj[65] != 0)  { current_object = Obj[65]; select(current_selection, current_object); } 
  if (Obj[54] != 0)  { current_object = Obj[54]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"grSideFrontPanel"); }
    if (lang == 1) { name_group(current_object,"grSideFrontPanel"); }
    if (lang == 2) { name_group(current_object,"grSideFrontPanel"); }
    if (lang == 3) { name_group(current_object,"grSideFrontPanel"); }
    if (lang == 4) { name_group(current_object,"grSideFrontPanel"); }
    if (lang == 5) { name_group(current_object,"grSideFrontPanel"); }
    if (lang == 6) { name_group(current_object,"grSideFrontPanel"); }
    }

  current_object=0;

  current_selection=newselection("OBJECT");
  if (Obj[84] != 0)  { current_object = Obj[84]; select(current_selection, current_object); } 
  if (Obj[83] != 0)  { current_object = Obj[83]; select(current_selection, current_object); } 
  if (Obj[82] != 0)  { current_object = Obj[82]; select(current_selection, current_object); } 
  if (Obj[81] != 0)  { current_object = Obj[81]; select(current_selection, current_object); } 
  if (Obj[80] != 0)  { current_object = Obj[80]; select(current_selection, current_object); } 
  group(current_selection);
  deselect(current_selection);
  if (current_object != 0)
    {
    if (lang == 0) { name_group(current_object,"GrSleeve"); }
    if (lang == 1) { name_group(current_object,"GrSleeve"); }
    if (lang == 2) { name_group(current_object,"GrSleeve"); }
    if (lang == 3) { name_group(current_object,"GrSleeve"); }
    if (lang == 4) { name_group(current_object,"GrSleeve"); }
    if (lang == 5) { name_group(current_object,"GrSleeve"); }
    if (lang == 6) { name_group(current_object,"GrSleeve"); }
    }

  current_selection=newselection("OBJECT");
  for (temp=0; temp < 85; temp=temp+1)
    {
    if (Mrk[temp] != 0)
      {
       select(current_selection, Mrk[temp]);
      }
    }
  check_overlap(current_selection);
  deselect(current_selection);

  run_command("ZOOMALL");
  }

Popup0()
{
  if (lang == 0)
    {
    start_pict_dialog("Front");
    add_pict_item("Empire Dress","");
    add_pict_item("Empire Dress with Band","");
    run_pict("Next");
    Flow[0] = get_pict_result();
    Forward();
    }
  if (lang == 1)
    {
    start_pict_dialog("Front");
    add_pict_item("Empire Dress","");
    add_pict_item("Empire Dress with Band","");
    run_pict("Next");
    Flow[0] = get_pict_result();
    Forward();
    }
  if (lang == 2)
    {
    start_pict_dialog("Front");
    add_pict_item("Empire Dress","");
    add_pict_item("Empire Dress with Band","");
    run_pict("Next");
    Flow[0] = get_pict_result();
    Forward();
    }
  if (lang == 3)
    {
    start_pict_dialog("Front");
    add_pict_item("Empire Dress","");
    add_pict_item("Empire Dress with Band","");
    run_pict("Next");
    Flow[0] = get_pict_result();
    Forward();
    }
  if (lang == 4)
    {
    start_pict_dialog("Front");
    add_pict_item("Empire Dress","");
    add_pict_item("Empire Dress with Band","");
    run_pict("Next");
    Flow[0] = get_pict_result();
    Forward();
    }
  if (lang == 5)
    {
    start_pict_dialog("Front");
    add_pict_item("Empire Dress","");
    add_pict_item("Empire Dress with Band","");
    run_pict("Next");
    Flow[0] = get_pict_result();
    Forward();
    }
  if (lang == 6)
    {
    start_pict_dialog("Front");
    add_pict_item("Empire Dress","");
    add_pict_item("Empire Dress with Band","");
    run_pict("Next");
    Flow[0] = get_pict_result();
    Forward();
    }
}

Popup1()
{
  if (lang == 0)
    {
    start_pict_dialog("Empire Dress");
    add_pict_item("A-Line","empire-aline.jpg");
    add_pict_item("Fitted Dress","empiredress2.jpg");
    add_pict_item("Fitted Panel Dress","empire-panel.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 1)
    {
    start_pict_dialog("Empire Dress");
    add_pict_item("A-Line","empire-aline.jpg");
    add_pict_item("Fitted Dress","empiredress2.jpg");
    add_pict_item("Fitted Panel Dress","empire-panel.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 2)
    {
    start_pict_dialog("Empire Dress");
    add_pict_item("A-Line","empire-aline.jpg");
    add_pict_item("Fitted Dress","empiredress2.jpg");
    add_pict_item("Fitted Panel Dress","empire-panel.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 3)
    {
    start_pict_dialog("Empire Dress");
    add_pict_item("A-Line","empire-aline.jpg");
    add_pict_item("Fitted Dress","empiredress2.jpg");
    add_pict_item("Fitted Panel Dress","empire-panel.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 4)
    {
    start_pict_dialog("Empire Dress");
    add_pict_item("A-Line","empire-aline.jpg");
    add_pict_item("Fitted Dress","empiredress2.jpg");
    add_pict_item("Fitted Panel Dress","empire-panel.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 5)
    {
    start_pict_dialog("Empire Dress");
    add_pict_item("A-Line","empire-aline.jpg");
    add_pict_item("Fitted Dress","empiredress2.jpg");
    add_pict_item("Fitted Panel Dress","empire-panel.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 6)
    {
    start_pict_dialog("Empire Dress");
    add_pict_item("A-Line","empire-aline.jpg");
    add_pict_item("Fitted Dress","empiredress2.jpg");
    add_pict_item("Fitted Panel Dress","empire-panel.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
}

Popup2()
{
  if (lang == 0)
    {
    start_pict_dialog("Empire Dress with Band");
    add_pict_item("A-Line Dress","band-empire.jpg");
    add_pict_item("Fitted Dress with Band","empiredress1.jpg");
    add_pict_item("Fitted Panel Dress with Band","band-panel.jpg");
    add_pict_item("Wrap dress","band-wrap.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 1)
    {
    start_pict_dialog("Empire Dress with Band");
    add_pict_item("A-Line Dress","band-empire.jpg");
    add_pict_item("Fitted Dress with Band","empiredress1.jpg");
    add_pict_item("Fitted Panel Dress with Band","band-panel.jpg");
    add_pict_item("Wrap dress","band-wrap.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 2)
    {
    start_pict_dialog("Empire Dress with Band");
    add_pict_item("A-Line Dress","band-empire.jpg");
    add_pict_item("Fitted Dress with Band","empiredress1.jpg");
    add_pict_item("Fitted Panel Dress with Band","band-panel.jpg");
    add_pict_item("Wrap dress","band-wrap.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 3)
    {
    start_pict_dialog("Empire Dress with Band");
    add_pict_item("A-Line Dress","band-empire.jpg");
    add_pict_item("Fitted Dress with Band","empiredress1.jpg");
    add_pict_item("Fitted Panel Dress with Band","band-panel.jpg");
    add_pict_item("Wrap dress","band-wrap.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 4)
    {
    start_pict_dialog("Empire Dress with Band");
    add_pict_item("A-Line Dress","band-empire.jpg");
    add_pict_item("Fitted Dress with Band","empiredress1.jpg");
    add_pict_item("Fitted Panel Dress with Band","band-panel.jpg");
    add_pict_item("Wrap dress","band-wrap.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 5)
    {
    start_pict_dialog("Empire Dress with Band");
    add_pict_item("A-Line Dress","band-empire.jpg");
    add_pict_item("Fitted Dress with Band","empiredress1.jpg");
    add_pict_item("Fitted Panel Dress with Band","band-panel.jpg");
    add_pict_item("Wrap dress","band-wrap.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 6)
    {
    start_pict_dialog("Empire Dress with Band");
    add_pict_item("A-Line Dress","band-empire.jpg");
    add_pict_item("Fitted Dress with Band","empiredress1.jpg");
    add_pict_item("Fitted Panel Dress with Band","band-panel.jpg");
    add_pict_item("Wrap dress","band-wrap.jpg");
	  if (run_pict("Back", "Next"))
	    {
      Flow[0] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
}

Popup3()
{
  if (lang == 0)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 1)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 2)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 3)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 4)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 5)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 6)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
}

Popup4()
{
  if (lang == 0)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 1)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 2)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 3)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 4)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 5)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 6)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("empire with band","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
}

Popup5()
{
  if (lang == 0)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 1)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 2)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 3)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 4)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 5)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 6)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
}

Popup6()
{
    Flow[1] = 0;
  Forward();
}

Popup7()
{
  if (lang == 0)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 1)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 2)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 3)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 4)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 5)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 6)
    {
    start_pict_dialog("Panel Lines");
    add_pict_item("empire with band","");
    add_pict_item("No Panels","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[1] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
}

Popup8()
{
    Flow[1] = 0;
  Forward();
}

Popup9()
{
    Flow[1] = 0;
  Forward();
}

Popup10()
{
    Flow[1] = 0;
  Forward();
}

Popup11()
{
  if (lang == 0)
    {
    start_pict_dialog("Sleeve");
    add_pict_item("Short","short-sleeve.jpg");
    add_pict_item("Elbow","elbow.jpg");
    add_pict_item("Three Quarter","threequarter.jpg");
    add_pict_item("Long","long-sleeve.jpg");
    add_pict_item("None","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[2] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 1)
    {
    start_pict_dialog("Sleeve");
    add_pict_item("Short","short-sleeve.jpg");
    add_pict_item("Elbow","elbow.jpg");
    add_pict_item("Three Quarter","threequarter.jpg");
    add_pict_item("Long","long-sleeve.jpg");
    add_pict_item("None","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[2] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 2)
    {
    start_pict_dialog("Sleeve");
    add_pict_item("Short","short-sleeve.jpg");
    add_pict_item("Elbow","elbow.jpg");
    add_pict_item("Three Quarter","threequarter.jpg");
    add_pict_item("Long","long-sleeve.jpg");
    add_pict_item("None","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[2] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 3)
    {
    start_pict_dialog("Sleeve");
    add_pict_item("Short","short-sleeve.jpg");
    add_pict_item("Elbow","elbow.jpg");
    add_pict_item("Three Quarter","threequarter.jpg");
    add_pict_item("Long","long-sleeve.jpg");
    add_pict_item("None","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[2] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 4)
    {
    start_pict_dialog("Sleeve");
    add_pict_item("Short","short-sleeve.jpg");
    add_pict_item("Elbow","elbow.jpg");
    add_pict_item("Three Quarter","threequarter.jpg");
    add_pict_item("Long","long-sleeve.jpg");
    add_pict_item("None","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[2] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 5)
    {
    start_pict_dialog("Sleeve");
    add_pict_item("Short","short-sleeve.jpg");
    add_pict_item("Elbow","elbow.jpg");
    add_pict_item("Three Quarter","threequarter.jpg");
    add_pict_item("Long","long-sleeve.jpg");
    add_pict_item("None","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[2] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
  if (lang == 6)
    {
    start_pict_dialog("Sleeve");
    add_pict_item("Short","short-sleeve.jpg");
    add_pict_item("Elbow","elbow.jpg");
    add_pict_item("Three Quarter","threequarter.jpg");
    add_pict_item("Long","long-sleeve.jpg");
    add_pict_item("None","");
	  if (run_pict("Back", "Next"))
	    {
      Flow[2] = get_pict_result();
      Forward();
	    }
	  else
	    {
      Backward();
	    }
    }
}

Forward()
  {
  if (index == 11)
    {
    if (Flow[2] == 4)
      {
      Flow[2]=5;
      done = 1;
      }
    if (Flow[2] == 3)
      {
      Flow[2]=4;
      done = 1;
      }
    if (Flow[2] == 2)
      {
      Flow[2]=3;
      done = 1;
      }
    if (Flow[2] == 1)
      {
      Flow[2]=2;
      done = 1;
      }
    if (Flow[2] == 0)
      {
      Flow[2]=1;
      done = 1;
      }
    }
  if (index == 10)
    {
    done=1;
    }
  if (index == 9)
    {
    if (Flow[1] == 0)
      {
      Flow[1]=3;
      index = 11;
      }
    }
  if (index == 8)
    {
    if (Flow[1] == 0)
      {
      Flow[1]=2;
      index = 11;
      }
    }
  if (index == 7)
    {
    if (Flow[1] == 1)
      {
      Flow[1]=3;
      index = 11;
      }
    if (Flow[1] == 0)
      {
      Flow[1]=2;
      index = 11;
      }
    }
  if (index == 6)
    {
    if (Flow[1] == 0)
      {
      Flow[1]=1;
      index = 11;
      }
    }
  if (index == 5)
    {
    if (Flow[1] == 1)
      {
      Flow[1]=3;
      index = 11;
      }
    if (Flow[1] == 0)
      {
      Flow[1]=1;
      index = 11;
      }
    }
  if (index == 4)
    {
    if (Flow[1] == 1)
      {
      Flow[1]=2;
      index = 11;
      }
    if (Flow[1] == 0)
      {
      Flow[1]=1;
      index = 11;
      }
    }
  if (index == 3)
    {
    if (Flow[1] == 2)
      {
      Flow[1]=3;
      index = 11;
      }
    if (Flow[1] == 1)
      {
      Flow[1]=2;
      index = 11;
      }
    if (Flow[1] == 0)
      {
      Flow[1]=1;
      index = 11;
      }
    }
  if (index == 2)
    {
    if (Flow[0] == 3)
      {
      Flow[0]=9;
      index = 3;
      if ( (Flow[0] == 8) || (Flow[0] == 4))
        { index = 4; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 5; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 6; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 7; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 8; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)))
        { index = 9; }
      if ( (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 10; }
      }
    if (Flow[0] == 2)
      {
      Flow[0]=8;
      index = 3;
      if ( (Flow[0] == 8) || (Flow[0] == 4))
        { index = 4; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 5; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 6; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 7; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 8; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)))
        { index = 9; }
      if ( (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 10; }
      }
    if (Flow[0] == 1)
      {
      Flow[0]=7;
      index = 3;
      if ( (Flow[0] == 8) || (Flow[0] == 4))
        { index = 4; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 5; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 6; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 7; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 8; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)))
        { index = 9; }
      if ( (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 10; }
      }
    if (Flow[0] == 0)
      {
      Flow[0]=6;
      index = 3;
      if ( (Flow[0] == 8) || (Flow[0] == 4))
        { index = 4; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 5; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 6; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 7; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 8; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)))
        { index = 9; }
      if ( (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 10; }
      }
    }
  if (index == 1)
    {
    if (Flow[0] == 2)
      {
      Flow[0]=4;
      index = 3;
      if ( (Flow[0] == 8) || (Flow[0] == 4))
        { index = 4; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 5; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 6; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 7; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 8; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)))
        { index = 9; }
      if ( (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 10; }
      }
    if (Flow[0] == 1)
      {
      Flow[0]=3;
      index = 3;
      if ( (Flow[0] == 8) || (Flow[0] == 4))
        { index = 4; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 5; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 6; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 7; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 8; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)))
        { index = 9; }
      if ( (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 10; }
      }
    if (Flow[0] == 0)
      {
      Flow[0]=2;
      index = 3;
      if ( (Flow[0] == 8) || (Flow[0] == 4))
        { index = 4; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 5; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 6; }
      if ( (((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2))
        { index = 7; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 8; }
      if ( ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)))
        { index = 9; }
      if ( (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))) && ((Flow[0] == 8) || (Flow[0] == 4)))
        { index = 10; }
      }
    }
  if (index == 0)
    {
    if (Flow[0] == 1)
      {
      Flow[0]=5;
      index = 2;
      }
    if (Flow[0] == 0)
      {
      Flow[0]=1;
      index = 1;
      }
    }
  }

Backward()
  {
  if (index == 1)
    {
    if (Flow[0] == 1) { index = 0; } 
    }
  if (index == 2)
    {
    if (Flow[0] == 5) { index = 0; } 
    }
  if (index == 3)
    {
    if (Flow[0] == 2) { index = 1; } 
    if (Flow[0] == 3) { index = 1; } 
    if (Flow[0] == 4) { index = 1; } 
    if (Flow[0] == 6) { index = 2; } 
    if (Flow[0] == 7) { index = 2; } 
    if (Flow[0] == 8) { index = 2; } 
    if (Flow[0] == 9) { index = 2; } 
    }
  if (index == 4)
    {
    if (Flow[0] == 2) { index = 1; } 
    if (Flow[0] == 3) { index = 1; } 
    if (Flow[0] == 4) { index = 1; } 
    if (Flow[0] == 6) { index = 2; } 
    if (Flow[0] == 7) { index = 2; } 
    if (Flow[0] == 8) { index = 2; } 
    if (Flow[0] == 9) { index = 2; } 
    }
  if (index == 5)
    {
    if (Flow[0] == 2) { index = 1; } 
    if (Flow[0] == 3) { index = 1; } 
    if (Flow[0] == 4) { index = 1; } 
    if (Flow[0] == 6) { index = 2; } 
    if (Flow[0] == 7) { index = 2; } 
    if (Flow[0] == 8) { index = 2; } 
    if (Flow[0] == 9) { index = 2; } 
    }
  if (index == 6)
    {
    if (Flow[0] == 2) { index = 1; } 
    if (Flow[0] == 3) { index = 1; } 
    if (Flow[0] == 4) { index = 1; } 
    if (Flow[0] == 6) { index = 2; } 
    if (Flow[0] == 7) { index = 2; } 
    if (Flow[0] == 8) { index = 2; } 
    if (Flow[0] == 9) { index = 2; } 
    }
  if (index == 7)
    {
    if (Flow[0] == 2) { index = 1; } 
    if (Flow[0] == 3) { index = 1; } 
    if (Flow[0] == 4) { index = 1; } 
    if (Flow[0] == 6) { index = 2; } 
    if (Flow[0] == 7) { index = 2; } 
    if (Flow[0] == 8) { index = 2; } 
    if (Flow[0] == 9) { index = 2; } 
    }
  if (index == 8)
    {
    if (Flow[0] == 2) { index = 1; } 
    if (Flow[0] == 3) { index = 1; } 
    if (Flow[0] == 4) { index = 1; } 
    if (Flow[0] == 6) { index = 2; } 
    if (Flow[0] == 7) { index = 2; } 
    if (Flow[0] == 8) { index = 2; } 
    if (Flow[0] == 9) { index = 2; } 
    }
  if (index == 9)
    {
    if (Flow[0] == 2) { index = 1; } 
    if (Flow[0] == 3) { index = 1; } 
    if (Flow[0] == 4) { index = 1; } 
    if (Flow[0] == 6) { index = 2; } 
    if (Flow[0] == 7) { index = 2; } 
    if (Flow[0] == 8) { index = 2; } 
    if (Flow[0] == 9) { index = 2; } 
    }
  if (index == 10)
    {
    if (Flow[0] == 2) { index = 1; } 
    if (Flow[0] == 3) { index = 1; } 
    if (Flow[0] == 4) { index = 1; } 
    if (Flow[0] == 6) { index = 2; } 
    if (Flow[0] == 7) { index = 2; } 
    if (Flow[0] == 8) { index = 2; } 
    if (Flow[0] == 9) { index = 2; } 
    }
  if (index == 11)
    {
    if (Flow[1] == 1) { index = 3; } 
    if (Flow[1] == 2) { index = 3; } 
    if (Flow[1] == 3) { index = 3; } 
    if ((Flow[1] == 1) && ((Flow[0] == 8) || (Flow[0] == 4)) ) { index = 4; } 
    if ((Flow[1] == 2) && ((Flow[0] == 8) || (Flow[0] == 4)) ) { index = 4; } 
    if ((Flow[1] == 1) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) ) { index = 5; } 
    if ((Flow[1] == 3) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) ) { index = 5; } 
    if ((Flow[1] == 1) && (((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4))) )
      {    index = 6;
    Backward();      }    if ((Flow[1] == 2) && ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) ) { index = 7; } 
    if ((Flow[1] == 3) && ((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) ) { index = 7; } 
    if ((Flow[1] == 2) && (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((Flow[0] == 8) || (Flow[0] == 4))) )
      {    index = 8;
    Backward();      }    if ((Flow[1] == 3) && (((((((Flow[0] == 9) || (Flow[0] == 8)) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 3)) || (Flow[0] == 2)) && ((((((Flow[0] == 9) || (Flow[0] == 7)) || (Flow[0] == 6)) || (Flow[0] == 4)) || (Flow[0] == 3)) || (Flow[0] == 2))) )
      {    index = 9;
    Backward();      }    }
  }

Flow0View0()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View0");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View0Points();
  }

Flow0View0Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  }

Flow0View0Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object Back waist dart
  if (HideObj[2] == 0)
    {

  Obj[2] = newobject("poly");
  current_point=addpoint(x[96],y[96],"LINE");
  current_point=addpoint(x[94],y[94],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[139],y[139],"LINE");
    if (lang == 0) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 1) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 2) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 3) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 4) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 5) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 6) { name_object(Obj[2],"Back waist dart"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object LowerFront
  if (HideObj[8] == 0)
    {

  Obj[8] = newobject("poly");
  current_point=addpoint(x[98],y[98],"LINE");
  current_point=addpoint(x[136],y[136],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[166],y[166],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[51],y[51],"LINE");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[4],y[4],"LINE");
  current_point=addpoint(x[147],y[147],"LINE");
  current_point=addpoint(x[146],y[146],"LINE");
  current_point=addpoint(x[145],y[145],"LINE");
  current_point=addpoint(x[209],y[209],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[33],y[33],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[39],y[39],"XARC_CORNER");
  current_point=addpoint(x[37],y[37],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[8],"LowerFront"); }
    if (lang == 1) { name_object(Obj[8],"LowerFront"); }
    if (lang == 2) { name_object(Obj[8],"LowerFront"); }
    if (lang == 3) { name_object(Obj[8],"LowerFront"); }
    if (lang == 4) { name_object(Obj[8],"LowerFront"); }
    if (lang == 5) { name_object(Obj[8],"LowerFront"); }
    if (lang == 6) { name_object(Obj[8],"LowerFront"); }
    }

  //Object Lowerback
  if (HideObj[9] == 0)
    {

  Obj[9] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[97],y[97],"LINE");
  current_point=addpoint(x[90],y[90],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"XARC_CORNER");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[151],y[151],"LINE");
  current_point=addpoint(x[152],y[152],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[9],"Lowerback"); }
    if (lang == 1) { name_object(Obj[9],"Lowerback"); }
    if (lang == 2) { name_object(Obj[9],"Lowerback"); }
    if (lang == 3) { name_object(Obj[9],"Lowerback"); }
    if (lang == 4) { name_object(Obj[9],"Lowerback"); }
    if (lang == 5) { name_object(Obj[9],"Lowerback"); }
    if (lang == 6) { name_object(Obj[9],"Lowerback"); }
    }

  //Object LowerFrontDart
  if (HideObj[10] == 0)
    {

  Obj[10] = newobject("poly");
  current_point=addpoint(x[51],y[51],"LINE");
  current_point=addpoint(x[43],y[43],"LINE");
  current_point=addpoint(x[67],y[67],"LINE");
  current_point=addpoint(x[44],y[44],"LINE");
  current_point=addpoint(x[50],y[50],"OPEN");
    if (lang == 0) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 1) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 2) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 3) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 4) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 5) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 6) { name_object(Obj[10],"LowerFrontDart"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object SlitLine
  if (HideObj[12] == 0)
    {

  Obj[12] = newobject("poly");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[155],y[155],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[142],y[142],"OPEN");
    if (lang == 0) { name_object(Obj[12],"SlitLine"); }
    if (lang == 1) { name_object(Obj[12],"SlitLine"); }
    if (lang == 2) { name_object(Obj[12],"SlitLine"); }
    if (lang == 3) { name_object(Obj[12],"SlitLine"); }
    if (lang == 4) { name_object(Obj[12],"SlitLine"); }
    if (lang == 5) { name_object(Obj[12],"SlitLine"); }
    if (lang == 6) { name_object(Obj[12],"SlitLine"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object txt2c
  if (HideObj[17] == 0)
    {
  if (lang == 0)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-1),"LINE");
    if (lang == 0) { name_object(Obj[17],"txt2c"); }
    if (lang == 1) { name_object(Obj[17],"txt2c"); }
    if (lang == 2) { name_object(Obj[17],"txt2c"); }
    if (lang == 3) { name_object(Obj[17],"txt2c"); }
    if (lang == 4) { name_object(Obj[17],"txt2c"); }
    if (lang == 5) { name_object(Obj[17],"txt2c"); }
    if (lang == 6) { name_object(Obj[17],"txt2c"); }
    }

  //Object txt2d
  if (HideObj[18] == 0)
    {
  if (lang == 0)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-1),"LINE");
    if (lang == 0) { name_object(Obj[18],"txt2d"); }
    if (lang == 1) { name_object(Obj[18],"txt2d"); }
    if (lang == 2) { name_object(Obj[18],"txt2d"); }
    if (lang == 3) { name_object(Obj[18],"txt2d"); }
    if (lang == 4) { name_object(Obj[18],"txt2d"); }
    if (lang == 5) { name_object(Obj[18],"txt2d"); }
    if (lang == 6) { name_object(Obj[18],"txt2d"); }
    }

  //Object txt2e
  if (HideObj[19] == 0)
    {
  if (lang == 0)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-2),"LINE");
    if (lang == 0) { name_object(Obj[19],"txt2e"); }
    if (lang == 1) { name_object(Obj[19],"txt2e"); }
    if (lang == 2) { name_object(Obj[19],"txt2e"); }
    if (lang == 3) { name_object(Obj[19],"txt2e"); }
    if (lang == 4) { name_object(Obj[19],"txt2e"); }
    if (lang == 5) { name_object(Obj[19],"txt2e"); }
    if (lang == 6) { name_object(Obj[19],"txt2e"); }
    }

  //Object txt2f
  if (HideObj[20] == 0)
    {
  if (lang == 0)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[20],"txt2f"); }
    if (lang == 1) { name_object(Obj[20],"txt2f"); }
    if (lang == 2) { name_object(Obj[20],"txt2f"); }
    if (lang == 3) { name_object(Obj[20],"txt2f"); }
    if (lang == 4) { name_object(Obj[20],"txt2f"); }
    if (lang == 5) { name_object(Obj[20],"txt2f"); }
    if (lang == 6) { name_object(Obj[20],"txt2f"); }
    }

  //Object txt2g
  if (HideObj[21] == 0)
    {
  if (lang == 0)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[145]+1),(y[145]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[21],"txt2g"); }
    if (lang == 1) { name_object(Obj[21],"txt2g"); }
    if (lang == 2) { name_object(Obj[21],"txt2g"); }
    if (lang == 3) { name_object(Obj[21],"txt2g"); }
    if (lang == 4) { name_object(Obj[21],"txt2g"); }
    if (lang == 5) { name_object(Obj[21],"txt2g"); }
    if (lang == 6) { name_object(Obj[21],"txt2g"); }
    }

  //Object txt2h
  if (HideObj[22] == 0)
    {
  if (lang == 0)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[4],(y[4]+1),"LINE");
    if (lang == 0) { name_object(Obj[22],"txt2h"); }
    if (lang == 1) { name_object(Obj[22],"txt2h"); }
    if (lang == 2) { name_object(Obj[22],"txt2h"); }
    if (lang == 3) { name_object(Obj[22],"txt2h"); }
    if (lang == 4) { name_object(Obj[22],"txt2h"); }
    if (lang == 5) { name_object(Obj[22],"txt2h"); }
    if (lang == 6) { name_object(Obj[22],"txt2h"); }
    }

  //Object txt2i
  if (HideObj[23] == 0)
    {
  if (lang == 0)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[23],"txt2i"); }
    if (lang == 1) { name_object(Obj[23],"txt2i"); }
    if (lang == 2) { name_object(Obj[23],"txt2i"); }
    if (lang == 3) { name_object(Obj[23],"txt2i"); }
    if (lang == 4) { name_object(Obj[23],"txt2i"); }
    if (lang == 5) { name_object(Obj[23],"txt2i"); }
    if (lang == 6) { name_object(Obj[23],"txt2i"); }
    }

  //Object backband1
  if (HideObj[24] == 0)
    {

  Obj[24] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[255],y[255],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[256],y[256],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[257],y[257],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[270],y[270],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[269],y[269],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[258],y[258],"LINE");
  current_point=addpoint(x[259],y[259],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[95],y[95],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[160],y[160],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  current_point=addpoint(x[271],y[271],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
    if (lang == 0) { name_object(Obj[24],"backband1"); }
    if (lang == 1) { name_object(Obj[24],"backband1"); }
    if (lang == 2) { name_object(Obj[24],"backband1"); }
    if (lang == 3) { name_object(Obj[24],"backband1"); }
    if (lang == 4) { name_object(Obj[24],"backband1"); }
    if (lang == 5) { name_object(Obj[24],"backband1"); }
    if (lang == 6) { name_object(Obj[24],"backband1"); }
    }

  //Object frontband1
  if (HideObj[25] == 0)
    {

  Obj[25] = newobject("poly");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[163],y[163],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[44],y[44],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[244],y[244],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[245],y[245],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[246],y[246],"LINE");
  current_point=addpoint(x[267],y[267],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[268],y[268],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[239],y[239],"LINE");
  current_point=addpoint(x[240],y[240],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[241],y[241],"LINE");
  notch_type(current_point,"TAB",0);
    if (lang == 0) { name_object(Obj[25],"frontband1"); }
    if (lang == 1) { name_object(Obj[25],"frontband1"); }
    if (lang == 2) { name_object(Obj[25],"frontband1"); }
    if (lang == 3) { name_object(Obj[25],"frontband1"); }
    if (lang == 4) { name_object(Obj[25],"frontband1"); }
    if (lang == 5) { name_object(Obj[25],"frontband1"); }
    if (lang == 6) { name_object(Obj[25],"frontband1"); }
    }

  //Object lowerRotate1
  if (HideObj[26] == 0)
    {

  Obj[26] = newobject("poly");
  current_point=addpoint(x[173],y[173],"LINE");
  current_point=addpoint(x[174],y[174],"LINE");
  current_point=addpoint(x[175],y[175],"LINE");
  current_point=addpoint(x[176],y[176],"LINE");
  current_point=addpoint(x[177],y[177],"LINE");
  current_point=addpoint(x[178],y[178],"LINE");
  current_point=addpoint(x[179],y[179],"LINE");
  current_point=addpoint(x[180],y[180],"OPEN");
    if (lang == 0) { name_object(Obj[26],"lowerRotate1"); }
    if (lang == 1) { name_object(Obj[26],"lowerRotate1"); }
    if (lang == 2) { name_object(Obj[26],"lowerRotate1"); }
    if (lang == 3) { name_object(Obj[26],"lowerRotate1"); }
    if (lang == 4) { name_object(Obj[26],"lowerRotate1"); }
    if (lang == 5) { name_object(Obj[26],"lowerRotate1"); }
    if (lang == 6) { name_object(Obj[26],"lowerRotate1"); }
    }

  //Object lowerRotate2
  if (HideObj[27] == 0)
    {

  Obj[27] = newobject("poly");
  current_point=addpoint(x[181],y[181],"LINE");
  current_point=addpoint(x[182],y[182],"LINE");
  current_point=addpoint(x[183],y[183],"LINE");
  current_point=addpoint(x[184],y[184],"LINE");
  current_point=addpoint(x[185],y[185],"LINE");
  current_point=addpoint(x[186],y[186],"LINE");
  current_point=addpoint(x[187],y[187],"LINE");
  current_point=addpoint(x[188],y[188],"OPEN");
    if (lang == 0) { name_object(Obj[27],"lowerRotate2"); }
    if (lang == 1) { name_object(Obj[27],"lowerRotate2"); }
    if (lang == 2) { name_object(Obj[27],"lowerRotate2"); }
    if (lang == 3) { name_object(Obj[27],"lowerRotate2"); }
    if (lang == 4) { name_object(Obj[27],"lowerRotate2"); }
    if (lang == 5) { name_object(Obj[27],"lowerRotate2"); }
    if (lang == 6) { name_object(Obj[27],"lowerRotate2"); }
    }

  //Object banddressalinerotate1
  if (HideObj[28] == 0)
    {

  Obj[28] = newobject("poly");
  current_point=addpoint(x[211],y[211],"LINE");
  current_point=addpoint(x[212],y[212],"LINE");
  current_point=addpoint(x[213],y[213],"LINE");
  current_point=addpoint(x[214],y[214],"LINE");
  current_point=addpoint(x[215],y[215],"LINE");
  current_point=addpoint(x[216],y[216],"LINE");
  current_point=addpoint(x[217],y[217],"LINE");
  current_point=addpoint(x[218],y[218],"OPEN");
    if (lang == 0) { name_object(Obj[28],"banddressalinerotate1"); }
    if (lang == 1) { name_object(Obj[28],"banddressalinerotate1"); }
    if (lang == 2) { name_object(Obj[28],"banddressalinerotate1"); }
    if (lang == 3) { name_object(Obj[28],"banddressalinerotate1"); }
    if (lang == 4) { name_object(Obj[28],"banddressalinerotate1"); }
    if (lang == 5) { name_object(Obj[28],"banddressalinerotate1"); }
    if (lang == 6) { name_object(Obj[28],"banddressalinerotate1"); }
    }

  //Object banddressalinerotate2
  if (HideObj[29] == 0)
    {

  Obj[29] = newobject("poly");
  current_point=addpoint(x[219],y[219],"LINE");
  current_point=addpoint(x[220],y[220],"LINE");
  current_point=addpoint(x[221],y[221],"LINE");
  current_point=addpoint(x[222],y[222],"LINE");
  current_point=addpoint(x[223],y[223],"LINE");
  current_point=addpoint(x[224],y[224],"LINE");
  current_point=addpoint(x[225],y[225],"OPEN");
    if (lang == 0) { name_object(Obj[29],"banddressalinerotate2"); }
    if (lang == 1) { name_object(Obj[29],"banddressalinerotate2"); }
    if (lang == 2) { name_object(Obj[29],"banddressalinerotate2"); }
    if (lang == 3) { name_object(Obj[29],"banddressalinerotate2"); }
    if (lang == 4) { name_object(Obj[29],"banddressalinerotate2"); }
    if (lang == 5) { name_object(Obj[29],"banddressalinerotate2"); }
    if (lang == 6) { name_object(Obj[29],"banddressalinerotate2"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object topline
  if (HideObj[36] == 0)
    {

  Obj[36] = newobject("poly");
  current_point=addpoint(x[276],y[276],"LINE");
  current_point=addpoint(x[282],y[282],"LINE");
  current_point=addpoint(x[283],y[283],"OPEN");
    if (lang == 0) { name_object(Obj[36],"topline"); }
    if (lang == 1) { name_object(Obj[36],"topline"); }
    if (lang == 2) { name_object(Obj[36],"topline"); }
    if (lang == 3) { name_object(Obj[36],"topline"); }
    if (lang == 4) { name_object(Obj[36],"topline"); }
    if (lang == 5) { name_object(Obj[36],"topline"); }
    if (lang == 6) { name_object(Obj[36],"topline"); }
    }

  //Object rotateskt
  if (HideObj[37] == 0)
    {

  Obj[37] = newobject("poly");
  current_point=addpoint(x[291],y[291],"LINE");
  current_point=addpoint(x[292],y[292],"LINE");
  current_point=addpoint(x[293],y[293],"LINE");
  current_point=addpoint(x[294],y[294],"LINE");
    if (lang == 0) { name_object(Obj[37],"rotateskt"); }
    if (lang == 1) { name_object(Obj[37],"rotateskt"); }
    if (lang == 2) { name_object(Obj[37],"rotateskt"); }
    if (lang == 3) { name_object(Obj[37],"rotateskt"); }
    if (lang == 4) { name_object(Obj[37],"rotateskt"); }
    if (lang == 5) { name_object(Obj[37],"rotateskt"); }
    if (lang == 6) { name_object(Obj[37],"rotateskt"); }
    }

  //Object  txt1c
  if (HideObj[38] == 0)
    {
  if (lang == 0)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-2),"LINE");
    if (lang == 0) { name_object(Obj[38]," txt1c"); }
    if (lang == 1) { name_object(Obj[38]," txt1c"); }
    if (lang == 2) { name_object(Obj[38]," txt1c"); }
    if (lang == 3) { name_object(Obj[38]," txt1c"); }
    if (lang == 4) { name_object(Obj[38]," txt1c"); }
    if (lang == 5) { name_object(Obj[38]," txt1c"); }
    if (lang == 6) { name_object(Obj[38]," txt1c"); }
    }

  //Object txt1d
  if (HideObj[39] == 0)
    {
  if (lang == 0)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-3),"LINE");
    if (lang == 0) { name_object(Obj[39],"txt1d"); }
    if (lang == 1) { name_object(Obj[39],"txt1d"); }
    if (lang == 2) { name_object(Obj[39],"txt1d"); }
    if (lang == 3) { name_object(Obj[39],"txt1d"); }
    if (lang == 4) { name_object(Obj[39],"txt1d"); }
    if (lang == 5) { name_object(Obj[39],"txt1d"); }
    if (lang == 6) { name_object(Obj[39],"txt1d"); }
    }

  //Object txt1e
  if (HideObj[40] == 0)
    {
  if (lang == 0)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),y[148],"LINE");
    if (lang == 0) { name_object(Obj[40],"txt1e"); }
    if (lang == 1) { name_object(Obj[40],"txt1e"); }
    if (lang == 2) { name_object(Obj[40],"txt1e"); }
    if (lang == 3) { name_object(Obj[40],"txt1e"); }
    if (lang == 4) { name_object(Obj[40],"txt1e"); }
    if (lang == 5) { name_object(Obj[40],"txt1e"); }
    if (lang == 6) { name_object(Obj[40],"txt1e"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(8, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(9, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(24, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(25, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View1()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View1");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View1Points();
  }

Flow0View1Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  }

Flow0View1Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object Back waist dart
  if (HideObj[2] == 0)
    {

  Obj[2] = newobject("poly");
  current_point=addpoint(x[96],y[96],"LINE");
  current_point=addpoint(x[94],y[94],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[139],y[139],"LINE");
    if (lang == 0) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 1) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 2) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 3) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 4) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 5) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 6) { name_object(Obj[2],"Back waist dart"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object LowerFront
  if (HideObj[8] == 0)
    {

  Obj[8] = newobject("poly");
  current_point=addpoint(x[98],y[98],"LINE");
  current_point=addpoint(x[136],y[136],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[166],y[166],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[51],y[51],"LINE");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[4],y[4],"LINE");
  current_point=addpoint(x[147],y[147],"LINE");
  current_point=addpoint(x[146],y[146],"LINE");
  current_point=addpoint(x[145],y[145],"LINE");
  current_point=addpoint(x[209],y[209],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[33],y[33],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[39],y[39],"XARC_CORNER");
  current_point=addpoint(x[37],y[37],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[8],"LowerFront"); }
    if (lang == 1) { name_object(Obj[8],"LowerFront"); }
    if (lang == 2) { name_object(Obj[8],"LowerFront"); }
    if (lang == 3) { name_object(Obj[8],"LowerFront"); }
    if (lang == 4) { name_object(Obj[8],"LowerFront"); }
    if (lang == 5) { name_object(Obj[8],"LowerFront"); }
    if (lang == 6) { name_object(Obj[8],"LowerFront"); }
    }

  //Object Lowerback
  if (HideObj[9] == 0)
    {

  Obj[9] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[97],y[97],"LINE");
  current_point=addpoint(x[90],y[90],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"XARC_CORNER");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[151],y[151],"LINE");
  current_point=addpoint(x[152],y[152],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[9],"Lowerback"); }
    if (lang == 1) { name_object(Obj[9],"Lowerback"); }
    if (lang == 2) { name_object(Obj[9],"Lowerback"); }
    if (lang == 3) { name_object(Obj[9],"Lowerback"); }
    if (lang == 4) { name_object(Obj[9],"Lowerback"); }
    if (lang == 5) { name_object(Obj[9],"Lowerback"); }
    if (lang == 6) { name_object(Obj[9],"Lowerback"); }
    }

  //Object LowerFrontDart
  if (HideObj[10] == 0)
    {

  Obj[10] = newobject("poly");
  current_point=addpoint(x[51],y[51],"LINE");
  current_point=addpoint(x[43],y[43],"LINE");
  current_point=addpoint(x[67],y[67],"LINE");
  current_point=addpoint(x[44],y[44],"LINE");
  current_point=addpoint(x[50],y[50],"OPEN");
    if (lang == 0) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 1) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 2) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 3) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 4) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 5) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 6) { name_object(Obj[10],"LowerFrontDart"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object SlitLine
  if (HideObj[12] == 0)
    {

  Obj[12] = newobject("poly");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[155],y[155],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[142],y[142],"OPEN");
    if (lang == 0) { name_object(Obj[12],"SlitLine"); }
    if (lang == 1) { name_object(Obj[12],"SlitLine"); }
    if (lang == 2) { name_object(Obj[12],"SlitLine"); }
    if (lang == 3) { name_object(Obj[12],"SlitLine"); }
    if (lang == 4) { name_object(Obj[12],"SlitLine"); }
    if (lang == 5) { name_object(Obj[12],"SlitLine"); }
    if (lang == 6) { name_object(Obj[12],"SlitLine"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object txt2c
  if (HideObj[17] == 0)
    {
  if (lang == 0)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-1),"LINE");
    if (lang == 0) { name_object(Obj[17],"txt2c"); }
    if (lang == 1) { name_object(Obj[17],"txt2c"); }
    if (lang == 2) { name_object(Obj[17],"txt2c"); }
    if (lang == 3) { name_object(Obj[17],"txt2c"); }
    if (lang == 4) { name_object(Obj[17],"txt2c"); }
    if (lang == 5) { name_object(Obj[17],"txt2c"); }
    if (lang == 6) { name_object(Obj[17],"txt2c"); }
    }

  //Object txt2d
  if (HideObj[18] == 0)
    {
  if (lang == 0)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-1),"LINE");
    if (lang == 0) { name_object(Obj[18],"txt2d"); }
    if (lang == 1) { name_object(Obj[18],"txt2d"); }
    if (lang == 2) { name_object(Obj[18],"txt2d"); }
    if (lang == 3) { name_object(Obj[18],"txt2d"); }
    if (lang == 4) { name_object(Obj[18],"txt2d"); }
    if (lang == 5) { name_object(Obj[18],"txt2d"); }
    if (lang == 6) { name_object(Obj[18],"txt2d"); }
    }

  //Object txt2e
  if (HideObj[19] == 0)
    {
  if (lang == 0)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-2),"LINE");
    if (lang == 0) { name_object(Obj[19],"txt2e"); }
    if (lang == 1) { name_object(Obj[19],"txt2e"); }
    if (lang == 2) { name_object(Obj[19],"txt2e"); }
    if (lang == 3) { name_object(Obj[19],"txt2e"); }
    if (lang == 4) { name_object(Obj[19],"txt2e"); }
    if (lang == 5) { name_object(Obj[19],"txt2e"); }
    if (lang == 6) { name_object(Obj[19],"txt2e"); }
    }

  //Object txt2f
  if (HideObj[20] == 0)
    {
  if (lang == 0)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[20],"txt2f"); }
    if (lang == 1) { name_object(Obj[20],"txt2f"); }
    if (lang == 2) { name_object(Obj[20],"txt2f"); }
    if (lang == 3) { name_object(Obj[20],"txt2f"); }
    if (lang == 4) { name_object(Obj[20],"txt2f"); }
    if (lang == 5) { name_object(Obj[20],"txt2f"); }
    if (lang == 6) { name_object(Obj[20],"txt2f"); }
    }

  //Object txt2g
  if (HideObj[21] == 0)
    {
  if (lang == 0)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[145]+1),(y[145]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[21],"txt2g"); }
    if (lang == 1) { name_object(Obj[21],"txt2g"); }
    if (lang == 2) { name_object(Obj[21],"txt2g"); }
    if (lang == 3) { name_object(Obj[21],"txt2g"); }
    if (lang == 4) { name_object(Obj[21],"txt2g"); }
    if (lang == 5) { name_object(Obj[21],"txt2g"); }
    if (lang == 6) { name_object(Obj[21],"txt2g"); }
    }

  //Object txt2h
  if (HideObj[22] == 0)
    {
  if (lang == 0)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[4],(y[4]+1),"LINE");
    if (lang == 0) { name_object(Obj[22],"txt2h"); }
    if (lang == 1) { name_object(Obj[22],"txt2h"); }
    if (lang == 2) { name_object(Obj[22],"txt2h"); }
    if (lang == 3) { name_object(Obj[22],"txt2h"); }
    if (lang == 4) { name_object(Obj[22],"txt2h"); }
    if (lang == 5) { name_object(Obj[22],"txt2h"); }
    if (lang == 6) { name_object(Obj[22],"txt2h"); }
    }

  //Object txt2i
  if (HideObj[23] == 0)
    {
  if (lang == 0)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[23],"txt2i"); }
    if (lang == 1) { name_object(Obj[23],"txt2i"); }
    if (lang == 2) { name_object(Obj[23],"txt2i"); }
    if (lang == 3) { name_object(Obj[23],"txt2i"); }
    if (lang == 4) { name_object(Obj[23],"txt2i"); }
    if (lang == 5) { name_object(Obj[23],"txt2i"); }
    if (lang == 6) { name_object(Obj[23],"txt2i"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object  txt1c
  if (HideObj[38] == 0)
    {
  if (lang == 0)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-2),"LINE");
    if (lang == 0) { name_object(Obj[38]," txt1c"); }
    if (lang == 1) { name_object(Obj[38]," txt1c"); }
    if (lang == 2) { name_object(Obj[38]," txt1c"); }
    if (lang == 3) { name_object(Obj[38]," txt1c"); }
    if (lang == 4) { name_object(Obj[38]," txt1c"); }
    if (lang == 5) { name_object(Obj[38]," txt1c"); }
    if (lang == 6) { name_object(Obj[38]," txt1c"); }
    }

  //Object txt1d
  if (HideObj[39] == 0)
    {
  if (lang == 0)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-3),"LINE");
    if (lang == 0) { name_object(Obj[39],"txt1d"); }
    if (lang == 1) { name_object(Obj[39],"txt1d"); }
    if (lang == 2) { name_object(Obj[39],"txt1d"); }
    if (lang == 3) { name_object(Obj[39],"txt1d"); }
    if (lang == 4) { name_object(Obj[39],"txt1d"); }
    if (lang == 5) { name_object(Obj[39],"txt1d"); }
    if (lang == 6) { name_object(Obj[39],"txt1d"); }
    }

  //Object txt1e
  if (HideObj[40] == 0)
    {
  if (lang == 0)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),y[148],"LINE");
    if (lang == 0) { name_object(Obj[40],"txt1e"); }
    if (lang == 1) { name_object(Obj[40],"txt1e"); }
    if (lang == 2) { name_object(Obj[40],"txt1e"); }
    if (lang == 3) { name_object(Obj[40],"txt1e"); }
    if (lang == 4) { name_object(Obj[40],"txt1e"); }
    if (lang == 5) { name_object(Obj[40],"txt1e"); }
    if (lang == 6) { name_object(Obj[40],"txt1e"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(8, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(9, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View2()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View2");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View2Points();
  }

Flow0View2Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  }

Flow0View2Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object LowerFront
  if (HideObj[8] == 0)
    {

  Obj[8] = newobject("poly");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[4],y[4],"LINE");
  current_point=addpoint(x[147],y[147],"LINE");
  current_point=addpoint(x[146],y[146],"XARC_START");
  current_point=addpoint(x[145],y[145],"XARC_CORNER");
  current_point=addpoint(x[180],y[180],"LINE");
  current_point=addpoint(x[179],y[179],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[178],y[178],"XARC_CORNER");
  current_point=addpoint(x[177],y[177],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[176],y[176],"LINE");
  current_point=addpoint(x[175],y[175],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[174],y[174],"LINE");
  notch_type(current_point,"TAB",1);
    if (lang == 0) { name_object(Obj[8],"LowerFront"); }
    if (lang == 1) { name_object(Obj[8],"LowerFront"); }
    if (lang == 2) { name_object(Obj[8],"LowerFront"); }
    if (lang == 3) { name_object(Obj[8],"LowerFront"); }
    if (lang == 4) { name_object(Obj[8],"LowerFront"); }
    if (lang == 5) { name_object(Obj[8],"LowerFront"); }
    if (lang == 6) { name_object(Obj[8],"LowerFront"); }
    }

  //Object Lowerback
  if (HideObj[9] == 0)
    {

  Obj[9] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[181],y[181],"LINE");
  current_point=addpoint(x[182],y[182],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[183],y[183],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[184],y[184],"LINE");
  current_point=addpoint(x[185],y[185],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[186],y[186],"XARC_CORNER");
  current_point=addpoint(x[187],y[187],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[188],y[188],"XARC_START");
  current_point=addpoint(x[171],y[171],"XARC_CORNER");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[9],"Lowerback"); }
    if (lang == 1) { name_object(Obj[9],"Lowerback"); }
    if (lang == 2) { name_object(Obj[9],"Lowerback"); }
    if (lang == 3) { name_object(Obj[9],"Lowerback"); }
    if (lang == 4) { name_object(Obj[9],"Lowerback"); }
    if (lang == 5) { name_object(Obj[9],"Lowerback"); }
    if (lang == 6) { name_object(Obj[9],"Lowerback"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object txt2c
  if (HideObj[17] == 0)
    {
  if (lang == 0)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-1),"LINE");
    if (lang == 0) { name_object(Obj[17],"txt2c"); }
    if (lang == 1) { name_object(Obj[17],"txt2c"); }
    if (lang == 2) { name_object(Obj[17],"txt2c"); }
    if (lang == 3) { name_object(Obj[17],"txt2c"); }
    if (lang == 4) { name_object(Obj[17],"txt2c"); }
    if (lang == 5) { name_object(Obj[17],"txt2c"); }
    if (lang == 6) { name_object(Obj[17],"txt2c"); }
    }

  //Object txt2d
  if (HideObj[18] == 0)
    {
  if (lang == 0)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-1),"LINE");
    if (lang == 0) { name_object(Obj[18],"txt2d"); }
    if (lang == 1) { name_object(Obj[18],"txt2d"); }
    if (lang == 2) { name_object(Obj[18],"txt2d"); }
    if (lang == 3) { name_object(Obj[18],"txt2d"); }
    if (lang == 4) { name_object(Obj[18],"txt2d"); }
    if (lang == 5) { name_object(Obj[18],"txt2d"); }
    if (lang == 6) { name_object(Obj[18],"txt2d"); }
    }

  //Object txt2e
  if (HideObj[19] == 0)
    {
  if (lang == 0)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-2),"LINE");
    if (lang == 0) { name_object(Obj[19],"txt2e"); }
    if (lang == 1) { name_object(Obj[19],"txt2e"); }
    if (lang == 2) { name_object(Obj[19],"txt2e"); }
    if (lang == 3) { name_object(Obj[19],"txt2e"); }
    if (lang == 4) { name_object(Obj[19],"txt2e"); }
    if (lang == 5) { name_object(Obj[19],"txt2e"); }
    if (lang == 6) { name_object(Obj[19],"txt2e"); }
    }

  //Object txt2f
  if (HideObj[20] == 0)
    {
  if (lang == 0)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[20],"txt2f"); }
    if (lang == 1) { name_object(Obj[20],"txt2f"); }
    if (lang == 2) { name_object(Obj[20],"txt2f"); }
    if (lang == 3) { name_object(Obj[20],"txt2f"); }
    if (lang == 4) { name_object(Obj[20],"txt2f"); }
    if (lang == 5) { name_object(Obj[20],"txt2f"); }
    if (lang == 6) { name_object(Obj[20],"txt2f"); }
    }

  //Object txt2g
  if (HideObj[21] == 0)
    {
  if (lang == 0)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[145]+1),(y[145]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[21],"txt2g"); }
    if (lang == 1) { name_object(Obj[21],"txt2g"); }
    if (lang == 2) { name_object(Obj[21],"txt2g"); }
    if (lang == 3) { name_object(Obj[21],"txt2g"); }
    if (lang == 4) { name_object(Obj[21],"txt2g"); }
    if (lang == 5) { name_object(Obj[21],"txt2g"); }
    if (lang == 6) { name_object(Obj[21],"txt2g"); }
    }

  //Object txt2h
  if (HideObj[22] == 0)
    {
  if (lang == 0)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[4],(y[4]+1),"LINE");
    if (lang == 0) { name_object(Obj[22],"txt2h"); }
    if (lang == 1) { name_object(Obj[22],"txt2h"); }
    if (lang == 2) { name_object(Obj[22],"txt2h"); }
    if (lang == 3) { name_object(Obj[22],"txt2h"); }
    if (lang == 4) { name_object(Obj[22],"txt2h"); }
    if (lang == 5) { name_object(Obj[22],"txt2h"); }
    if (lang == 6) { name_object(Obj[22],"txt2h"); }
    }

  //Object txt2i
  if (HideObj[23] == 0)
    {
  if (lang == 0)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[23],"txt2i"); }
    if (lang == 1) { name_object(Obj[23],"txt2i"); }
    if (lang == 2) { name_object(Obj[23],"txt2i"); }
    if (lang == 3) { name_object(Obj[23],"txt2i"); }
    if (lang == 4) { name_object(Obj[23],"txt2i"); }
    if (lang == 5) { name_object(Obj[23],"txt2i"); }
    if (lang == 6) { name_object(Obj[23],"txt2i"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object  txt1c
  if (HideObj[38] == 0)
    {
  if (lang == 0)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-2),"LINE");
    if (lang == 0) { name_object(Obj[38]," txt1c"); }
    if (lang == 1) { name_object(Obj[38]," txt1c"); }
    if (lang == 2) { name_object(Obj[38]," txt1c"); }
    if (lang == 3) { name_object(Obj[38]," txt1c"); }
    if (lang == 4) { name_object(Obj[38]," txt1c"); }
    if (lang == 5) { name_object(Obj[38]," txt1c"); }
    if (lang == 6) { name_object(Obj[38]," txt1c"); }
    }

  //Object txt1d
  if (HideObj[39] == 0)
    {
  if (lang == 0)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-3),"LINE");
    if (lang == 0) { name_object(Obj[39],"txt1d"); }
    if (lang == 1) { name_object(Obj[39],"txt1d"); }
    if (lang == 2) { name_object(Obj[39],"txt1d"); }
    if (lang == 3) { name_object(Obj[39],"txt1d"); }
    if (lang == 4) { name_object(Obj[39],"txt1d"); }
    if (lang == 5) { name_object(Obj[39],"txt1d"); }
    if (lang == 6) { name_object(Obj[39],"txt1d"); }
    }

  //Object txt1e
  if (HideObj[40] == 0)
    {
  if (lang == 0)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),y[148],"LINE");
    if (lang == 0) { name_object(Obj[40],"txt1e"); }
    if (lang == 1) { name_object(Obj[40],"txt1e"); }
    if (lang == 2) { name_object(Obj[40],"txt1e"); }
    if (lang == 3) { name_object(Obj[40],"txt1e"); }
    if (lang == 4) { name_object(Obj[40],"txt1e"); }
    if (lang == 5) { name_object(Obj[40],"txt1e"); }
    if (lang == 6) { name_object(Obj[40],"txt1e"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(8, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(9, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View3()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View3");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View3Points();
  }

Flow0View3Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  }

Flow0View3Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object Back waist dart
  if (HideObj[2] == 0)
    {

  Obj[2] = newobject("poly");
  current_point=addpoint(x[96],y[96],"LINE");
  current_point=addpoint(x[94],y[94],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[139],y[139],"LINE");
    if (lang == 0) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 1) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 2) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 3) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 4) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 5) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 6) { name_object(Obj[2],"Back waist dart"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object LowerFront
  if (HideObj[8] == 0)
    {

  Obj[8] = newobject("poly");
  current_point=addpoint(x[98],y[98],"LINE");
  current_point=addpoint(x[136],y[136],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[166],y[166],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[51],y[51],"LINE");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[4],y[4],"LINE");
  current_point=addpoint(x[147],y[147],"LINE");
  current_point=addpoint(x[146],y[146],"LINE");
  current_point=addpoint(x[145],y[145],"LINE");
  current_point=addpoint(x[209],y[209],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[33],y[33],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[39],y[39],"XARC_CORNER");
  current_point=addpoint(x[37],y[37],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[8],"LowerFront"); }
    if (lang == 1) { name_object(Obj[8],"LowerFront"); }
    if (lang == 2) { name_object(Obj[8],"LowerFront"); }
    if (lang == 3) { name_object(Obj[8],"LowerFront"); }
    if (lang == 4) { name_object(Obj[8],"LowerFront"); }
    if (lang == 5) { name_object(Obj[8],"LowerFront"); }
    if (lang == 6) { name_object(Obj[8],"LowerFront"); }
    }

  //Object Lowerback
  if (HideObj[9] == 0)
    {

  Obj[9] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[97],y[97],"LINE");
  current_point=addpoint(x[90],y[90],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"XARC_CORNER");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[151],y[151],"LINE");
  current_point=addpoint(x[152],y[152],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[9],"Lowerback"); }
    if (lang == 1) { name_object(Obj[9],"Lowerback"); }
    if (lang == 2) { name_object(Obj[9],"Lowerback"); }
    if (lang == 3) { name_object(Obj[9],"Lowerback"); }
    if (lang == 4) { name_object(Obj[9],"Lowerback"); }
    if (lang == 5) { name_object(Obj[9],"Lowerback"); }
    if (lang == 6) { name_object(Obj[9],"Lowerback"); }
    }

  //Object LowerFrontDart
  if (HideObj[10] == 0)
    {

  Obj[10] = newobject("poly");
  current_point=addpoint(x[51],y[51],"LINE");
  current_point=addpoint(x[43],y[43],"LINE");
  current_point=addpoint(x[67],y[67],"LINE");
  current_point=addpoint(x[44],y[44],"LINE");
  current_point=addpoint(x[50],y[50],"OPEN");
    if (lang == 0) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 1) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 2) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 3) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 4) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 5) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 6) { name_object(Obj[10],"LowerFrontDart"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object SlitLine
  if (HideObj[12] == 0)
    {

  Obj[12] = newobject("poly");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[155],y[155],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[142],y[142],"OPEN");
    if (lang == 0) { name_object(Obj[12],"SlitLine"); }
    if (lang == 1) { name_object(Obj[12],"SlitLine"); }
    if (lang == 2) { name_object(Obj[12],"SlitLine"); }
    if (lang == 3) { name_object(Obj[12],"SlitLine"); }
    if (lang == 4) { name_object(Obj[12],"SlitLine"); }
    if (lang == 5) { name_object(Obj[12],"SlitLine"); }
    if (lang == 6) { name_object(Obj[12],"SlitLine"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object txt2c
  if (HideObj[17] == 0)
    {
  if (lang == 0)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-1),"LINE");
    if (lang == 0) { name_object(Obj[17],"txt2c"); }
    if (lang == 1) { name_object(Obj[17],"txt2c"); }
    if (lang == 2) { name_object(Obj[17],"txt2c"); }
    if (lang == 3) { name_object(Obj[17],"txt2c"); }
    if (lang == 4) { name_object(Obj[17],"txt2c"); }
    if (lang == 5) { name_object(Obj[17],"txt2c"); }
    if (lang == 6) { name_object(Obj[17],"txt2c"); }
    }

  //Object txt2d
  if (HideObj[18] == 0)
    {
  if (lang == 0)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-1),"LINE");
    if (lang == 0) { name_object(Obj[18],"txt2d"); }
    if (lang == 1) { name_object(Obj[18],"txt2d"); }
    if (lang == 2) { name_object(Obj[18],"txt2d"); }
    if (lang == 3) { name_object(Obj[18],"txt2d"); }
    if (lang == 4) { name_object(Obj[18],"txt2d"); }
    if (lang == 5) { name_object(Obj[18],"txt2d"); }
    if (lang == 6) { name_object(Obj[18],"txt2d"); }
    }

  //Object txt2e
  if (HideObj[19] == 0)
    {
  if (lang == 0)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-2),"LINE");
    if (lang == 0) { name_object(Obj[19],"txt2e"); }
    if (lang == 1) { name_object(Obj[19],"txt2e"); }
    if (lang == 2) { name_object(Obj[19],"txt2e"); }
    if (lang == 3) { name_object(Obj[19],"txt2e"); }
    if (lang == 4) { name_object(Obj[19],"txt2e"); }
    if (lang == 5) { name_object(Obj[19],"txt2e"); }
    if (lang == 6) { name_object(Obj[19],"txt2e"); }
    }

  //Object txt2f
  if (HideObj[20] == 0)
    {
  if (lang == 0)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[20],"txt2f"); }
    if (lang == 1) { name_object(Obj[20],"txt2f"); }
    if (lang == 2) { name_object(Obj[20],"txt2f"); }
    if (lang == 3) { name_object(Obj[20],"txt2f"); }
    if (lang == 4) { name_object(Obj[20],"txt2f"); }
    if (lang == 5) { name_object(Obj[20],"txt2f"); }
    if (lang == 6) { name_object(Obj[20],"txt2f"); }
    }

  //Object txt2g
  if (HideObj[21] == 0)
    {
  if (lang == 0)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[145]+1),(y[145]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[21],"txt2g"); }
    if (lang == 1) { name_object(Obj[21],"txt2g"); }
    if (lang == 2) { name_object(Obj[21],"txt2g"); }
    if (lang == 3) { name_object(Obj[21],"txt2g"); }
    if (lang == 4) { name_object(Obj[21],"txt2g"); }
    if (lang == 5) { name_object(Obj[21],"txt2g"); }
    if (lang == 6) { name_object(Obj[21],"txt2g"); }
    }

  //Object txt2h
  if (HideObj[22] == 0)
    {
  if (lang == 0)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[4],(y[4]+1),"LINE");
    if (lang == 0) { name_object(Obj[22],"txt2h"); }
    if (lang == 1) { name_object(Obj[22],"txt2h"); }
    if (lang == 2) { name_object(Obj[22],"txt2h"); }
    if (lang == 3) { name_object(Obj[22],"txt2h"); }
    if (lang == 4) { name_object(Obj[22],"txt2h"); }
    if (lang == 5) { name_object(Obj[22],"txt2h"); }
    if (lang == 6) { name_object(Obj[22],"txt2h"); }
    }

  //Object txt2i
  if (HideObj[23] == 0)
    {
  if (lang == 0)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[23],"txt2i"); }
    if (lang == 1) { name_object(Obj[23],"txt2i"); }
    if (lang == 2) { name_object(Obj[23],"txt2i"); }
    if (lang == 3) { name_object(Obj[23],"txt2i"); }
    if (lang == 4) { name_object(Obj[23],"txt2i"); }
    if (lang == 5) { name_object(Obj[23],"txt2i"); }
    if (lang == 6) { name_object(Obj[23],"txt2i"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object  txt1c
  if (HideObj[38] == 0)
    {
  if (lang == 0)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-2),"LINE");
    if (lang == 0) { name_object(Obj[38]," txt1c"); }
    if (lang == 1) { name_object(Obj[38]," txt1c"); }
    if (lang == 2) { name_object(Obj[38]," txt1c"); }
    if (lang == 3) { name_object(Obj[38]," txt1c"); }
    if (lang == 4) { name_object(Obj[38]," txt1c"); }
    if (lang == 5) { name_object(Obj[38]," txt1c"); }
    if (lang == 6) { name_object(Obj[38]," txt1c"); }
    }

  //Object txt1d
  if (HideObj[39] == 0)
    {
  if (lang == 0)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-3),"LINE");
    if (lang == 0) { name_object(Obj[39],"txt1d"); }
    if (lang == 1) { name_object(Obj[39],"txt1d"); }
    if (lang == 2) { name_object(Obj[39],"txt1d"); }
    if (lang == 3) { name_object(Obj[39],"txt1d"); }
    if (lang == 4) { name_object(Obj[39],"txt1d"); }
    if (lang == 5) { name_object(Obj[39],"txt1d"); }
    if (lang == 6) { name_object(Obj[39],"txt1d"); }
    }

  //Object txt1e
  if (HideObj[40] == 0)
    {
  if (lang == 0)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),y[148],"LINE");
    if (lang == 0) { name_object(Obj[40],"txt1e"); }
    if (lang == 1) { name_object(Obj[40],"txt1e"); }
    if (lang == 2) { name_object(Obj[40],"txt1e"); }
    if (lang == 3) { name_object(Obj[40],"txt1e"); }
    if (lang == 4) { name_object(Obj[40],"txt1e"); }
    if (lang == 5) { name_object(Obj[40],"txt1e"); }
    if (lang == 6) { name_object(Obj[40],"txt1e"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(8, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(9, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View4()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View4");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View4Points();
  }

Flow0View4Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  }

Flow0View4Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View5()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View5");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View5Points();
  }

Flow0View5Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  //7X1
  x[331]=x[69];
y[331]=y[69]+0.5;
  //7x2
  x[332] = x[141];
y[332] = y[331];

  }

Flow0View5Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object Back waist dart
  if (HideObj[2] == 0)
    {

  Obj[2] = newobject("poly");
  current_point=addpoint(x[96],y[96],"LINE");
  current_point=addpoint(x[94],y[94],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[139],y[139],"LINE");
    if (lang == 0) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 1) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 2) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 3) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 4) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 5) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 6) { name_object(Obj[2],"Back waist dart"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object LowerFront
  if (HideObj[8] == 0)
    {

  Obj[8] = newobject("poly");
  current_point=addpoint(x[98],y[98],"LINE");
  current_point=addpoint(x[136],y[136],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[166],y[166],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[51],y[51],"LINE");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[4],y[4],"LINE");
  current_point=addpoint(x[147],y[147],"LINE");
  current_point=addpoint(x[146],y[146],"LINE");
  current_point=addpoint(x[145],y[145],"LINE");
  current_point=addpoint(x[209],y[209],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[33],y[33],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[39],y[39],"XARC_CORNER");
  current_point=addpoint(x[37],y[37],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[8],"LowerFront"); }
    if (lang == 1) { name_object(Obj[8],"LowerFront"); }
    if (lang == 2) { name_object(Obj[8],"LowerFront"); }
    if (lang == 3) { name_object(Obj[8],"LowerFront"); }
    if (lang == 4) { name_object(Obj[8],"LowerFront"); }
    if (lang == 5) { name_object(Obj[8],"LowerFront"); }
    if (lang == 6) { name_object(Obj[8],"LowerFront"); }
    }

  //Object Lowerback
  if (HideObj[9] == 0)
    {

  Obj[9] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[97],y[97],"LINE");
  current_point=addpoint(x[90],y[90],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"XARC_CORNER");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[151],y[151],"LINE");
  current_point=addpoint(x[152],y[152],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[9],"Lowerback"); }
    if (lang == 1) { name_object(Obj[9],"Lowerback"); }
    if (lang == 2) { name_object(Obj[9],"Lowerback"); }
    if (lang == 3) { name_object(Obj[9],"Lowerback"); }
    if (lang == 4) { name_object(Obj[9],"Lowerback"); }
    if (lang == 5) { name_object(Obj[9],"Lowerback"); }
    if (lang == 6) { name_object(Obj[9],"Lowerback"); }
    }

  //Object LowerFrontDart
  if (HideObj[10] == 0)
    {

  Obj[10] = newobject("poly");
  current_point=addpoint(x[51],y[51],"LINE");
  current_point=addpoint(x[43],y[43],"LINE");
  current_point=addpoint(x[67],y[67],"LINE");
  current_point=addpoint(x[44],y[44],"LINE");
  current_point=addpoint(x[50],y[50],"OPEN");
    if (lang == 0) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 1) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 2) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 3) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 4) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 5) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 6) { name_object(Obj[10],"LowerFrontDart"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object SlitLine
  if (HideObj[12] == 0)
    {

  Obj[12] = newobject("poly");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[155],y[155],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[142],y[142],"OPEN");
    if (lang == 0) { name_object(Obj[12],"SlitLine"); }
    if (lang == 1) { name_object(Obj[12],"SlitLine"); }
    if (lang == 2) { name_object(Obj[12],"SlitLine"); }
    if (lang == 3) { name_object(Obj[12],"SlitLine"); }
    if (lang == 4) { name_object(Obj[12],"SlitLine"); }
    if (lang == 5) { name_object(Obj[12],"SlitLine"); }
    if (lang == 6) { name_object(Obj[12],"SlitLine"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object txt2c
  if (HideObj[17] == 0)
    {
  if (lang == 0)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-1),"LINE");
    if (lang == 0) { name_object(Obj[17],"txt2c"); }
    if (lang == 1) { name_object(Obj[17],"txt2c"); }
    if (lang == 2) { name_object(Obj[17],"txt2c"); }
    if (lang == 3) { name_object(Obj[17],"txt2c"); }
    if (lang == 4) { name_object(Obj[17],"txt2c"); }
    if (lang == 5) { name_object(Obj[17],"txt2c"); }
    if (lang == 6) { name_object(Obj[17],"txt2c"); }
    }

  //Object txt2d
  if (HideObj[18] == 0)
    {
  if (lang == 0)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-1),"LINE");
    if (lang == 0) { name_object(Obj[18],"txt2d"); }
    if (lang == 1) { name_object(Obj[18],"txt2d"); }
    if (lang == 2) { name_object(Obj[18],"txt2d"); }
    if (lang == 3) { name_object(Obj[18],"txt2d"); }
    if (lang == 4) { name_object(Obj[18],"txt2d"); }
    if (lang == 5) { name_object(Obj[18],"txt2d"); }
    if (lang == 6) { name_object(Obj[18],"txt2d"); }
    }

  //Object txt2e
  if (HideObj[19] == 0)
    {
  if (lang == 0)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-2),"LINE");
    if (lang == 0) { name_object(Obj[19],"txt2e"); }
    if (lang == 1) { name_object(Obj[19],"txt2e"); }
    if (lang == 2) { name_object(Obj[19],"txt2e"); }
    if (lang == 3) { name_object(Obj[19],"txt2e"); }
    if (lang == 4) { name_object(Obj[19],"txt2e"); }
    if (lang == 5) { name_object(Obj[19],"txt2e"); }
    if (lang == 6) { name_object(Obj[19],"txt2e"); }
    }

  //Object txt2f
  if (HideObj[20] == 0)
    {
  if (lang == 0)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[20],"txt2f"); }
    if (lang == 1) { name_object(Obj[20],"txt2f"); }
    if (lang == 2) { name_object(Obj[20],"txt2f"); }
    if (lang == 3) { name_object(Obj[20],"txt2f"); }
    if (lang == 4) { name_object(Obj[20],"txt2f"); }
    if (lang == 5) { name_object(Obj[20],"txt2f"); }
    if (lang == 6) { name_object(Obj[20],"txt2f"); }
    }

  //Object txt2g
  if (HideObj[21] == 0)
    {
  if (lang == 0)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[145]+1),(y[145]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[21],"txt2g"); }
    if (lang == 1) { name_object(Obj[21],"txt2g"); }
    if (lang == 2) { name_object(Obj[21],"txt2g"); }
    if (lang == 3) { name_object(Obj[21],"txt2g"); }
    if (lang == 4) { name_object(Obj[21],"txt2g"); }
    if (lang == 5) { name_object(Obj[21],"txt2g"); }
    if (lang == 6) { name_object(Obj[21],"txt2g"); }
    }

  //Object txt2h
  if (HideObj[22] == 0)
    {
  if (lang == 0)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[4],(y[4]+1),"LINE");
    if (lang == 0) { name_object(Obj[22],"txt2h"); }
    if (lang == 1) { name_object(Obj[22],"txt2h"); }
    if (lang == 2) { name_object(Obj[22],"txt2h"); }
    if (lang == 3) { name_object(Obj[22],"txt2h"); }
    if (lang == 4) { name_object(Obj[22],"txt2h"); }
    if (lang == 5) { name_object(Obj[22],"txt2h"); }
    if (lang == 6) { name_object(Obj[22],"txt2h"); }
    }

  //Object txt2i
  if (HideObj[23] == 0)
    {
  if (lang == 0)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[23],"txt2i"); }
    if (lang == 1) { name_object(Obj[23],"txt2i"); }
    if (lang == 2) { name_object(Obj[23],"txt2i"); }
    if (lang == 3) { name_object(Obj[23],"txt2i"); }
    if (lang == 4) { name_object(Obj[23],"txt2i"); }
    if (lang == 5) { name_object(Obj[23],"txt2i"); }
    if (lang == 6) { name_object(Obj[23],"txt2i"); }
    }

  //Object backband1
  if (HideObj[24] == 0)
    {

  Obj[24] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[255],y[255],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[256],y[256],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[257],y[257],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[270],y[270],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[269],y[269],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[258],y[258],"LINE");
  current_point=addpoint(x[259],y[259],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[160],y[160],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  current_point=addpoint(x[271],y[271],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
    if (lang == 0) { name_object(Obj[24],"backband1"); }
    if (lang == 1) { name_object(Obj[24],"backband1"); }
    if (lang == 2) { name_object(Obj[24],"backband1"); }
    if (lang == 3) { name_object(Obj[24],"backband1"); }
    if (lang == 4) { name_object(Obj[24],"backband1"); }
    if (lang == 5) { name_object(Obj[24],"backband1"); }
    if (lang == 6) { name_object(Obj[24],"backband1"); }
    }

  //Object frontband1
  if (HideObj[25] == 0)
    {

  Obj[25] = newobject("poly");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[163],y[163],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[44],y[44],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[244],y[244],"LINE");
  current_point=addpoint(x[245],y[245],"LINE");
  current_point=addpoint(x[246],y[246],"LINE");
  current_point=addpoint(x[267],y[267],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[268],y[268],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[239],y[239],"LINE");
  current_point=addpoint(x[240],y[240],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[241],y[241],"LINE");
  notch_type(current_point,"TAB",0);
    if (lang == 0) { name_object(Obj[25],"frontband1"); }
    if (lang == 1) { name_object(Obj[25],"frontband1"); }
    if (lang == 2) { name_object(Obj[25],"frontband1"); }
    if (lang == 3) { name_object(Obj[25],"frontband1"); }
    if (lang == 4) { name_object(Obj[25],"frontband1"); }
    if (lang == 5) { name_object(Obj[25],"frontband1"); }
    if (lang == 6) { name_object(Obj[25],"frontband1"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object topline
  if (HideObj[36] == 0)
    {

  Obj[36] = newobject("poly");
  current_point=addpoint(x[276],y[276],"LINE");
  current_point=addpoint(x[282],y[282],"LINE");
  current_point=addpoint(x[283],y[283],"OPEN");
    if (lang == 0) { name_object(Obj[36],"topline"); }
    if (lang == 1) { name_object(Obj[36],"topline"); }
    if (lang == 2) { name_object(Obj[36],"topline"); }
    if (lang == 3) { name_object(Obj[36],"topline"); }
    if (lang == 4) { name_object(Obj[36],"topline"); }
    if (lang == 5) { name_object(Obj[36],"topline"); }
    if (lang == 6) { name_object(Obj[36],"topline"); }
    }

  //Object rotateskt
  if (HideObj[37] == 0)
    {

  Obj[37] = newobject("poly");
  current_point=addpoint(x[291],y[291],"LINE");
  current_point=addpoint(x[292],y[292],"LINE");
  current_point=addpoint(x[293],y[293],"LINE");
  current_point=addpoint(x[294],y[294],"LINE");
    if (lang == 0) { name_object(Obj[37],"rotateskt"); }
    if (lang == 1) { name_object(Obj[37],"rotateskt"); }
    if (lang == 2) { name_object(Obj[37],"rotateskt"); }
    if (lang == 3) { name_object(Obj[37],"rotateskt"); }
    if (lang == 4) { name_object(Obj[37],"rotateskt"); }
    if (lang == 5) { name_object(Obj[37],"rotateskt"); }
    if (lang == 6) { name_object(Obj[37],"rotateskt"); }
    }

  //Object  txt1c
  if (HideObj[38] == 0)
    {
  if (lang == 0)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-2),"LINE");
    if (lang == 0) { name_object(Obj[38]," txt1c"); }
    if (lang == 1) { name_object(Obj[38]," txt1c"); }
    if (lang == 2) { name_object(Obj[38]," txt1c"); }
    if (lang == 3) { name_object(Obj[38]," txt1c"); }
    if (lang == 4) { name_object(Obj[38]," txt1c"); }
    if (lang == 5) { name_object(Obj[38]," txt1c"); }
    if (lang == 6) { name_object(Obj[38]," txt1c"); }
    }

  //Object txt1d
  if (HideObj[39] == 0)
    {
  if (lang == 0)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-3),"LINE");
    if (lang == 0) { name_object(Obj[39],"txt1d"); }
    if (lang == 1) { name_object(Obj[39],"txt1d"); }
    if (lang == 2) { name_object(Obj[39],"txt1d"); }
    if (lang == 3) { name_object(Obj[39],"txt1d"); }
    if (lang == 4) { name_object(Obj[39],"txt1d"); }
    if (lang == 5) { name_object(Obj[39],"txt1d"); }
    if (lang == 6) { name_object(Obj[39],"txt1d"); }
    }

  //Object txt1e
  if (HideObj[40] == 0)
    {
  if (lang == 0)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),y[148],"LINE");
    if (lang == 0) { name_object(Obj[40],"txt1e"); }
    if (lang == 1) { name_object(Obj[40],"txt1e"); }
    if (lang == 2) { name_object(Obj[40],"txt1e"); }
    if (lang == 3) { name_object(Obj[40],"txt1e"); }
    if (lang == 4) { name_object(Obj[40],"txt1e"); }
    if (lang == 5) { name_object(Obj[40],"txt1e"); }
    if (lang == 6) { name_object(Obj[40],"txt1e"); }
    }

  //Object txt5a
  if (HideObj[41] == 0)
    {
  if (lang == 0)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[3],(y[3]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[41],"txt5a"); }
    if (lang == 1) { name_object(Obj[41],"txt5a"); }
    if (lang == 2) { name_object(Obj[41],"txt5a"); }
    if (lang == 3) { name_object(Obj[41],"txt5a"); }
    if (lang == 4) { name_object(Obj[41],"txt5a"); }
    if (lang == 5) { name_object(Obj[41],"txt5a"); }
    if (lang == 6) { name_object(Obj[41],"txt5a"); }
    }

  //Object txt 5b
  if (HideObj[42] == 0)
    {
  if (lang == 0)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[42],"txt 5b"); }
    if (lang == 1) { name_object(Obj[42],"txt 5b"); }
    if (lang == 2) { name_object(Obj[42],"txt 5b"); }
    if (lang == 3) { name_object(Obj[42],"txt 5b"); }
    if (lang == 4) { name_object(Obj[42],"txt 5b"); }
    if (lang == 5) { name_object(Obj[42],"txt 5b"); }
    if (lang == 6) { name_object(Obj[42],"txt 5b"); }
    }

  //Object txt5c
  if (HideObj[43] == 0)
    {
  if (lang == 0)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),y[267],"LINE");
    if (lang == 0) { name_object(Obj[43],"txt5c"); }
    if (lang == 1) { name_object(Obj[43],"txt5c"); }
    if (lang == 2) { name_object(Obj[43],"txt5c"); }
    if (lang == 3) { name_object(Obj[43],"txt5c"); }
    if (lang == 4) { name_object(Obj[43],"txt5c"); }
    if (lang == 5) { name_object(Obj[43],"txt5c"); }
    if (lang == 6) { name_object(Obj[43],"txt5c"); }
    }

  //Object txt5d
  if (HideObj[44] == 0)
    {
  if (lang == 0)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[44],"txt5d"); }
    if (lang == 1) { name_object(Obj[44],"txt5d"); }
    if (lang == 2) { name_object(Obj[44],"txt5d"); }
    if (lang == 3) { name_object(Obj[44],"txt5d"); }
    if (lang == 4) { name_object(Obj[44],"txt5d"); }
    if (lang == 5) { name_object(Obj[44],"txt5d"); }
    if (lang == 6) { name_object(Obj[44],"txt5d"); }
    }

  //Object txt5e
  if (HideObj[45] == 0)
    {
  if (lang == 0)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[246]+1),(y[246]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[45],"txt5e"); }
    if (lang == 1) { name_object(Obj[45],"txt5e"); }
    if (lang == 2) { name_object(Obj[45],"txt5e"); }
    if (lang == 3) { name_object(Obj[45],"txt5e"); }
    if (lang == 4) { name_object(Obj[45],"txt5e"); }
    if (lang == 5) { name_object(Obj[45],"txt5e"); }
    if (lang == 6) { name_object(Obj[45],"txt5e"); }
    }

  //Object txt5g
  if (HideObj[46] == 0)
    {
  if (lang == 0)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[117],(y[117]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[46],"txt5g"); }
    if (lang == 1) { name_object(Obj[46],"txt5g"); }
    if (lang == 2) { name_object(Obj[46],"txt5g"); }
    if (lang == 3) { name_object(Obj[46],"txt5g"); }
    if (lang == 4) { name_object(Obj[46],"txt5g"); }
    if (lang == 5) { name_object(Obj[46],"txt5g"); }
    if (lang == 6) { name_object(Obj[46],"txt5g"); }
    }

  //Object txt5h
  if (HideObj[47] == 0)
    {
  if (lang == 0)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[47],"txt5h"); }
    if (lang == 1) { name_object(Obj[47],"txt5h"); }
    if (lang == 2) { name_object(Obj[47],"txt5h"); }
    if (lang == 3) { name_object(Obj[47],"txt5h"); }
    if (lang == 4) { name_object(Obj[47],"txt5h"); }
    if (lang == 5) { name_object(Obj[47],"txt5h"); }
    if (lang == 6) { name_object(Obj[47],"txt5h"); }
    }

  //Object txt5i
  if (HideObj[48] == 0)
    {
  if (lang == 0)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),y[271],"LINE");
    if (lang == 0) { name_object(Obj[48],"txt5i"); }
    if (lang == 1) { name_object(Obj[48],"txt5i"); }
    if (lang == 2) { name_object(Obj[48],"txt5i"); }
    if (lang == 3) { name_object(Obj[48],"txt5i"); }
    if (lang == 4) { name_object(Obj[48],"txt5i"); }
    if (lang == 5) { name_object(Obj[48],"txt5i"); }
    if (lang == 6) { name_object(Obj[48],"txt5i"); }
    }

  //Object txt5j
  if (HideObj[49] == 0)
    {
  if (lang == 0)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[49],"txt5j"); }
    if (lang == 1) { name_object(Obj[49],"txt5j"); }
    if (lang == 2) { name_object(Obj[49],"txt5j"); }
    if (lang == 3) { name_object(Obj[49],"txt5j"); }
    if (lang == 4) { name_object(Obj[49],"txt5j"); }
    if (lang == 5) { name_object(Obj[49],"txt5j"); }
    if (lang == 6) { name_object(Obj[49],"txt5j"); }
    }

  //Object txt5k
  if (HideObj[50] == 0)
    {
  if (lang == 0)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[69]+0.5),(y[69]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[50],"txt5k"); }
    if (lang == 1) { name_object(Obj[50],"txt5k"); }
    if (lang == 2) { name_object(Obj[50],"txt5k"); }
    if (lang == 3) { name_object(Obj[50],"txt5k"); }
    if (lang == 4) { name_object(Obj[50],"txt5k"); }
    if (lang == 5) { name_object(Obj[50],"txt5k"); }
    if (lang == 6) { name_object(Obj[50],"txt5k"); }
    }

  //Object backbandgrainline
  if (HideObj[51] == 0)
    {

  Obj[51] = newobject("poly");
  current_point=addpoint(x[141],y[141],"LINE");
  current_point=addpoint(x[332],y[332],"OPEN");
    if (lang == 0) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 1) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 2) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 3) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 4) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 5) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 6) { name_object(Obj[51],"backbandgrainline"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(8, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(9, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(24, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(25, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View6()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View6");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View6Points();
  }

Flow0View6Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  //7X1
  x[331]=x[69];
y[331]=y[69]+0.5;
  //7x2
  x[332] = x[141];
y[332] = y[331];

  }

Flow0View6Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object LowerFront
  if (HideObj[8] == 0)
    {

  Obj[8] = newobject("poly");
  current_point=addpoint(x[4],y[4],"LINE");
  current_point=addpoint(x[147],y[147],"LINE");
  current_point=addpoint(x[146],y[146],"XARC_START");
  current_point=addpoint(x[145],y[145],"XARC_CORNER");
  current_point=addpoint(x[218],y[218],"LINE");
  current_point=addpoint(x[217],y[217],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[216],y[216],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[215],y[215],"XARC_CORNER");
  current_point=addpoint(x[214],y[214],"XARC_START");
  current_point=addpoint(x[162],y[162],"XARC_CORNER");
  current_point=addpoint(x[278],y[278],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[277],y[277],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[276],y[276],"LINE");
    if (lang == 0) { name_object(Obj[8],"LowerFront"); }
    if (lang == 1) { name_object(Obj[8],"LowerFront"); }
    if (lang == 2) { name_object(Obj[8],"LowerFront"); }
    if (lang == 3) { name_object(Obj[8],"LowerFront"); }
    if (lang == 4) { name_object(Obj[8],"LowerFront"); }
    if (lang == 5) { name_object(Obj[8],"LowerFront"); }
    if (lang == 6) { name_object(Obj[8],"LowerFront"); }
    }

  //Object Lowerback
  if (HideObj[9] == 0)
    {

  Obj[9] = newobject("poly");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[272],y[272],"LINE");
  current_point=addpoint(x[273],y[273],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[274],y[274],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[275],y[275],"XARC_CORNER");
  current_point=addpoint(x[221],y[221],"XARC_START");
  current_point=addpoint(x[222],y[222],"XARC_CORNER");
  current_point=addpoint(x[223],y[223],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[224],y[224],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[225],y[225],"XARC_START");
  current_point=addpoint(x[144],y[144],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[9],"Lowerback"); }
    if (lang == 1) { name_object(Obj[9],"Lowerback"); }
    if (lang == 2) { name_object(Obj[9],"Lowerback"); }
    if (lang == 3) { name_object(Obj[9],"Lowerback"); }
    if (lang == 4) { name_object(Obj[9],"Lowerback"); }
    if (lang == 5) { name_object(Obj[9],"Lowerback"); }
    if (lang == 6) { name_object(Obj[9],"Lowerback"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object txt2c
  if (HideObj[17] == 0)
    {
  if (lang == 0)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-1),"LINE");
    if (lang == 0) { name_object(Obj[17],"txt2c"); }
    if (lang == 1) { name_object(Obj[17],"txt2c"); }
    if (lang == 2) { name_object(Obj[17],"txt2c"); }
    if (lang == 3) { name_object(Obj[17],"txt2c"); }
    if (lang == 4) { name_object(Obj[17],"txt2c"); }
    if (lang == 5) { name_object(Obj[17],"txt2c"); }
    if (lang == 6) { name_object(Obj[17],"txt2c"); }
    }

  //Object txt2d
  if (HideObj[18] == 0)
    {
  if (lang == 0)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-1),"LINE");
    if (lang == 0) { name_object(Obj[18],"txt2d"); }
    if (lang == 1) { name_object(Obj[18],"txt2d"); }
    if (lang == 2) { name_object(Obj[18],"txt2d"); }
    if (lang == 3) { name_object(Obj[18],"txt2d"); }
    if (lang == 4) { name_object(Obj[18],"txt2d"); }
    if (lang == 5) { name_object(Obj[18],"txt2d"); }
    if (lang == 6) { name_object(Obj[18],"txt2d"); }
    }

  //Object txt2e
  if (HideObj[19] == 0)
    {
  if (lang == 0)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-2),"LINE");
    if (lang == 0) { name_object(Obj[19],"txt2e"); }
    if (lang == 1) { name_object(Obj[19],"txt2e"); }
    if (lang == 2) { name_object(Obj[19],"txt2e"); }
    if (lang == 3) { name_object(Obj[19],"txt2e"); }
    if (lang == 4) { name_object(Obj[19],"txt2e"); }
    if (lang == 5) { name_object(Obj[19],"txt2e"); }
    if (lang == 6) { name_object(Obj[19],"txt2e"); }
    }

  //Object txt2f
  if (HideObj[20] == 0)
    {
  if (lang == 0)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[20],"txt2f"); }
    if (lang == 1) { name_object(Obj[20],"txt2f"); }
    if (lang == 2) { name_object(Obj[20],"txt2f"); }
    if (lang == 3) { name_object(Obj[20],"txt2f"); }
    if (lang == 4) { name_object(Obj[20],"txt2f"); }
    if (lang == 5) { name_object(Obj[20],"txt2f"); }
    if (lang == 6) { name_object(Obj[20],"txt2f"); }
    }

  //Object txt2g
  if (HideObj[21] == 0)
    {
  if (lang == 0)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[145]+1),(y[145]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[21],"txt2g"); }
    if (lang == 1) { name_object(Obj[21],"txt2g"); }
    if (lang == 2) { name_object(Obj[21],"txt2g"); }
    if (lang == 3) { name_object(Obj[21],"txt2g"); }
    if (lang == 4) { name_object(Obj[21],"txt2g"); }
    if (lang == 5) { name_object(Obj[21],"txt2g"); }
    if (lang == 6) { name_object(Obj[21],"txt2g"); }
    }

  //Object txt2h
  if (HideObj[22] == 0)
    {
  if (lang == 0)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[4],(y[4]+1),"LINE");
    if (lang == 0) { name_object(Obj[22],"txt2h"); }
    if (lang == 1) { name_object(Obj[22],"txt2h"); }
    if (lang == 2) { name_object(Obj[22],"txt2h"); }
    if (lang == 3) { name_object(Obj[22],"txt2h"); }
    if (lang == 4) { name_object(Obj[22],"txt2h"); }
    if (lang == 5) { name_object(Obj[22],"txt2h"); }
    if (lang == 6) { name_object(Obj[22],"txt2h"); }
    }

  //Object txt2i
  if (HideObj[23] == 0)
    {
  if (lang == 0)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[23],"txt2i"); }
    if (lang == 1) { name_object(Obj[23],"txt2i"); }
    if (lang == 2) { name_object(Obj[23],"txt2i"); }
    if (lang == 3) { name_object(Obj[23],"txt2i"); }
    if (lang == 4) { name_object(Obj[23],"txt2i"); }
    if (lang == 5) { name_object(Obj[23],"txt2i"); }
    if (lang == 6) { name_object(Obj[23],"txt2i"); }
    }

  //Object backband1
  if (HideObj[24] == 0)
    {

  Obj[24] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[255],y[255],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[256],y[256],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[257],y[257],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[270],y[270],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[269],y[269],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[258],y[258],"LINE");
  current_point=addpoint(x[259],y[259],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[160],y[160],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  current_point=addpoint(x[271],y[271],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
    if (lang == 0) { name_object(Obj[24],"backband1"); }
    if (lang == 1) { name_object(Obj[24],"backband1"); }
    if (lang == 2) { name_object(Obj[24],"backband1"); }
    if (lang == 3) { name_object(Obj[24],"backband1"); }
    if (lang == 4) { name_object(Obj[24],"backband1"); }
    if (lang == 5) { name_object(Obj[24],"backband1"); }
    if (lang == 6) { name_object(Obj[24],"backband1"); }
    }

  //Object frontband1
  if (HideObj[25] == 0)
    {

  Obj[25] = newobject("poly");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[163],y[163],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[44],y[44],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[244],y[244],"LINE");
  current_point=addpoint(x[245],y[245],"LINE");
  current_point=addpoint(x[246],y[246],"LINE");
  current_point=addpoint(x[267],y[267],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[268],y[268],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[239],y[239],"LINE");
  current_point=addpoint(x[240],y[240],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[241],y[241],"LINE");
  notch_type(current_point,"TAB",0);
    if (lang == 0) { name_object(Obj[25],"frontband1"); }
    if (lang == 1) { name_object(Obj[25],"frontband1"); }
    if (lang == 2) { name_object(Obj[25],"frontband1"); }
    if (lang == 3) { name_object(Obj[25],"frontband1"); }
    if (lang == 4) { name_object(Obj[25],"frontband1"); }
    if (lang == 5) { name_object(Obj[25],"frontband1"); }
    if (lang == 6) { name_object(Obj[25],"frontband1"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object  txt1c
  if (HideObj[38] == 0)
    {
  if (lang == 0)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-2),"LINE");
    if (lang == 0) { name_object(Obj[38]," txt1c"); }
    if (lang == 1) { name_object(Obj[38]," txt1c"); }
    if (lang == 2) { name_object(Obj[38]," txt1c"); }
    if (lang == 3) { name_object(Obj[38]," txt1c"); }
    if (lang == 4) { name_object(Obj[38]," txt1c"); }
    if (lang == 5) { name_object(Obj[38]," txt1c"); }
    if (lang == 6) { name_object(Obj[38]," txt1c"); }
    }

  //Object txt1d
  if (HideObj[39] == 0)
    {
  if (lang == 0)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-3),"LINE");
    if (lang == 0) { name_object(Obj[39],"txt1d"); }
    if (lang == 1) { name_object(Obj[39],"txt1d"); }
    if (lang == 2) { name_object(Obj[39],"txt1d"); }
    if (lang == 3) { name_object(Obj[39],"txt1d"); }
    if (lang == 4) { name_object(Obj[39],"txt1d"); }
    if (lang == 5) { name_object(Obj[39],"txt1d"); }
    if (lang == 6) { name_object(Obj[39],"txt1d"); }
    }

  //Object txt1e
  if (HideObj[40] == 0)
    {
  if (lang == 0)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),y[148],"LINE");
    if (lang == 0) { name_object(Obj[40],"txt1e"); }
    if (lang == 1) { name_object(Obj[40],"txt1e"); }
    if (lang == 2) { name_object(Obj[40],"txt1e"); }
    if (lang == 3) { name_object(Obj[40],"txt1e"); }
    if (lang == 4) { name_object(Obj[40],"txt1e"); }
    if (lang == 5) { name_object(Obj[40],"txt1e"); }
    if (lang == 6) { name_object(Obj[40],"txt1e"); }
    }

  //Object txt5a
  if (HideObj[41] == 0)
    {
  if (lang == 0)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[3],(y[3]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[41],"txt5a"); }
    if (lang == 1) { name_object(Obj[41],"txt5a"); }
    if (lang == 2) { name_object(Obj[41],"txt5a"); }
    if (lang == 3) { name_object(Obj[41],"txt5a"); }
    if (lang == 4) { name_object(Obj[41],"txt5a"); }
    if (lang == 5) { name_object(Obj[41],"txt5a"); }
    if (lang == 6) { name_object(Obj[41],"txt5a"); }
    }

  //Object txt 5b
  if (HideObj[42] == 0)
    {
  if (lang == 0)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[42],"txt 5b"); }
    if (lang == 1) { name_object(Obj[42],"txt 5b"); }
    if (lang == 2) { name_object(Obj[42],"txt 5b"); }
    if (lang == 3) { name_object(Obj[42],"txt 5b"); }
    if (lang == 4) { name_object(Obj[42],"txt 5b"); }
    if (lang == 5) { name_object(Obj[42],"txt 5b"); }
    if (lang == 6) { name_object(Obj[42],"txt 5b"); }
    }

  //Object txt5c
  if (HideObj[43] == 0)
    {
  if (lang == 0)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),y[267],"LINE");
    if (lang == 0) { name_object(Obj[43],"txt5c"); }
    if (lang == 1) { name_object(Obj[43],"txt5c"); }
    if (lang == 2) { name_object(Obj[43],"txt5c"); }
    if (lang == 3) { name_object(Obj[43],"txt5c"); }
    if (lang == 4) { name_object(Obj[43],"txt5c"); }
    if (lang == 5) { name_object(Obj[43],"txt5c"); }
    if (lang == 6) { name_object(Obj[43],"txt5c"); }
    }

  //Object txt5d
  if (HideObj[44] == 0)
    {
  if (lang == 0)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[44],"txt5d"); }
    if (lang == 1) { name_object(Obj[44],"txt5d"); }
    if (lang == 2) { name_object(Obj[44],"txt5d"); }
    if (lang == 3) { name_object(Obj[44],"txt5d"); }
    if (lang == 4) { name_object(Obj[44],"txt5d"); }
    if (lang == 5) { name_object(Obj[44],"txt5d"); }
    if (lang == 6) { name_object(Obj[44],"txt5d"); }
    }

  //Object txt5e
  if (HideObj[45] == 0)
    {
  if (lang == 0)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[246]+1),(y[246]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[45],"txt5e"); }
    if (lang == 1) { name_object(Obj[45],"txt5e"); }
    if (lang == 2) { name_object(Obj[45],"txt5e"); }
    if (lang == 3) { name_object(Obj[45],"txt5e"); }
    if (lang == 4) { name_object(Obj[45],"txt5e"); }
    if (lang == 5) { name_object(Obj[45],"txt5e"); }
    if (lang == 6) { name_object(Obj[45],"txt5e"); }
    }

  //Object txt5g
  if (HideObj[46] == 0)
    {
  if (lang == 0)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[117],(y[117]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[46],"txt5g"); }
    if (lang == 1) { name_object(Obj[46],"txt5g"); }
    if (lang == 2) { name_object(Obj[46],"txt5g"); }
    if (lang == 3) { name_object(Obj[46],"txt5g"); }
    if (lang == 4) { name_object(Obj[46],"txt5g"); }
    if (lang == 5) { name_object(Obj[46],"txt5g"); }
    if (lang == 6) { name_object(Obj[46],"txt5g"); }
    }

  //Object txt5h
  if (HideObj[47] == 0)
    {
  if (lang == 0)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[47],"txt5h"); }
    if (lang == 1) { name_object(Obj[47],"txt5h"); }
    if (lang == 2) { name_object(Obj[47],"txt5h"); }
    if (lang == 3) { name_object(Obj[47],"txt5h"); }
    if (lang == 4) { name_object(Obj[47],"txt5h"); }
    if (lang == 5) { name_object(Obj[47],"txt5h"); }
    if (lang == 6) { name_object(Obj[47],"txt5h"); }
    }

  //Object txt5i
  if (HideObj[48] == 0)
    {
  if (lang == 0)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),y[271],"LINE");
    if (lang == 0) { name_object(Obj[48],"txt5i"); }
    if (lang == 1) { name_object(Obj[48],"txt5i"); }
    if (lang == 2) { name_object(Obj[48],"txt5i"); }
    if (lang == 3) { name_object(Obj[48],"txt5i"); }
    if (lang == 4) { name_object(Obj[48],"txt5i"); }
    if (lang == 5) { name_object(Obj[48],"txt5i"); }
    if (lang == 6) { name_object(Obj[48],"txt5i"); }
    }

  //Object txt5j
  if (HideObj[49] == 0)
    {
  if (lang == 0)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[49],"txt5j"); }
    if (lang == 1) { name_object(Obj[49],"txt5j"); }
    if (lang == 2) { name_object(Obj[49],"txt5j"); }
    if (lang == 3) { name_object(Obj[49],"txt5j"); }
    if (lang == 4) { name_object(Obj[49],"txt5j"); }
    if (lang == 5) { name_object(Obj[49],"txt5j"); }
    if (lang == 6) { name_object(Obj[49],"txt5j"); }
    }

  //Object txt5k
  if (HideObj[50] == 0)
    {
  if (lang == 0)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[69]+0.5),(y[69]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[50],"txt5k"); }
    if (lang == 1) { name_object(Obj[50],"txt5k"); }
    if (lang == 2) { name_object(Obj[50],"txt5k"); }
    if (lang == 3) { name_object(Obj[50],"txt5k"); }
    if (lang == 4) { name_object(Obj[50],"txt5k"); }
    if (lang == 5) { name_object(Obj[50],"txt5k"); }
    if (lang == 6) { name_object(Obj[50],"txt5k"); }
    }

  //Object backbandgrainline
  if (HideObj[51] == 0)
    {

  Obj[51] = newobject("poly");
  current_point=addpoint(x[141],y[141],"LINE");
  current_point=addpoint(x[332],y[332],"OPEN");
    if (lang == 0) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 1) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 2) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 3) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 4) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 5) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 6) { name_object(Obj[51],"backbandgrainline"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(8, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(9, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(24, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(25, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View7()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View7");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View7Points();
  }

Flow0View7Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  //7X1
  x[331]=x[69];
y[331]=y[69]+0.5;
  //7x2
  x[332] = x[141];
y[332] = y[331];

  }

Flow0View7Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object Back waist dart
  if (HideObj[2] == 0)
    {

  Obj[2] = newobject("poly");
  current_point=addpoint(x[275],y[275],"LINE");
  current_point=addpoint(x[94],y[94],"LINE");
  current_point=addpoint(x[274],y[274],"OPEN");
    if (lang == 0) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 1) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 2) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 3) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 4) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 5) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 6) { name_object(Obj[2],"Back waist dart"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object LowerFront
  if (HideObj[8] == 0)
    {

  Obj[8] = newobject("poly");
  current_point=addpoint(x[276],y[276],"LINE");
  current_point=addpoint(x[4],y[4],"LINE");
  current_point=addpoint(x[147],y[147],"LINE");
  current_point=addpoint(x[146],y[146],"LINE");
  current_point=addpoint(x[145],y[145],"LINE");
  current_point=addpoint(x[209],y[209],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[33],y[33],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[39],y[39],"XARC_CORNER");
  current_point=addpoint(x[37],y[37],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[281],y[281],"XARC_CORNER");
  current_point=addpoint(x[279],y[279],"LINE");
  current_point=addpoint(x[278],y[278],"LINE");
  current_point=addpoint(x[277],y[277],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[8],"LowerFront"); }
    if (lang == 1) { name_object(Obj[8],"LowerFront"); }
    if (lang == 2) { name_object(Obj[8],"LowerFront"); }
    if (lang == 3) { name_object(Obj[8],"LowerFront"); }
    if (lang == 4) { name_object(Obj[8],"LowerFront"); }
    if (lang == 5) { name_object(Obj[8],"LowerFront"); }
    if (lang == 6) { name_object(Obj[8],"LowerFront"); }
    }

  //Object Lowerback
  if (HideObj[9] == 0)
    {

  Obj[9] = newobject("poly");
  current_point=addpoint(x[90],y[90],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"XARC_CORNER");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[151],y[151],"LINE");
  current_point=addpoint(x[152],y[152],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[272],y[272],"LINE");
  current_point=addpoint(x[273],y[273],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[274],y[274],"LINE");
  current_point=addpoint(x[275],y[275],"XARC_START");
  current_point=addpoint(x[280],y[280],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[9],"Lowerback"); }
    if (lang == 1) { name_object(Obj[9],"Lowerback"); }
    if (lang == 2) { name_object(Obj[9],"Lowerback"); }
    if (lang == 3) { name_object(Obj[9],"Lowerback"); }
    if (lang == 4) { name_object(Obj[9],"Lowerback"); }
    if (lang == 5) { name_object(Obj[9],"Lowerback"); }
    if (lang == 6) { name_object(Obj[9],"Lowerback"); }
    }

  //Object LowerFrontDart
  if (HideObj[10] == 0)
    {

  Obj[10] = newobject("poly");
  current_point=addpoint(x[278],y[278],"LINE");
  current_point=addpoint(x[67],y[67],"LINE");
  current_point=addpoint(x[279],y[279],"OPEN");
    if (lang == 0) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 1) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 2) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 3) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 4) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 5) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 6) { name_object(Obj[10],"LowerFrontDart"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object SlitLine
  if (HideObj[12] == 0)
    {

  Obj[12] = newobject("poly");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[155],y[155],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[142],y[142],"OPEN");
    if (lang == 0) { name_object(Obj[12],"SlitLine"); }
    if (lang == 1) { name_object(Obj[12],"SlitLine"); }
    if (lang == 2) { name_object(Obj[12],"SlitLine"); }
    if (lang == 3) { name_object(Obj[12],"SlitLine"); }
    if (lang == 4) { name_object(Obj[12],"SlitLine"); }
    if (lang == 5) { name_object(Obj[12],"SlitLine"); }
    if (lang == 6) { name_object(Obj[12],"SlitLine"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object txt2c
  if (HideObj[17] == 0)
    {
  if (lang == 0)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-1),"LINE");
    if (lang == 0) { name_object(Obj[17],"txt2c"); }
    if (lang == 1) { name_object(Obj[17],"txt2c"); }
    if (lang == 2) { name_object(Obj[17],"txt2c"); }
    if (lang == 3) { name_object(Obj[17],"txt2c"); }
    if (lang == 4) { name_object(Obj[17],"txt2c"); }
    if (lang == 5) { name_object(Obj[17],"txt2c"); }
    if (lang == 6) { name_object(Obj[17],"txt2c"); }
    }

  //Object txt2d
  if (HideObj[18] == 0)
    {
  if (lang == 0)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-1),"LINE");
    if (lang == 0) { name_object(Obj[18],"txt2d"); }
    if (lang == 1) { name_object(Obj[18],"txt2d"); }
    if (lang == 2) { name_object(Obj[18],"txt2d"); }
    if (lang == 3) { name_object(Obj[18],"txt2d"); }
    if (lang == 4) { name_object(Obj[18],"txt2d"); }
    if (lang == 5) { name_object(Obj[18],"txt2d"); }
    if (lang == 6) { name_object(Obj[18],"txt2d"); }
    }

  //Object txt2e
  if (HideObj[19] == 0)
    {
  if (lang == 0)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-2),"LINE");
    if (lang == 0) { name_object(Obj[19],"txt2e"); }
    if (lang == 1) { name_object(Obj[19],"txt2e"); }
    if (lang == 2) { name_object(Obj[19],"txt2e"); }
    if (lang == 3) { name_object(Obj[19],"txt2e"); }
    if (lang == 4) { name_object(Obj[19],"txt2e"); }
    if (lang == 5) { name_object(Obj[19],"txt2e"); }
    if (lang == 6) { name_object(Obj[19],"txt2e"); }
    }

  //Object txt2f
  if (HideObj[20] == 0)
    {
  if (lang == 0)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[20],"txt2f"); }
    if (lang == 1) { name_object(Obj[20],"txt2f"); }
    if (lang == 2) { name_object(Obj[20],"txt2f"); }
    if (lang == 3) { name_object(Obj[20],"txt2f"); }
    if (lang == 4) { name_object(Obj[20],"txt2f"); }
    if (lang == 5) { name_object(Obj[20],"txt2f"); }
    if (lang == 6) { name_object(Obj[20],"txt2f"); }
    }

  //Object txt2g
  if (HideObj[21] == 0)
    {
  if (lang == 0)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[145]+1),(y[145]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[21],"txt2g"); }
    if (lang == 1) { name_object(Obj[21],"txt2g"); }
    if (lang == 2) { name_object(Obj[21],"txt2g"); }
    if (lang == 3) { name_object(Obj[21],"txt2g"); }
    if (lang == 4) { name_object(Obj[21],"txt2g"); }
    if (lang == 5) { name_object(Obj[21],"txt2g"); }
    if (lang == 6) { name_object(Obj[21],"txt2g"); }
    }

  //Object txt2h
  if (HideObj[22] == 0)
    {
  if (lang == 0)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[4],(y[4]+1),"LINE");
    if (lang == 0) { name_object(Obj[22],"txt2h"); }
    if (lang == 1) { name_object(Obj[22],"txt2h"); }
    if (lang == 2) { name_object(Obj[22],"txt2h"); }
    if (lang == 3) { name_object(Obj[22],"txt2h"); }
    if (lang == 4) { name_object(Obj[22],"txt2h"); }
    if (lang == 5) { name_object(Obj[22],"txt2h"); }
    if (lang == 6) { name_object(Obj[22],"txt2h"); }
    }

  //Object txt2i
  if (HideObj[23] == 0)
    {
  if (lang == 0)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[23],"txt2i"); }
    if (lang == 1) { name_object(Obj[23],"txt2i"); }
    if (lang == 2) { name_object(Obj[23],"txt2i"); }
    if (lang == 3) { name_object(Obj[23],"txt2i"); }
    if (lang == 4) { name_object(Obj[23],"txt2i"); }
    if (lang == 5) { name_object(Obj[23],"txt2i"); }
    if (lang == 6) { name_object(Obj[23],"txt2i"); }
    }

  //Object backband1
  if (HideObj[24] == 0)
    {

  Obj[24] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[255],y[255],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[256],y[256],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[257],y[257],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[270],y[270],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[269],y[269],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[258],y[258],"LINE");
  current_point=addpoint(x[259],y[259],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[160],y[160],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  current_point=addpoint(x[271],y[271],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
    if (lang == 0) { name_object(Obj[24],"backband1"); }
    if (lang == 1) { name_object(Obj[24],"backband1"); }
    if (lang == 2) { name_object(Obj[24],"backband1"); }
    if (lang == 3) { name_object(Obj[24],"backband1"); }
    if (lang == 4) { name_object(Obj[24],"backband1"); }
    if (lang == 5) { name_object(Obj[24],"backband1"); }
    if (lang == 6) { name_object(Obj[24],"backband1"); }
    }

  //Object frontband1
  if (HideObj[25] == 0)
    {

  Obj[25] = newobject("poly");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[163],y[163],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[44],y[44],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[244],y[244],"LINE");
  current_point=addpoint(x[245],y[245],"LINE");
  current_point=addpoint(x[246],y[246],"LINE");
  current_point=addpoint(x[267],y[267],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[268],y[268],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[239],y[239],"LINE");
  current_point=addpoint(x[240],y[240],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[241],y[241],"LINE");
  notch_type(current_point,"TAB",0);
    if (lang == 0) { name_object(Obj[25],"frontband1"); }
    if (lang == 1) { name_object(Obj[25],"frontband1"); }
    if (lang == 2) { name_object(Obj[25],"frontband1"); }
    if (lang == 3) { name_object(Obj[25],"frontband1"); }
    if (lang == 4) { name_object(Obj[25],"frontband1"); }
    if (lang == 5) { name_object(Obj[25],"frontband1"); }
    if (lang == 6) { name_object(Obj[25],"frontband1"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object  txt1c
  if (HideObj[38] == 0)
    {
  if (lang == 0)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-2),"LINE");
    if (lang == 0) { name_object(Obj[38]," txt1c"); }
    if (lang == 1) { name_object(Obj[38]," txt1c"); }
    if (lang == 2) { name_object(Obj[38]," txt1c"); }
    if (lang == 3) { name_object(Obj[38]," txt1c"); }
    if (lang == 4) { name_object(Obj[38]," txt1c"); }
    if (lang == 5) { name_object(Obj[38]," txt1c"); }
    if (lang == 6) { name_object(Obj[38]," txt1c"); }
    }

  //Object txt1d
  if (HideObj[39] == 0)
    {
  if (lang == 0)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-3),"LINE");
    if (lang == 0) { name_object(Obj[39],"txt1d"); }
    if (lang == 1) { name_object(Obj[39],"txt1d"); }
    if (lang == 2) { name_object(Obj[39],"txt1d"); }
    if (lang == 3) { name_object(Obj[39],"txt1d"); }
    if (lang == 4) { name_object(Obj[39],"txt1d"); }
    if (lang == 5) { name_object(Obj[39],"txt1d"); }
    if (lang == 6) { name_object(Obj[39],"txt1d"); }
    }

  //Object txt1e
  if (HideObj[40] == 0)
    {
  if (lang == 0)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),y[148],"LINE");
    if (lang == 0) { name_object(Obj[40],"txt1e"); }
    if (lang == 1) { name_object(Obj[40],"txt1e"); }
    if (lang == 2) { name_object(Obj[40],"txt1e"); }
    if (lang == 3) { name_object(Obj[40],"txt1e"); }
    if (lang == 4) { name_object(Obj[40],"txt1e"); }
    if (lang == 5) { name_object(Obj[40],"txt1e"); }
    if (lang == 6) { name_object(Obj[40],"txt1e"); }
    }

  //Object txt5a
  if (HideObj[41] == 0)
    {
  if (lang == 0)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[3],(y[3]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[41],"txt5a"); }
    if (lang == 1) { name_object(Obj[41],"txt5a"); }
    if (lang == 2) { name_object(Obj[41],"txt5a"); }
    if (lang == 3) { name_object(Obj[41],"txt5a"); }
    if (lang == 4) { name_object(Obj[41],"txt5a"); }
    if (lang == 5) { name_object(Obj[41],"txt5a"); }
    if (lang == 6) { name_object(Obj[41],"txt5a"); }
    }

  //Object txt 5b
  if (HideObj[42] == 0)
    {
  if (lang == 0)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[42],"txt 5b"); }
    if (lang == 1) { name_object(Obj[42],"txt 5b"); }
    if (lang == 2) { name_object(Obj[42],"txt 5b"); }
    if (lang == 3) { name_object(Obj[42],"txt 5b"); }
    if (lang == 4) { name_object(Obj[42],"txt 5b"); }
    if (lang == 5) { name_object(Obj[42],"txt 5b"); }
    if (lang == 6) { name_object(Obj[42],"txt 5b"); }
    }

  //Object txt5c
  if (HideObj[43] == 0)
    {
  if (lang == 0)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),y[267],"LINE");
    if (lang == 0) { name_object(Obj[43],"txt5c"); }
    if (lang == 1) { name_object(Obj[43],"txt5c"); }
    if (lang == 2) { name_object(Obj[43],"txt5c"); }
    if (lang == 3) { name_object(Obj[43],"txt5c"); }
    if (lang == 4) { name_object(Obj[43],"txt5c"); }
    if (lang == 5) { name_object(Obj[43],"txt5c"); }
    if (lang == 6) { name_object(Obj[43],"txt5c"); }
    }

  //Object txt5d
  if (HideObj[44] == 0)
    {
  if (lang == 0)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[44],"txt5d"); }
    if (lang == 1) { name_object(Obj[44],"txt5d"); }
    if (lang == 2) { name_object(Obj[44],"txt5d"); }
    if (lang == 3) { name_object(Obj[44],"txt5d"); }
    if (lang == 4) { name_object(Obj[44],"txt5d"); }
    if (lang == 5) { name_object(Obj[44],"txt5d"); }
    if (lang == 6) { name_object(Obj[44],"txt5d"); }
    }

  //Object txt5e
  if (HideObj[45] == 0)
    {
  if (lang == 0)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[246]+1),(y[246]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[45],"txt5e"); }
    if (lang == 1) { name_object(Obj[45],"txt5e"); }
    if (lang == 2) { name_object(Obj[45],"txt5e"); }
    if (lang == 3) { name_object(Obj[45],"txt5e"); }
    if (lang == 4) { name_object(Obj[45],"txt5e"); }
    if (lang == 5) { name_object(Obj[45],"txt5e"); }
    if (lang == 6) { name_object(Obj[45],"txt5e"); }
    }

  //Object txt5g
  if (HideObj[46] == 0)
    {
  if (lang == 0)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[117],(y[117]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[46],"txt5g"); }
    if (lang == 1) { name_object(Obj[46],"txt5g"); }
    if (lang == 2) { name_object(Obj[46],"txt5g"); }
    if (lang == 3) { name_object(Obj[46],"txt5g"); }
    if (lang == 4) { name_object(Obj[46],"txt5g"); }
    if (lang == 5) { name_object(Obj[46],"txt5g"); }
    if (lang == 6) { name_object(Obj[46],"txt5g"); }
    }

  //Object txt5h
  if (HideObj[47] == 0)
    {
  if (lang == 0)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[47],"txt5h"); }
    if (lang == 1) { name_object(Obj[47],"txt5h"); }
    if (lang == 2) { name_object(Obj[47],"txt5h"); }
    if (lang == 3) { name_object(Obj[47],"txt5h"); }
    if (lang == 4) { name_object(Obj[47],"txt5h"); }
    if (lang == 5) { name_object(Obj[47],"txt5h"); }
    if (lang == 6) { name_object(Obj[47],"txt5h"); }
    }

  //Object txt5i
  if (HideObj[48] == 0)
    {
  if (lang == 0)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),y[271],"LINE");
    if (lang == 0) { name_object(Obj[48],"txt5i"); }
    if (lang == 1) { name_object(Obj[48],"txt5i"); }
    if (lang == 2) { name_object(Obj[48],"txt5i"); }
    if (lang == 3) { name_object(Obj[48],"txt5i"); }
    if (lang == 4) { name_object(Obj[48],"txt5i"); }
    if (lang == 5) { name_object(Obj[48],"txt5i"); }
    if (lang == 6) { name_object(Obj[48],"txt5i"); }
    }

  //Object txt5j
  if (HideObj[49] == 0)
    {
  if (lang == 0)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[49],"txt5j"); }
    if (lang == 1) { name_object(Obj[49],"txt5j"); }
    if (lang == 2) { name_object(Obj[49],"txt5j"); }
    if (lang == 3) { name_object(Obj[49],"txt5j"); }
    if (lang == 4) { name_object(Obj[49],"txt5j"); }
    if (lang == 5) { name_object(Obj[49],"txt5j"); }
    if (lang == 6) { name_object(Obj[49],"txt5j"); }
    }

  //Object txt5k
  if (HideObj[50] == 0)
    {
  if (lang == 0)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[69]+0.5),(y[69]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[50],"txt5k"); }
    if (lang == 1) { name_object(Obj[50],"txt5k"); }
    if (lang == 2) { name_object(Obj[50],"txt5k"); }
    if (lang == 3) { name_object(Obj[50],"txt5k"); }
    if (lang == 4) { name_object(Obj[50],"txt5k"); }
    if (lang == 5) { name_object(Obj[50],"txt5k"); }
    if (lang == 6) { name_object(Obj[50],"txt5k"); }
    }

  //Object backbandgrainline
  if (HideObj[51] == 0)
    {

  Obj[51] = newobject("poly");
  current_point=addpoint(x[141],y[141],"LINE");
  current_point=addpoint(x[332],y[332],"OPEN");
    if (lang == 0) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 1) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 2) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 3) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 4) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 5) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 6) { name_object(Obj[51],"backbandgrainline"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(8, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(9, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(24, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(25, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View8()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View8");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View8Points();
  }

Flow0View8Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  //7X1
  x[331]=x[69];
y[331]=y[69]+0.5;
  //7x2
  x[332] = x[141];
y[332] = y[331];

  }

Flow0View8Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object backband1
  if (HideObj[24] == 0)
    {

  Obj[24] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[255],y[255],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[256],y[256],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[257],y[257],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[270],y[270],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[269],y[269],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[258],y[258],"LINE");
  current_point=addpoint(x[259],y[259],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[160],y[160],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  current_point=addpoint(x[271],y[271],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
    if (lang == 0) { name_object(Obj[24],"backband1"); }
    if (lang == 1) { name_object(Obj[24],"backband1"); }
    if (lang == 2) { name_object(Obj[24],"backband1"); }
    if (lang == 3) { name_object(Obj[24],"backband1"); }
    if (lang == 4) { name_object(Obj[24],"backband1"); }
    if (lang == 5) { name_object(Obj[24],"backband1"); }
    if (lang == 6) { name_object(Obj[24],"backband1"); }
    }

  //Object frontband1
  if (HideObj[25] == 0)
    {

  Obj[25] = newobject("poly");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[163],y[163],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[44],y[44],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[244],y[244],"LINE");
  current_point=addpoint(x[245],y[245],"LINE");
  current_point=addpoint(x[246],y[246],"LINE");
  current_point=addpoint(x[267],y[267],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[268],y[268],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[239],y[239],"LINE");
  current_point=addpoint(x[240],y[240],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[241],y[241],"LINE");
  notch_type(current_point,"TAB",0);
    if (lang == 0) { name_object(Obj[25],"frontband1"); }
    if (lang == 1) { name_object(Obj[25],"frontband1"); }
    if (lang == 2) { name_object(Obj[25],"frontband1"); }
    if (lang == 3) { name_object(Obj[25],"frontband1"); }
    if (lang == 4) { name_object(Obj[25],"frontband1"); }
    if (lang == 5) { name_object(Obj[25],"frontband1"); }
    if (lang == 6) { name_object(Obj[25],"frontband1"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object cfgrainline
  if (HideObj[33] == 0)
    {

  Obj[33] = newobject("poly");
  current_point=addpoint(x[326],y[326],"LINE");
  current_point=addpoint(x[327],y[327],"LINE");
  current_point=addpoint(x[328],y[328],"OPEN");
    if (lang == 0) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 1) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 2) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 3) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 4) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 5) { name_object(Obj[33],"cfgrainline"); }
    if (lang == 6) { name_object(Obj[33],"cfgrainline"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object txt5a
  if (HideObj[41] == 0)
    {
  if (lang == 0)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[3],(y[3]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[41],"txt5a"); }
    if (lang == 1) { name_object(Obj[41],"txt5a"); }
    if (lang == 2) { name_object(Obj[41],"txt5a"); }
    if (lang == 3) { name_object(Obj[41],"txt5a"); }
    if (lang == 4) { name_object(Obj[41],"txt5a"); }
    if (lang == 5) { name_object(Obj[41],"txt5a"); }
    if (lang == 6) { name_object(Obj[41],"txt5a"); }
    }

  //Object txt 5b
  if (HideObj[42] == 0)
    {
  if (lang == 0)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[42],"txt 5b"); }
    if (lang == 1) { name_object(Obj[42],"txt 5b"); }
    if (lang == 2) { name_object(Obj[42],"txt 5b"); }
    if (lang == 3) { name_object(Obj[42],"txt 5b"); }
    if (lang == 4) { name_object(Obj[42],"txt 5b"); }
    if (lang == 5) { name_object(Obj[42],"txt 5b"); }
    if (lang == 6) { name_object(Obj[42],"txt 5b"); }
    }

  //Object txt5c
  if (HideObj[43] == 0)
    {
  if (lang == 0)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),y[267],"LINE");
    if (lang == 0) { name_object(Obj[43],"txt5c"); }
    if (lang == 1) { name_object(Obj[43],"txt5c"); }
    if (lang == 2) { name_object(Obj[43],"txt5c"); }
    if (lang == 3) { name_object(Obj[43],"txt5c"); }
    if (lang == 4) { name_object(Obj[43],"txt5c"); }
    if (lang == 5) { name_object(Obj[43],"txt5c"); }
    if (lang == 6) { name_object(Obj[43],"txt5c"); }
    }

  //Object txt5d
  if (HideObj[44] == 0)
    {
  if (lang == 0)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[44],"txt5d"); }
    if (lang == 1) { name_object(Obj[44],"txt5d"); }
    if (lang == 2) { name_object(Obj[44],"txt5d"); }
    if (lang == 3) { name_object(Obj[44],"txt5d"); }
    if (lang == 4) { name_object(Obj[44],"txt5d"); }
    if (lang == 5) { name_object(Obj[44],"txt5d"); }
    if (lang == 6) { name_object(Obj[44],"txt5d"); }
    }

  //Object txt5e
  if (HideObj[45] == 0)
    {
  if (lang == 0)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[246]+1),(y[246]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[45],"txt5e"); }
    if (lang == 1) { name_object(Obj[45],"txt5e"); }
    if (lang == 2) { name_object(Obj[45],"txt5e"); }
    if (lang == 3) { name_object(Obj[45],"txt5e"); }
    if (lang == 4) { name_object(Obj[45],"txt5e"); }
    if (lang == 5) { name_object(Obj[45],"txt5e"); }
    if (lang == 6) { name_object(Obj[45],"txt5e"); }
    }

  //Object txt5g
  if (HideObj[46] == 0)
    {
  if (lang == 0)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[117],(y[117]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[46],"txt5g"); }
    if (lang == 1) { name_object(Obj[46],"txt5g"); }
    if (lang == 2) { name_object(Obj[46],"txt5g"); }
    if (lang == 3) { name_object(Obj[46],"txt5g"); }
    if (lang == 4) { name_object(Obj[46],"txt5g"); }
    if (lang == 5) { name_object(Obj[46],"txt5g"); }
    if (lang == 6) { name_object(Obj[46],"txt5g"); }
    }

  //Object txt5h
  if (HideObj[47] == 0)
    {
  if (lang == 0)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[47],"txt5h"); }
    if (lang == 1) { name_object(Obj[47],"txt5h"); }
    if (lang == 2) { name_object(Obj[47],"txt5h"); }
    if (lang == 3) { name_object(Obj[47],"txt5h"); }
    if (lang == 4) { name_object(Obj[47],"txt5h"); }
    if (lang == 5) { name_object(Obj[47],"txt5h"); }
    if (lang == 6) { name_object(Obj[47],"txt5h"); }
    }

  //Object txt5i
  if (HideObj[48] == 0)
    {
  if (lang == 0)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),y[271],"LINE");
    if (lang == 0) { name_object(Obj[48],"txt5i"); }
    if (lang == 1) { name_object(Obj[48],"txt5i"); }
    if (lang == 2) { name_object(Obj[48],"txt5i"); }
    if (lang == 3) { name_object(Obj[48],"txt5i"); }
    if (lang == 4) { name_object(Obj[48],"txt5i"); }
    if (lang == 5) { name_object(Obj[48],"txt5i"); }
    if (lang == 6) { name_object(Obj[48],"txt5i"); }
    }

  //Object txt5j
  if (HideObj[49] == 0)
    {
  if (lang == 0)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[49],"txt5j"); }
    if (lang == 1) { name_object(Obj[49],"txt5j"); }
    if (lang == 2) { name_object(Obj[49],"txt5j"); }
    if (lang == 3) { name_object(Obj[49],"txt5j"); }
    if (lang == 4) { name_object(Obj[49],"txt5j"); }
    if (lang == 5) { name_object(Obj[49],"txt5j"); }
    if (lang == 6) { name_object(Obj[49],"txt5j"); }
    }

  //Object txt5k
  if (HideObj[50] == 0)
    {
  if (lang == 0)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[69]+0.5),(y[69]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[50],"txt5k"); }
    if (lang == 1) { name_object(Obj[50],"txt5k"); }
    if (lang == 2) { name_object(Obj[50],"txt5k"); }
    if (lang == 3) { name_object(Obj[50],"txt5k"); }
    if (lang == 4) { name_object(Obj[50],"txt5k"); }
    if (lang == 5) { name_object(Obj[50],"txt5k"); }
    if (lang == 6) { name_object(Obj[50],"txt5k"); }
    }

  //Object backbandgrainline
  if (HideObj[51] == 0)
    {

  Obj[51] = newobject("poly");
  current_point=addpoint(x[141],y[141],"LINE");
  current_point=addpoint(x[332],y[332],"OPEN");
    if (lang == 0) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 1) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 2) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 3) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 4) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 5) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 6) { name_object(Obj[51],"backbandgrainline"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(24, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(25, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow0View9()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow0View9");
    }
  //Bust
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Bust Span
  //Bust Radius
  //Bust Point
  //Full Front Length
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Across Chest
  //Across Back
  //Nape to Waist
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //Front Shoulder
  //Back Shoulder
  //Bicep
  //Knee Circ
  //Full Sleeve length
  //Side waist to knee
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //Side waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Center front waist to floor
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Center Back to floor
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  //Bodyrise
  //Waist
  //Hip
  //Bust ease
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Waist ease
  //Hip ease
  //Short sleeve length
  //Dress length from waist
  //Bust dart
  //Measurements Bust dart
  Var[25]=Var[7]/-1 +   
 Var[4]/1 +   
0;
  //neck width
  //Measurements neck width
  Var[27]=  
 Var[0]/8 +   
1;
  //Waist to hip
  //Measurements Waist to hip
  Var[31]=  
 Var[13]/3 +   
0;
  //front bust arc
  //Measurements front bust arc
  Var[33]=Var[20]/4 +   
 Var[0]/4 +   
0;
  //Back shoulder dart
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //back arm hole total
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //total armhole
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Lower abdomen
  //Under Bust
  //Seam Allowance
  //backArmholeAfterDartRotate
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //front waist balance
  //Measurements front waist balance
  Var[64]=Var[15]/1 +   
 Var[14]/-1 +   
0;
  //Back Waist Balance
  //Measurements Back Waist Balance
  Var[65]=Var[16]/1 +   
 Var[14]/-1 +   
0;
  Flow0View9Points();
  }

Flow0View9Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //1
  x[1]=x[0];
y[1]=y[0];
  //1a
  x[2]=x[1]+Var[19]/4+3;
y[2]=y[1];
  //1b
  x[3]=x[2];
y[3]=y[2]+Var[4]/-1;
  //1c
  x[4]=x[3];
y[4]=y[3]+Var[13]/-3;
  //1d
  x[5]=x[4]+Var[19]/-4;
y[5]=y[4];
  //1e
  x[6]=x[3]+Var[18]/-4+-0.5;
y[6]=y[3];
  //1f
  x[7]=x[3];
y[7]=y[3]+Var[7]/2;
  //1g
  x[8]=x[7];
y[8]=y[7]+Var[20]/-4;
  //1h
  x[9]=x[8]+Var[33]/-1+-0.5;
y[9]=y[8];
  //1i
  x[10]=x[9];
y[10]=y[9]+Var[25];
  //1k
  x[11] = x[2];
y[11] = y[10];

  //Measurements armheight
  Var[26]=distance(x[11], y[11], x[2], y[2]);
  //1l
  x[12]=x[11];
y[12]=y[11]+Var[26]/4;
  //1m
  x[13] = x[10];
y[13] = y[12];

  //1n
  x[14]=x[2]+Var[27]/-2;
y[14]=y[2];
  //1o
  x[15]=x[2];
y[15]=y[2]+Var[27]/-2+-0.5;
  //1p
  x[16] = x[14];
y[16] = y[15];

  //Measurements Front neckline
  Var[47]=arclength(14, 16, 15);
  //1q
  x[17]=x[2]+Var[8]/-2;
y[17]=y[2];
  //1r
  x[18]=x[17];
y[18]=y[17]+-1.5;
  //Measurements Front shoulder line
  Var[35]=distance(x[18], y[18], x[14], y[14]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //1s
  x[19]=x[12]+Var[5]/-2;
y[19]=y[12];
  //1t
  x[20]= (x[19]+x[18])/2;
y[20]=(y[19]+y[18])/2;

  //1u
  x[21]=x[20]+0.375;
y[21]=y[20];
  //1v
  x[22]= (x[21]+x[19])/2;
y[22]=(y[21]+y[19])/2;

  //1w
  x[23]= (x[18]+x[21])/2;
y[23]=(y[18]+y[21])/2;

  //1x
  x[24] = x[21];
y[24] = y[23];

  //Measurements Front armhole a
  Var[40]=arclength(18, 24, 21);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1y
  x[25] = x[21];
y[25] = y[22];

  //Measurements Front armhole b
  Var[41]=arclength(21, 25, 19);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //1z
  x[26] = x[25];
y[26] = y[10];

  //2
  x[27]= (x[26]+x[10])/2;
y[27]=(y[26]+y[10])/2;

  //2a
  x[28]= (x[27]+x[26])/2;
y[28]=(y[27]+y[26])/2;

  //2b
  x[29]= (x[19]+x[26])/2;
y[29]=(y[19]+y[26])/2;

  //2c
  x[30] = x[28];
y[30] = y[29];

  //2d
  x[31]=x[28];
y[31]=y[28]+Var[26]/-4;
  //Measurements front armhole c
  Var[42]=arclength(19, 31, 10);
  //Measurements Front arm hole total
  Var[45]=Var[41]/1 + 
 Var[40]/1 +  
 Var[42]/1 +  
 
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //2e
  x[32]=x[6]+Var[21]/-4;
y[32]=y[6];
  //2f
  x[33]=x[5]+Var[22]/-4;
y[33]=y[5];
  //2g
  x[34]=x[2]+Var[1]/-2;
y[34]=y[2]+Var[3]/-1;
  //2h
  cont(33, 10, 35, +-2);

  //2i
    intersect(x[35],y[35],x[33],y[33],x[32],y[32],x[3],y[3], 0);
  x[36]=getresultx();
  y[36]=getresulty();

  //Measurements Front wr
  Var[28]=distance(x[36], y[36], x[32], y[32]);
  //2j
  x[37]=x[36]+Var[28]/3;
y[37]=y[36];
  //2k
  cont(37, 35, 38, Var[25]/-1+0);

  //Measurements Rotate Points Angle
  Var[29]=normalizeangle(angle(x[34], y[34], x[38], y[38]) - angle(x[34], y[34], x[35], y[35]))*180/3.14159;
  //2l
  x[39]= (x[33]+x[36])/2;
y[39]=(y[33]+y[36])/2;

  //2h1
  Dart(40, 35,  34,  Var[25] /-1 + 0, 0);

  //2m
  x[41] = x[34];
y[41] = y[4];

  //2n
  x[42] = x[34];
y[42] = y[3];

  //2o
  x[43]=x[42]+Var[28]/-3;
y[43]=y[42];
  //2p
  x[44]=x[42]+Var[28]/3;
y[44]=y[42];
  //2q
  x[45]=x[34];
y[45]=y[34]+Var[2]/-1;
  //2r
  x[46] = x[8];
y[46] = y[34];

  //2s
  x[47] = x[46];
y[47] = y[45];

  //Measurements Underbust level from waist
  Var[34]=distance(x[3], y[3], x[47], y[47]);
  //2t
    intersect(x[34],y[34],x[44],y[44],x[45],y[45],x[47],y[47], 0);
  x[48]=getresultx();
  y[48]=getresulty();

  //2u
    intersect(x[43],y[43],x[34],y[34],x[45],y[45],x[47],y[47], 0);
  x[49]=getresultx();
  y[49]=getresulty();

  //2v
  x[50]=x[48]+0.5;
y[50]=y[48];
  //2w
  x[51]=x[49]+-0.5;
y[51]=y[49];
  //2x
  x[52]=x[34];
y[52]=y[34]+-0.75;
  //2y
  x[53]=x[34];
y[53]=y[34]+0.75;
  //2z
  x[54]=x[25]+-1;
y[54]=y[25];
  //3
  x[55] = x[34];
y[55] = y[54];

  //2h(2)
    Rotate(56, 34, 35, Var[29]+0);
  //2g(2)
    Rotate(57, 34, 34, Var[29]+0);
  //1s(2)
    Rotate(58, 34, 19, Var[29]+0);
  //2d(2)
    Rotate(59, 34, 31, Var[29]+0);
  //1i(2)
    Rotate(60, 34, 10, Var[29]+0);
  //Measurements Rotate Points Angle(2)
  Var[30]=normalizeangle(angle(x[57], y[57], x[10], y[10]) - angle(x[57], y[57], x[60], y[60]))*180/3.14159;
  //3a
    intersect(x[60],y[60],x[37],y[37],x[34],y[34],x[56],y[56], 0);
  x[61]=getresultx();
  y[61]=getresulty();

  //3a(2)
    Rotate(62, 57, 61, Var[30]+0);
  //2g(3)
    Rotate(63, 57, 57, Var[30]+0);
  //1s(3)
    Rotate(64, 57, 58, Var[30]+0);
  //2d(3)
    Rotate(65, 57, 59, Var[30]+0);
  //1i(3)
    Rotate(66, 57, 60, Var[30]+0);
  //3b
  x[67]=x[41];
y[67]=y[41]+Var[31]/4;
  //Measurements Rotate Points Angle(5)
  Var[53]=normalizeangle(angle(x[67], y[67], x[50], y[50]) - angle(x[67], y[67], x[51], y[51]))*180/3.14159;
  //Measurements Rotate Points Angle(10)
  Var[58]=normalizeangle(angle(x[67], y[67], x[44], y[44]) - angle(x[67], y[67], x[43], y[43]))*180/3.14159;
  //3c
  x[68]=x[1]+Var[19]/-4;
y[68]=y[1]+Var[25]/-1;
  //3d
  x[69]=x[68];
y[69]=y[68]+Var[7]/-1;
  //3e
  x[70]=x[69];
y[70]=y[69]+Var[31]/-1;
  //3f
  x[71]=x[70]+Var[19]/4;
y[71]=y[70];
  //3g
  x[72]=x[69]+Var[18]/4+-0.5;
y[72]=y[69];
  //3h
  x[73]= (x[68]+x[69])/2;
y[73]=(y[68]+y[69])/2;

  //3i
  x[74]=x[73];
y[74]=y[73]+Var[20]/-4;
  //3j
  x[75]=x[74]+Var[0]/4+-0.5;
y[75]=y[74];
  //3k
  x[76]=x[68]+Var[27]/2;
y[76]=y[68];
  //3l
  x[77]=x[76];
y[77]=y[76]+0.75;
  //Measurements Back neckline
  Var[48]=arclength(68, 76, 77);
  //3m
  x[78]=x[68]+Var[9]/2;
y[78]=y[68];
  //3n
  x[79]=x[78];
y[79]=y[78]+-1.25;
  //Measurements Back shoulder line
  Var[36]=distance(x[77], y[77], x[79], y[79]);
  //Measurements Back shoulder dart
  Var[37]=Var[35]/-1 +   
 Var[36]/1 +   
0;
  //3o
  x[80]= (x[68]+x[74])/2;
y[80]=(y[68]+y[74])/2;

  //3p
  x[81]=x[80]+Var[6]/2;
y[81]=y[80];
  //3q
  x[82] = x[81];
y[82] = y[75];

  //3r
  x[83]= (x[79]+x[81])/2;
y[83]=(y[79]+y[81])/2;

  //3s
  x[84] = x[81];
y[84] = y[83];

  //Measurements Back armhole a
  Var[43]=arclength(79, 84, 81);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3t
  x[85]=x[75]+Var[20]/4;
y[85]=y[75];
  //Measurements Back armhole b
  Var[44]=arclength(81, 82, 85);
  //Measurements back arm hole total
  Var[46]=Var[44]/1 +   
 Var[43]/1 +   
0;
  //Measurements total armhole
  Var[49]=Var[46]/1 +   
 Var[45]/1 +   
0;
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //3u
  x[86]=x[72]+Var[21]/4;
y[86]=y[72];
  //3v
  x[87]=x[71]+Var[22]/4;
y[87]=y[71];
  //3w
    intersect(x[87],y[87],x[85],y[85],x[69],y[69],x[86],y[86], 0);
  x[88]=getresultx();
  y[88]=getresulty();

  //Measurements Back Waist reduction
  Var[32]=distance(x[88], y[88], x[86], y[86]);
  //3x
  x[89]= (x[88]+x[87])/2;
y[89]=(y[88]+y[87])/2;

  //3y
  x[90]=x[88]+Var[32]/-3;
y[90]=y[88];
  //33z
  x[91]= (x[80]+x[81])/2;
y[91]=(y[80]+y[81])/2;

  //4
  x[92] = x[91];
y[92] = y[74];

  //4a
  x[93] = x[92];
y[93] = y[69];

  //4b
  x[94] = x[93];
y[94] = y[70];

  //4c
  x[95]=x[93]+Var[32]/-3;
y[95]=y[93];
  //4d
  x[96]=x[93]+Var[32]/3;
y[96]=y[93];
  //Measurements Rotate Points Angle(11)
  Var[59]=normalizeangle(angle(x[94], y[94], x[95], y[95]) - angle(x[94], y[94], x[96], y[96]))*180/3.14159;
  //4e
  cont(85, 90, 97, Var[34]/-1+0);

  //4f
  cont(61, 37, 98, Var[34]/-1+0);

  //4g
  cont(97, 85, 99, Var[26]/-4+0);

  //4h
  x[100]= (x[77]+x[79])/2;
y[100]=(y[77]+y[79])/2;

  //4i
  right_ang(101, 100, 77,  + -3, 0);

  //4j
  right_ang(102, 81, 79,  + -4, 0);

  //4k
    intersect(x[100],y[100],x[101],y[101],x[81],y[81],x[102],y[102], 0);
  x[103]=getresultx();
  y[103]=getresulty();

  //4l
  cont(77, 100, 104, Var[37]/-2+0);

  //4m
  cont(79, 100, 105, Var[37]/-2+0);

  //Measurements Rotate Points Angle(3)
  Var[38]=normalizeangle(angle(x[103], y[103], x[104], y[104]) - angle(x[103], y[103], x[105], y[105]))*180/3.14159;
  //4m(2)
    Rotate(106, 103, 105, Var[38]+0);
  //4k(2)
    Rotate(107, 103, 103, Var[38]+0);
  //3p(2)
    Rotate(108, 103, 81, Var[38]+0);
  //Measurements Rotate Points Angle(4)
  Var[39]=normalizeangle(angle(x[103], y[103], x[81], y[81]) - angle(x[103], y[103], x[108], y[108]))*180/3.14159;
  //3n(2)
    Rotate(109, 103, 79, Var[38]+0);
  //4n
    intersect(x[109],y[109],x[77],y[77],x[107],y[107],x[104],y[104], 0);
  x[110]=getresultx();
  y[110]=getresulty();

  //4k(3)
    Rotate(111, 103, 107, Var[39]+0);
  //3p(3)
    Rotate(112, 103, 108, Var[39]+0);
  //3n(3)
    Rotate(113, 103, 109, Var[39]+0);
  //4n(2)
    Rotate(114, 103, 110, Var[39]+0);
  //4o
  x[115]= (x[18]+x[14])/2;
y[115]=(y[18]+y[14])/2;

  //4p
  cont(115, 34, 116, Var[2]/-1+0);

  //4r
  x[117] = x[74];
y[117] = y[97];

  //4q
  cont(34, 61, 118, +7);

  //4S
  cont(34, 62, 119, +7);

  //4t
  x[120]= (x[119]+x[118])/2;
y[120]=(y[119]+y[118])/2;

  //MoveStart(3)
  x[121]=x[0]+-3.01526402640264;
y[121]=y[0]+-10.6848184818482;
  //MoveEnd(3)
  x[122]=x[0]+-2.96988448844885;
y[122]=y[0]+-9.5049504950495;
  //3q(2)
  x[123] = x[82] + x[122] - x[121] ;
y[123] = y[82] + y[122] - y[121] ;

  //MoveStart(4)
  x[124]=x[0]+6.28754125412541;
y[124]=y[0]+-8.73349834983498;
  //MoveEnd(4)
  x[125]=x[0]+5.60684818481848;
y[125]=y[0]+-9.95874587458746;
  //1z(2)
  x[126] = x[26] + x[125] - x[124] ;
y[126] = y[26] + y[125] - y[124] ;

  //MoveStart(5)
  x[127]=x[0]+6.4236798679868;
y[127]=y[0]+-4.10478547854785;
  //MoveEnd(5)
  x[128]=x[0]+6.60519801980198;
y[128]=y[0]+-4.05940594059406;
  //1u(2)
  x[129] = x[21] + x[128] - x[127] ;
y[129] = y[21] + y[128] - y[127] ;

  //MoveStart(6)
  x[130]=x[0]+5.69760726072607;
y[130]=y[0]+-9.5503300330033;
  //MoveEnd(6)
  x[131]=x[0]+5.4707095709571;
y[131]=y[0]+-9.27805280528053;
  //1z(3)
  x[132] = x[126] + x[131] - x[130] ;
y[132] = y[126] + y[131] - y[130] ;

  //MoveStart(7)
  x[133]=x[0]+-7.04460778037259;
y[133]=y[0]+-1.91956874158687;
  //MoveEnd(7)
  x[134]=x[0]+-7.72550732581121;
y[134]=y[0]+-2.05574865067459;
  //3k(2)
  x[135] = x[76] + x[134] - x[133] ;
y[135] = y[76] + y[134] - y[133] ;

  //4u
  x[136]= (x[98]+x[51])/2;
y[136]=(y[98]+y[51])/2;

  //4v
  x[137]= (x[50]+x[47])/2;
y[137]=(y[50]+y[47])/2;

  //4w
    intersect(x[117],y[117],x[97],y[97],x[92],y[92],x[95],y[95], 0);
  x[138]=getresultx();
  y[138]=getresulty();

  //4x
    intersect(x[138],y[138],x[97],y[97],x[92],y[92],x[96],y[96], 0);
  x[139]=getresultx();
  y[139]=getresulty();

  //Measurements Rotate Points Angle(6)
  Var[54]=normalizeangle(angle(x[94], y[94], x[138], y[138]) - angle(x[94], y[94], x[139], y[139]))*180/3.14159;
  //4y
  x[140]= (x[139]+x[97])/2;
y[140]=(y[139]+y[97])/2;

  //4z
  x[141]= (x[117]+x[138])/2;
y[141]=(y[117]+y[138])/2;

  //5a
  x[142]=x[69];
y[142]=y[69]+Var[24]/-1;
  //5b
  x[143] = x[94];
y[143] = y[142];

  //5c
  x[144] = x[87];
y[144] = y[142];

  //5d
  x[145] = x[33];
y[145] = y[143];

  //5e
  x[146] = x[41];
y[146] = y[144];

  //5f
  x[147] = x[4];
y[147] = y[145];

  //5g
  x[148]=x[70];
y[148]=y[70]+-2;
  //5h
  x[149]= (x[148]+x[142])/2;
y[149]=(y[148]+y[142])/2;

  //5i
  x[150]=x[149]+-1.5;
y[150]=y[149];
  //5j
  x[151] = x[150];
y[151] = y[142];

  //5k
  x[152]=x[150];
y[152]=y[150]+-1;
  //5l
  x[153]= (x[61]+x[62])/2;
y[153]=(y[61]+y[62])/2;

  //5m
    intersect(x[153],y[153],x[34],y[34],x[10],y[10],x[62],y[62], 0);
  x[154]=getresultx();
  y[154]=getresulty();

  //5h1
  x[155]=x[149];
y[155]=y[149]+-1;
  //5n
    Mirror(156,50, 15, 3);

  //5o
    Mirror(157,51, 15, 3);

  //5p
    Mirror(158,136, 15, 3);

  //5q
    Mirror(159,34, 15, 3);

  //Measurements Rotate Points Angle(9)
  Var[57]=normalizeangle(angle(x[159], y[159], x[156], y[156]) - angle(x[159], y[159], x[157], y[157]))*180/3.14159;
  //5r
  x[160]= (x[69]+x[95])/2;
y[160]=(y[69]+y[95])/2;

  //5s
  x[161]= (x[96]+x[90])/2;
y[161]=(y[96]+y[90])/2;

  //5t
  x[162]= (x[37]+x[43])/2;
y[162]=(y[37]+y[43])/2;

  //5u
  x[163]= (x[44]+x[3])/2;
y[163]=(y[44]+y[3])/2;

  //5v
  x[164]= (x[162]+x[37])/2;
y[164]=(y[162]+y[37])/2;

  //5w
  x[165]= (x[140]+x[139])/2;
y[165]=(y[140]+y[139])/2;

  //5x
  x[166]= (x[136]+x[51])/2;
y[166]=(y[136]+y[51])/2;

  //3a1
    Mirror(167,154, 53, 52);

  //3a2
    Mirror(168,62, 53, 52);

  //3a3
    intersect(x[168],y[168],x[34],y[34],x[15],y[15],x[3],y[3], 0);
  x[169]=getresultx();
  y[169]=getresulty();

  //3a4
    intersect(x[34],y[34],x[167],y[167],x[15],y[15],x[3],y[3], 0);
  x[170]=getresultx();
  y[170]=getresulty();

  //Measurements Rotate Points Angle(7)
  Var[55]=normalizeangle(angle(x[34], y[34], x[170], y[170]) - angle(x[34], y[34], x[169], y[169]))*180/3.14159;
  //3a5
  x[171]= (x[143]+x[144])/2;
y[171]=(y[143]+y[144])/2;

  //3a6
  x[172]= (x[145]+x[146])/2;
y[172]=(y[145]+y[146])/2;

  //2w(2)
    Rotate(173, 67, 51, Var[53]+0);
  //5x(2)
    Rotate(174, 67, 166, Var[53]+0);
  //4u(2)
    Rotate(175, 67, 136, Var[53]+0);
  //4f(2)
    Rotate(176, 67, 98, Var[53]+0);
  //2j(2)
    Rotate(177, 67, 37, Var[53]+0);
  //2l(2)
    Rotate(178, 67, 39, Var[53]+0);
  //2f(2)
    Rotate(179, 67, 33, Var[53]+0);
  //5d(2)
    Rotate(180, 67, 145, Var[53]+0);
  //4x(2)
    Rotate(181, 94, 139, Var[54]+0);
  //5w(2)
    Rotate(182, 94, 165, Var[54]+0);
  //4y(2)
    Rotate(183, 94, 140, Var[54]+0);
  //4e(2)
    Rotate(184, 94, 97, Var[54]+0);
  //3y(2)
    Rotate(185, 94, 90, Var[54]+0);
  //3x(2)
    Rotate(186, 94, 89, Var[54]+0);
  //3v(2)
    Rotate(187, 94, 87, Var[54]+0);
  //5c(2)
    Rotate(188, 94, 144, Var[54]+0);
  //3a3(2)
    Rotate(189, 34, 169, Var[55]+0);
  //2g(4)
    Rotate(190, 34, 34, Var[55]+0);
  //3a(3)
    Rotate(191, 34, 62, Var[55]+0);
  //Measurements Rotate Points Angle(8)
  Var[56]=normalizeangle(angle(x[34], y[34], x[191], y[191]) - angle(x[34], y[34], x[61], y[61]))*180/3.14159;
  //1i(4)
    Rotate(192, 34, 10, Var[55]+0);
  //1z(4)
    Rotate(193, 34, 126, Var[55]+0);
  //1s(4)
    Rotate(194, 34, 19, Var[55]+0);
  //1u(3)
    Rotate(195, 34, 129, Var[55]+0);
  //1r(2)
    Rotate(196, 34, 18, Var[55]+0);
  //1n(2)
    Rotate(197, 34, 14, Var[55]+0);
  //1p(2)
    Rotate(198, 34, 16, Var[55]+0);
  //1o(2)
    Rotate(199, 34, 15, Var[55]+0);
  //3a(4)
    Rotate(200, 34, 61, Var[56]+0);
  //2g(5)
    Rotate(201, 34, 34, Var[56]+0);
  //2w(3)
    Rotate(202, 34, 51, Var[56]+0);
  //5x(3)
    Rotate(203, 34, 166, Var[56]+0);
  //4u(3)
    Rotate(204, 34, 136, Var[56]+0);
  //4f(3)
    Rotate(205, 34, 98, Var[56]+0);
  //5q(2)
    Rotate(206, 159, 159, Var[57]+0);
  //5o(2)
    Rotate(207, 159, 157, Var[57]+0);
  //5p(2)
    Rotate(208, 159, 158, Var[57]+0);
  //2f1
  x[209]= (x[33]+x[145])/2;
y[209]=(y[33]+y[145])/2;

  //2f2
  x[210]= (x[87]+x[144])/2;
y[210]=(y[87]+y[144])/2;

  //2o(2)
    Rotate(211, 67, 43, Var[58]+0);
  //5t(2)
    Rotate(212, 67, 162, Var[58]+0);
  //5v(2)
    Rotate(213, 67, 164, Var[58]+0);
  //2j(3)
    Rotate(214, 67, 37, Var[58]+0);
  //2l(3)
    Rotate(215, 67, 39, Var[58]+0);
  //2f(3)
    Rotate(216, 67, 33, Var[58]+0);
  //2f1(2)
    Rotate(217, 67, 209, Var[58]+0);
  //5d(3)
    Rotate(218, 67, 145, Var[58]+0);
  //4d(2)
    Rotate(219, 94, 96, Var[59]+0);
  //5s(2)
    Rotate(220, 94, 161, Var[59]+0);
  //3y(3)
    Rotate(221, 94, 90, Var[59]+0);
  //3x(3)
    Rotate(222, 94, 89, Var[59]+0);
  //3v(3)
    Rotate(223, 94, 87, Var[59]+0);
  //2f2(2)
    Rotate(224, 94, 210, Var[59]+0);
  //5c(3)
    Rotate(225, 94, 144, Var[59]+0);
  //2f3
  x[226]= (x[94]+x[143])/2;
y[226]=(y[94]+y[143])/2;

  //2f4
    LineArcIntersect(197,198,206,47,15 , 227 );

  //2f5
  x[228] = x[197];
y[228] = y[194];

  //2f6
    Mirror(229,52, 47, 15);

  //2f7
  x[230] = x[109];
y[230] = y[79];

  //Measurements bacjdartextra
  Var[60]=distance(x[79], y[79], x[230], y[230]);
  //Measurements backArmholeAfterDartRotate
  Var[61]=Var[60]/1 +   
 Var[46]/1 +   
0;
  //4f(4)
  x[231] = x[98] + x[211] - x[43] ;
y[231] = y[98] + y[211] - y[43] ;

  //4u(4)
  x[232] = x[136] + x[211] - x[43] ;
y[232] = y[136] + y[211] - y[43] ;

  //5x(4)
  x[233] = x[166] + x[211] - x[43] ;
y[233] = y[166] + y[211] - y[43] ;

  //2w(4)
  x[234] = x[51] + x[211] - x[43] ;
y[234] = y[51] + y[211] - y[43] ;

  //Measurements Rotate Points Angle(12)
  Var[62]=normalizeangle(angle(x[211], y[211], x[173], y[173]) - angle(x[211], y[211], x[234], y[234]))*180/3.14159;
  //2o(3)
  x[235] = x[43] + x[211] - x[43] ;
y[235] = y[43] + y[211] - y[43] ;

  //5t(3)
  x[236] = x[162] + x[211] - x[43] ;
y[236] = y[162] + y[211] - y[43] ;

  //5v(3)
  x[237] = x[164] + x[211] - x[43] ;
y[237] = y[164] + y[211] - y[43] ;

  //2j(4)
  x[238] = x[37] + x[211] - x[43] ;
y[238] = y[37] + y[211] - y[43] ;

  //4f(5)
    Rotate(239, 211, 231, Var[62]+0);
  //4u(5)
    Rotate(240, 211, 232, Var[62]+0);
  //5x(5)
    Rotate(241, 211, 233, Var[62]+0);
  //2w(5)
    Rotate(242, 211, 234, Var[62]+0);
  //2o(4)
    Rotate(243, 211, 235, Var[62]+0);
  //5t(4)
    Rotate(244, 211, 236, Var[62]+0);
  //5v(4)
    Rotate(245, 211, 237, Var[62]+0);
  //2j(5)
    Rotate(246, 211, 238, Var[62]+0);
  //4x(3)
  x[247] = x[139] + x[138] - x[139] ;
y[247] = y[139] + y[138] - y[139] ;

  //5w(3)
  x[248] = x[165] + x[138] - x[139] ;
y[248] = y[165] + y[138] - y[139] ;

  //4y(3)
  x[249] = x[140] + x[138] - x[139] ;
y[249] = y[140] + y[138] - y[139] ;

  //4e(3)
  x[250] = x[97] + x[138] - x[139] ;
y[250] = y[97] + y[138] - y[139] ;

  //3y(4)
  x[251] = x[90] + x[138] - x[139] ;
y[251] = y[90] + y[138] - y[139] ;

  //5s(3)
  x[252] = x[161] + x[138] - x[139] ;
y[252] = y[161] + y[138] - y[139] ;

  //4d(3)
  x[253] = x[96] + x[138] - x[139] ;
y[253] = y[96] + y[138] - y[139] ;

  //Measurements Rotate Points Angle(13)
  Var[63]=normalizeangle(angle(x[247], y[247], x[219], y[219]) - angle(x[247], y[247], x[253], y[253]))*180/3.14159;
  //4x(4)
    Rotate(254, 247, 247, Var[63]+0);
  //5w(4)
    Rotate(255, 247, 248, Var[63]+0);
  //4y(4)
    Rotate(256, 247, 249, Var[63]+0);
  //4e(4)
    Rotate(257, 247, 250, Var[63]+0);
  //3y(5)
    Rotate(258, 247, 251, Var[63]+0);
  //5s(4)
    Rotate(259, 247, 252, Var[63]+0);
  //4d(4)
    Rotate(260, 247, 253, Var[63]+0);
  //6a
  x[261]=x[203];
y[261]=y[203]+0.25;
  //6b
  x[262]=x[261];
y[262]=y[261]+0.25;
  //6c
  x[263]=x[51];
y[263]=y[51];
  //6d
  x[264]=x[263];
y[264]=y[263]+0.25;
  //6e
  x[265]=x[137];
y[265]=y[137]+0.25;
  //6f
  x[266]=x[265];
y[266]=y[265]+0.25;
  //6g
  x[267]= (x[239]+x[246])/2;
y[267]=(y[239]+y[246])/2;

  //6h
  x[268]= (x[267]+x[239])/2;
y[268]=(y[267]+y[239])/2;

  //6i
  x[269]= (x[257]+x[258])/2;
y[269]=(y[257]+y[258])/2;

  //6j
  x[270]= (x[269]+x[257])/2;
y[270]=(y[269]+y[257])/2;

  //6k
  x[271]= (x[117]+x[69])/2;
y[271]=(y[117]+y[69])/2;

  //9a
  x[272]=x[69];
y[272]=y[69]+Var[65];
  //9b
  x[273]=x[160];
y[273]=y[160]+Var[65];
  //9c
  x[274]=x[95];
y[274]=y[95]+Var[65];
  //9d
  x[275]=x[96];
y[275]=y[96]+Var[65];
  //9e
  x[276]=x[3];
y[276]=y[3]+Var[64];
  //9f
  x[277] = x[163];
y[277] = y[276];

  //9g
  x[278] = x[44];
y[278] = y[276];

  //9h
  x[279] = x[43];
y[279] = y[276];

  //99i
  x[280] = x[161];
y[280] = y[272];

  //9i
  x[281] = x[164];
y[281] = y[276];

  //9j
    Mirror(282,277, 47, 4);

  //9k
    Mirror(283,278, 47, 4);

  //9l
    Mirror(284,67, 47, 4);

  //9m
  x[285] = x[162];
y[285] = y[5];

  //9n
  x[286] = x[161];
y[286] = y[285];

  //9o
    LineArcIntersect(37,281,279,162,285 , 287 );

  //9p
    Mirror(288,279, 47, 4);

  //Measurements Rotate Points Angle(14)
  Var[66]=normalizeangle(angle(x[284], y[284], x[283], y[283]) - angle(x[284], y[284], x[288], y[288]))*180/3.14159;
  //9q
    Mirror(289,287, 47, 4);

  //9r
    Mirror(290,285, 47, 4);

  //9l(2)
    Rotate(291, 284, 284, Var[66]+0);
  //9p(2)
    Rotate(292, 284, 288, Var[66]+0);
  //9q(2)
    Rotate(293, 284, 289, Var[66]+0);
  //9r(2)
    Rotate(294, 284, 290, Var[66]+0);
  //9s
  x[295] = x[293];
y[295] = y[290];

  //9t
  x[296] = x[295];
y[296] = y[146];

  //MoveStart(8)
  x[297]=x[0]+9.64548764779987;
y[297]=y[0]+-11.8337535536926;
  //MoveEnd(8)
  x[298]=x[0]+11.6248116379973;
y[298]=y[0]+-10.3265618914322;
  //1n(3)
  x[299] = x[197] + x[298] - x[297] ;
y[299] = y[197] + y[298] - y[297] ;

  //1r(3)
  x[300] = x[196] + x[298] - x[297] ;
y[300] = y[196] + y[298] - y[297] ;

  //1u(4)
  x[301] = x[195] + x[298] - x[297] ;
y[301] = y[195] + y[298] - y[297] ;

  //1s(5)
  x[302] = x[194] + x[298] - x[297] ;
y[302] = y[194] + y[298] - y[297] ;

  //1z(5)
  x[303] = x[193] + x[298] - x[297] ;
y[303] = y[193] + y[298] - y[297] ;

  //1i(5)
  x[304] = x[192] + x[298] - x[297] ;
y[304] = y[192] + y[298] - y[297] ;

  //4f(6)
  x[305] = x[205] + x[298] - x[297] ;
y[305] = y[205] + y[298] - y[297] ;

  //4u(6)
  x[306] = x[204] + x[298] - x[297] ;
y[306] = y[204] + y[298] - y[297] ;

  //5x(6)
  x[307] = x[203] + x[298] - x[297] ;
y[307] = y[203] + y[298] - y[297] ;

  //2w(6)
  x[308] = x[51] + x[298] - x[297] ;
y[308] = y[51] + y[298] - y[297] ;

  //2v(2)
  x[309] = x[50] + x[298] - x[297] ;
y[309] = y[50] + y[298] - y[297] ;

  //4v(2)
  x[310] = x[137] + x[298] - x[297] ;
y[310] = y[137] + y[298] - y[297] ;

  //2s(2)
  x[311] = x[47] + x[298] - x[297] ;
y[311] = y[47] + y[298] - y[297] ;

  //5n(2)
  x[312] = x[156] + x[298] - x[297] ;
y[312] = y[156] + y[298] - y[297] ;

  //5p(3)
  x[313] = x[208] + x[298] - x[297] ;
y[313] = y[208] + y[298] - y[297] ;

  //1p(3)
  x[314] = x[198] + x[298] - x[297] ;
y[314] = y[198] + y[298] - y[297] ;

  //1s(6)
  x[315] = x[19] + x[298] - x[297] ;
y[315] = y[19] + y[298] - y[297] ;

  //3a(5)
  x[316] = x[62] + x[298] - x[297] ;
y[316] = y[62] + y[298] - y[297] ;

  //1s(7)
  x[317] = x[19] + x[298] - x[297] ;
y[317] = y[19] + y[298] - y[297] ;

  //1s(8)
  x[318] = x[19] + x[298] - x[297] ;
y[318] = y[19] + y[298] - y[297] ;

  //6a(2)
  x[319] = x[261] + x[298] - x[297] ;
y[319] = y[261] + y[298] - y[297] ;

  //6c(2)
  x[320] = x[263] + x[298] - x[297] ;
y[320] = y[263] + y[298] - y[297] ;

  //6e(2)
  x[321] = x[265] + x[298] - x[297] ;
y[321] = y[265] + y[298] - y[297] ;

  //6b(2)
  x[322] = x[262] + x[298] - x[297] ;
y[322] = y[262] + y[298] - y[297] ;

  //6d(2)
  x[323] = x[264] + x[298] - x[297] ;
y[323] = y[264] + y[298] - y[297] ;

  //6f(2)
  x[324] = x[266] + x[298] - x[297] ;
y[324] = y[266] + y[298] - y[297] ;

  //6d(3)
  x[325] = x[264] + x[298] - x[297] ;
y[325] = y[264] + y[298] - y[297] ;

  //2s(3)
  x[326] = x[47] + x[298] - x[297] ;
y[326] = y[47] + y[298] - y[297] ;

  //2r(2)
  x[327] = x[46] + x[298] - x[297] ;
y[327] = y[46] + y[298] - y[297] ;

  //1l(2)
  x[328] = x[12] + x[298] - x[297] ;
y[328] = y[12] + y[298] - y[297] ;

  //2s(4)
  x[329] = x[47] + x[298] - x[297] ;
y[329] = y[47] + y[298] - y[297] ;

  //2r(3)
  x[330] = x[46] + x[298] - x[297] ;
y[330] = y[46] + y[298] - y[297] ;

  //7X1
  x[331]=x[69];
y[331]=y[69]+0.5;
  //7x2
  x[332] = x[141];
y[332] = y[331];

  }

Flow0View9Objects()
{

  //Object Front
  if (HideObj[0] == 0)
    {

  Obj[0] = newobject("poly");
  current_point=addpoint(x[299],y[299],"LINE");
  current_point=addpoint(x[300],y[300],"XARC_START");
  current_point=addpoint(x[301],y[301],"XARC_CORNER");
  current_point=addpoint(x[302],y[302],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[303],y[303],"XARC_CORNER");
  current_point=addpoint(x[304],y[304],"LINE");
  current_point=addpoint(x[305],y[305],"LINE");
  current_point=addpoint(x[306],y[306],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[307],y[307],"XARC_START");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[308],y[308],"XARC_CORNER");
  current_point=addpoint(x[309],y[309],"LINE");
  current_point=addpoint(x[310],y[310],"LINE");
  notch_type(current_point,"TAB",1);
  current_point=addpoint(x[311],y[311],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[312],y[312],"XARC_START");
  current_point=addpoint(x[314],y[314],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[0],"Front"); }
    if (lang == 1) { name_object(Obj[0],"Front"); }
    if (lang == 2) { name_object(Obj[0],"Front"); }
    if (lang == 3) { name_object(Obj[0],"Front"); }
    if (lang == 4) { name_object(Obj[0],"Front"); }
    if (lang == 5) { name_object(Obj[0],"Front"); }
    if (lang == 6) { name_object(Obj[0],"Front"); }
    }

  //Object BACK
  if (HideObj[1] == 0)
    {

  Obj[1] = newobject("poly");
  current_point=addpoint(x[74],y[74],"LINE");
  current_point=addpoint(x[80],y[80],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[68],y[68],"XARC_START");
  current_point=addpoint(x[135],y[135],"XARC_CORNER");
  current_point=addpoint(x[77],y[77],"LINE");
  current_point=addpoint(x[109],y[109],"XARC_START");
  current_point=addpoint(x[84],y[84],"XARC_CORNER");
  current_point=addpoint(x[81],y[81],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[123],y[123],"XARC_CORNER");
  current_point=addpoint(x[85],y[85],"LINE");
  current_point=addpoint(x[99],y[99],"LINE");
  current_point=addpoint(x[97],y[97],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[117],y[117],"LINE");
    if (lang == 0) { name_object(Obj[1],"BACK"); }
    if (lang == 1) { name_object(Obj[1],"BACK"); }
    if (lang == 2) { name_object(Obj[1],"BACK"); }
    if (lang == 3) { name_object(Obj[1],"BACK"); }
    if (lang == 4) { name_object(Obj[1],"BACK"); }
    if (lang == 5) { name_object(Obj[1],"BACK"); }
    if (lang == 6) { name_object(Obj[1],"BACK"); }
    }

  //Object Back waist dart
  if (HideObj[2] == 0)
    {

  Obj[2] = newobject("poly");
  current_point=addpoint(x[94],y[94],"LINE");
  current_point=addpoint(x[274],y[274],"LINE");
  current_point=addpoint(x[275],y[275],"LINE");
    if (lang == 0) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 1) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 2) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 3) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 4) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 5) { name_object(Obj[2],"Back waist dart"); }
    if (lang == 6) { name_object(Obj[2],"Back waist dart"); }
    }

  //Object 60b
  if (HideObj[3] == 0)
    {
  if (lang == 0)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[3] = newobject("Text","Upper Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[315]+1),(y[315]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[3],"60b"); }
    if (lang == 1) { name_object(Obj[3],"60b"); }
    if (lang == 2) { name_object(Obj[3],"60b"); }
    if (lang == 3) { name_object(Obj[3],"60b"); }
    if (lang == 4) { name_object(Obj[3],"60b"); }
    if (lang == 5) { name_object(Obj[3],"60b"); }
    if (lang == 6) { name_object(Obj[3],"60b"); }
    }

  //Object 60c
  if (HideObj[4] == 0)
    {
  if (lang == 0)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[4] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[316]+1),y[316],"LINE");
    if (lang == 0) { name_object(Obj[4],"60c"); }
    if (lang == 1) { name_object(Obj[4],"60c"); }
    if (lang == 2) { name_object(Obj[4],"60c"); }
    if (lang == 3) { name_object(Obj[4],"60c"); }
    if (lang == 4) { name_object(Obj[4],"60c"); }
    if (lang == 5) { name_object(Obj[4],"60c"); }
    if (lang == 6) { name_object(Obj[4],"60c"); }
    }

  //Object 60d
  if (HideObj[5] == 0)
    {
  if (lang == 0)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[5] = newobject("Text","Upper Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+1.5),"LINE");
    if (lang == 0) { name_object(Obj[5],"60d"); }
    if (lang == 1) { name_object(Obj[5],"60d"); }
    if (lang == 2) { name_object(Obj[5],"60d"); }
    if (lang == 3) { name_object(Obj[5],"60d"); }
    if (lang == 4) { name_object(Obj[5],"60d"); }
    if (lang == 5) { name_object(Obj[5],"60d"); }
    if (lang == 6) { name_object(Obj[5],"60d"); }
    }

  //Object 60e
  if (HideObj[6] == 0)
    {
  if (lang == 0)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[6] = newobject("Text","Center back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[80],y[80],"LINE");
    if (lang == 0) { name_object(Obj[6],"60e"); }
    if (lang == 1) { name_object(Obj[6],"60e"); }
    if (lang == 2) { name_object(Obj[6],"60e"); }
    if (lang == 3) { name_object(Obj[6],"60e"); }
    if (lang == 4) { name_object(Obj[6],"60e"); }
    if (lang == 5) { name_object(Obj[6],"60e"); }
    if (lang == 6) { name_object(Obj[6],"60e"); }
    }

  //Object 60f
  if (HideObj[7] == 0)
    {
  if (lang == 0)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[7] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[117]+0.5),(y[117]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[7],"60f"); }
    if (lang == 1) { name_object(Obj[7],"60f"); }
    if (lang == 2) { name_object(Obj[7],"60f"); }
    if (lang == 3) { name_object(Obj[7],"60f"); }
    if (lang == 4) { name_object(Obj[7],"60f"); }
    if (lang == 5) { name_object(Obj[7],"60f"); }
    if (lang == 6) { name_object(Obj[7],"60f"); }
    }

  //Object LowerFront
  if (HideObj[8] == 0)
    {

  Obj[8] = newobject("poly");
  current_point=addpoint(x[146],y[146],"LINE");
  current_point=addpoint(x[145],y[145],"LINE");
  current_point=addpoint(x[209],y[209],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[33],y[33],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[39],y[39],"XARC_CORNER");
  current_point=addpoint(x[37],y[37],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[287],y[287],"LINE");
  current_point=addpoint(x[279],y[279],"LINE");
  current_point=addpoint(x[278],y[278],"LINE");
  current_point=addpoint(x[277],y[277],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[276],y[276],"LINE");
  current_point=addpoint(x[282],y[282],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[292],y[292],"XARC_CORNER");
  current_point=addpoint(x[293],y[293],"XARC_START");
  current_point=addpoint(x[296],y[296],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[8],"LowerFront"); }
    if (lang == 1) { name_object(Obj[8],"LowerFront"); }
    if (lang == 2) { name_object(Obj[8],"LowerFront"); }
    if (lang == 3) { name_object(Obj[8],"LowerFront"); }
    if (lang == 4) { name_object(Obj[8],"LowerFront"); }
    if (lang == 5) { name_object(Obj[8],"LowerFront"); }
    if (lang == 6) { name_object(Obj[8],"LowerFront"); }
    }

  //Object Lowerback
  if (HideObj[9] == 0)
    {

  Obj[9] = newobject("poly");
  current_point=addpoint(x[90],y[90],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"XARC_CORNER");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[272],y[272],"LINE");
  current_point=addpoint(x[273],y[273],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[274],y[274],"LINE");
  current_point=addpoint(x[275],y[275],"XARC_START");
  current_point=addpoint(x[280],y[280],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[9],"Lowerback"); }
    if (lang == 1) { name_object(Obj[9],"Lowerback"); }
    if (lang == 2) { name_object(Obj[9],"Lowerback"); }
    if (lang == 3) { name_object(Obj[9],"Lowerback"); }
    if (lang == 4) { name_object(Obj[9],"Lowerback"); }
    if (lang == 5) { name_object(Obj[9],"Lowerback"); }
    if (lang == 6) { name_object(Obj[9],"Lowerback"); }
    }

  //Object LowerFrontDart
  if (HideObj[10] == 0)
    {

  Obj[10] = newobject("poly");
  current_point=addpoint(x[279],y[279],"LINE");
  current_point=addpoint(x[67],y[67],"LINE");
  current_point=addpoint(x[278],y[278],"OPEN");
    if (lang == 0) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 1) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 2) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 3) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 4) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 5) { name_object(Obj[10],"LowerFrontDart"); }
    if (lang == 6) { name_object(Obj[10],"LowerFrontDart"); }
    }

  //Object UpperbackDart
  if (HideObj[11] == 0)
    {

  Obj[11] = newobject("poly");
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[92],y[92],"LINE");
  current_point=addpoint(x[139],y[139],"OPEN");
    if (lang == 0) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 1) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 2) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 3) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 4) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 5) { name_object(Obj[11],"UpperbackDart"); }
    if (lang == 6) { name_object(Obj[11],"UpperbackDart"); }
    }

  //Object txt1
  if (HideObj[13] == 0)
    {
  if (lang == 0)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[13] = newobject("Text","Empire Cross over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[317]+1),y[317],"LINE");
    if (lang == 0) { name_object(Obj[13],"txt1"); }
    if (lang == 1) { name_object(Obj[13],"txt1"); }
    if (lang == 2) { name_object(Obj[13],"txt1"); }
    if (lang == 3) { name_object(Obj[13],"txt1"); }
    if (lang == 4) { name_object(Obj[13],"txt1"); }
    if (lang == 5) { name_object(Obj[13],"txt1"); }
    if (lang == 6) { name_object(Obj[13],"txt1"); }
    }

  //Object txt1b
  if (HideObj[14] == 0)
    {
  if (lang == 0)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[14] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[318]+1),(y[318]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[14],"txt1b"); }
    if (lang == 1) { name_object(Obj[14],"txt1b"); }
    if (lang == 2) { name_object(Obj[14],"txt1b"); }
    if (lang == 3) { name_object(Obj[14],"txt1b"); }
    if (lang == 4) { name_object(Obj[14],"txt1b"); }
    if (lang == 5) { name_object(Obj[14],"txt1b"); }
    if (lang == 6) { name_object(Obj[14],"txt1b"); }
    }

  //Object txt2a
  if (HideObj[15] == 0)
    {
  if (lang == 0)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[15] = newobject("Text","Empire line dress",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+2.5),"LINE");
    if (lang == 0) { name_object(Obj[15],"txt2a"); }
    if (lang == 1) { name_object(Obj[15],"txt2a"); }
    if (lang == 2) { name_object(Obj[15],"txt2a"); }
    if (lang == 3) { name_object(Obj[15],"txt2a"); }
    if (lang == 4) { name_object(Obj[15],"txt2a"); }
    if (lang == 5) { name_object(Obj[15],"txt2a"); }
    if (lang == 6) { name_object(Obj[15],"txt2a"); }
    }

  //Object txt2cb
  if (HideObj[16] == 0)
    {
  if (lang == 0)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[16] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[73]+1.5),(y[73]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[16],"txt2cb"); }
    if (lang == 1) { name_object(Obj[16],"txt2cb"); }
    if (lang == 2) { name_object(Obj[16],"txt2cb"); }
    if (lang == 3) { name_object(Obj[16],"txt2cb"); }
    if (lang == 4) { name_object(Obj[16],"txt2cb"); }
    if (lang == 5) { name_object(Obj[16],"txt2cb"); }
    if (lang == 6) { name_object(Obj[16],"txt2cb"); }
    }

  //Object txt2c
  if (HideObj[17] == 0)
    {
  if (lang == 0)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[17] = newobject("Text","Empire Cross Over dress1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-1),"LINE");
    if (lang == 0) { name_object(Obj[17],"txt2c"); }
    if (lang == 1) { name_object(Obj[17],"txt2c"); }
    if (lang == 2) { name_object(Obj[17],"txt2c"); }
    if (lang == 3) { name_object(Obj[17],"txt2c"); }
    if (lang == 4) { name_object(Obj[17],"txt2c"); }
    if (lang == 5) { name_object(Obj[17],"txt2c"); }
    if (lang == 6) { name_object(Obj[17],"txt2c"); }
    }

  //Object txt2d
  if (HideObj[18] == 0)
    {
  if (lang == 0)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[18] = newobject("Text","Lower Back",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-1),"LINE");
    if (lang == 0) { name_object(Obj[18],"txt2d"); }
    if (lang == 1) { name_object(Obj[18],"txt2d"); }
    if (lang == 2) { name_object(Obj[18],"txt2d"); }
    if (lang == 3) { name_object(Obj[18],"txt2d"); }
    if (lang == 4) { name_object(Obj[18],"txt2d"); }
    if (lang == 5) { name_object(Obj[18],"txt2d"); }
    if (lang == 6) { name_object(Obj[18],"txt2d"); }
    }

  //Object txt2e
  if (HideObj[19] == 0)
    {
  if (lang == 0)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[19] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),(y[148]+-2),"LINE");
    if (lang == 0) { name_object(Obj[19],"txt2e"); }
    if (lang == 1) { name_object(Obj[19],"txt2e"); }
    if (lang == 2) { name_object(Obj[19],"txt2e"); }
    if (lang == 3) { name_object(Obj[19],"txt2e"); }
    if (lang == 4) { name_object(Obj[19],"txt2e"); }
    if (lang == 5) { name_object(Obj[19],"txt2e"); }
    if (lang == 6) { name_object(Obj[19],"txt2e"); }
    }

  //Object txt2f
  if (HideObj[20] == 0)
    {
  if (lang == 0)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[20] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[20],"txt2f"); }
    if (lang == 1) { name_object(Obj[20],"txt2f"); }
    if (lang == 2) { name_object(Obj[20],"txt2f"); }
    if (lang == 3) { name_object(Obj[20],"txt2f"); }
    if (lang == 4) { name_object(Obj[20],"txt2f"); }
    if (lang == 5) { name_object(Obj[20],"txt2f"); }
    if (lang == 6) { name_object(Obj[20],"txt2f"); }
    }

  //Object txt2g
  if (HideObj[21] == 0)
    {
  if (lang == 0)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[21] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[145]+1),(y[145]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[21],"txt2g"); }
    if (lang == 1) { name_object(Obj[21],"txt2g"); }
    if (lang == 2) { name_object(Obj[21],"txt2g"); }
    if (lang == 3) { name_object(Obj[21],"txt2g"); }
    if (lang == 4) { name_object(Obj[21],"txt2g"); }
    if (lang == 5) { name_object(Obj[21],"txt2g"); }
    if (lang == 6) { name_object(Obj[21],"txt2g"); }
    }

  //Object txt2h
  if (HideObj[22] == 0)
    {
  if (lang == 0)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[22] = newobject("Text","Center Front fold line",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[4],(y[4]+1),"LINE");
    if (lang == 0) { name_object(Obj[22],"txt2h"); }
    if (lang == 1) { name_object(Obj[22],"txt2h"); }
    if (lang == 2) { name_object(Obj[22],"txt2h"); }
    if (lang == 3) { name_object(Obj[22],"txt2h"); }
    if (lang == 4) { name_object(Obj[22],"txt2h"); }
    if (lang == 5) { name_object(Obj[22],"txt2h"); }
    if (lang == 6) { name_object(Obj[22],"txt2h"); }
    }

  //Object txt2i
  if (HideObj[23] == 0)
    {
  if (lang == 0)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[23] = newobject("Text","Center Back Zipper line",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[23],"txt2i"); }
    if (lang == 1) { name_object(Obj[23],"txt2i"); }
    if (lang == 2) { name_object(Obj[23],"txt2i"); }
    if (lang == 3) { name_object(Obj[23],"txt2i"); }
    if (lang == 4) { name_object(Obj[23],"txt2i"); }
    if (lang == 5) { name_object(Obj[23],"txt2i"); }
    if (lang == 6) { name_object(Obj[23],"txt2i"); }
    }

  //Object backband1
  if (HideObj[24] == 0)
    {

  Obj[24] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[255],y[255],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[256],y[256],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[257],y[257],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[270],y[270],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[269],y[269],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[258],y[258],"LINE");
  current_point=addpoint(x[259],y[259],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[160],y[160],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  current_point=addpoint(x[271],y[271],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
    if (lang == 0) { name_object(Obj[24],"backband1"); }
    if (lang == 1) { name_object(Obj[24],"backband1"); }
    if (lang == 2) { name_object(Obj[24],"backband1"); }
    if (lang == 3) { name_object(Obj[24],"backband1"); }
    if (lang == 4) { name_object(Obj[24],"backband1"); }
    if (lang == 5) { name_object(Obj[24],"backband1"); }
    if (lang == 6) { name_object(Obj[24],"backband1"); }
    }

  //Object frontband1
  if (HideObj[25] == 0)
    {

  Obj[25] = newobject("poly");
  current_point=addpoint(x[50],y[50],"LINE");
  current_point=addpoint(x[137],y[137],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[47],y[47],"LINE");
  current_point=addpoint(x[3],y[3],"LINE");
  current_point=addpoint(x[163],y[163],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[44],y[44],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[244],y[244],"LINE");
  current_point=addpoint(x[245],y[245],"LINE");
  current_point=addpoint(x[246],y[246],"LINE");
  current_point=addpoint(x[267],y[267],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[268],y[268],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[239],y[239],"LINE");
  current_point=addpoint(x[240],y[240],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[241],y[241],"LINE");
  notch_type(current_point,"TAB",0);
    if (lang == 0) { name_object(Obj[25],"frontband1"); }
    if (lang == 1) { name_object(Obj[25],"frontband1"); }
    if (lang == 2) { name_object(Obj[25],"frontband1"); }
    if (lang == 3) { name_object(Obj[25],"frontband1"); }
    if (lang == 4) { name_object(Obj[25],"frontband1"); }
    if (lang == 5) { name_object(Obj[25],"frontband1"); }
    if (lang == 6) { name_object(Obj[25],"frontband1"); }
    }

  //Object gathers1
  if (HideObj[30] == 0)
    {

  Obj[30] = newobject("poly");
  current_point=addpoint(x[319],y[319],"XARC_START");
  current_point=addpoint(x[320],y[320],"XARC_CORNER");
  current_point=addpoint(x[321],y[321],"OPEN");
    if (lang == 0) { name_object(Obj[30],"gathers1"); }
    if (lang == 1) { name_object(Obj[30],"gathers1"); }
    if (lang == 2) { name_object(Obj[30],"gathers1"); }
    if (lang == 3) { name_object(Obj[30],"gathers1"); }
    if (lang == 4) { name_object(Obj[30],"gathers1"); }
    if (lang == 5) { name_object(Obj[30],"gathers1"); }
    if (lang == 6) { name_object(Obj[30],"gathers1"); }
    }

  //Object gathers2
  if (HideObj[31] == 0)
    {

  Obj[31] = newobject("poly");
  current_point=addpoint(x[322],y[322],"XARC_START");
  current_point=addpoint(x[323],y[323],"XARC_CORNER");
  current_point=addpoint(x[324],y[324],"OPEN");
    if (lang == 0) { name_object(Obj[31],"gathers2"); }
    if (lang == 1) { name_object(Obj[31],"gathers2"); }
    if (lang == 2) { name_object(Obj[31],"gathers2"); }
    if (lang == 3) { name_object(Obj[31],"gathers2"); }
    if (lang == 4) { name_object(Obj[31],"gathers2"); }
    if (lang == 5) { name_object(Obj[31],"gathers2"); }
    if (lang == 6) { name_object(Obj[31],"gathers2"); }
    }

  //Object txt3a
  if (HideObj[32] == 0)
    {
  if (lang == 0)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[32] = newobject("Text","Gather",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[325],(y[325]+0.75),"LINE");
    if (lang == 0) { name_object(Obj[32],"txt3a"); }
    if (lang == 1) { name_object(Obj[32],"txt3a"); }
    if (lang == 2) { name_object(Obj[32],"txt3a"); }
    if (lang == 3) { name_object(Obj[32],"txt3a"); }
    if (lang == 4) { name_object(Obj[32],"txt3a"); }
    if (lang == 5) { name_object(Obj[32],"txt3a"); }
    if (lang == 6) { name_object(Obj[32],"txt3a"); }
    }

  //Object txt3b
  if (HideObj[34] == 0)
    {
  if (lang == 0)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[34] = newobject("Text","CF grainline ",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[329],(y[329]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[34],"txt3b"); }
    if (lang == 1) { name_object(Obj[34],"txt3b"); }
    if (lang == 2) { name_object(Obj[34],"txt3b"); }
    if (lang == 3) { name_object(Obj[34],"txt3b"); }
    if (lang == 4) { name_object(Obj[34],"txt3b"); }
    if (lang == 5) { name_object(Obj[34],"txt3b"); }
    if (lang == 6) { name_object(Obj[34],"txt3b"); }
    }

  //Object txt3c
  if (HideObj[35] == 0)
    {
  if (lang == 0)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[35] = newobject("Text","Overlap Here",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[330],(y[330]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[35],"txt3c"); }
    if (lang == 1) { name_object(Obj[35],"txt3c"); }
    if (lang == 2) { name_object(Obj[35],"txt3c"); }
    if (lang == 3) { name_object(Obj[35],"txt3c"); }
    if (lang == 4) { name_object(Obj[35],"txt3c"); }
    if (lang == 5) { name_object(Obj[35],"txt3c"); }
    if (lang == 6) { name_object(Obj[35],"txt3c"); }
    }

  //Object  txt1c
  if (HideObj[38] == 0)
    {
  if (lang == 0)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[38] = newobject("Text","Lower Front",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-2),"LINE");
    if (lang == 0) { name_object(Obj[38]," txt1c"); }
    if (lang == 1) { name_object(Obj[38]," txt1c"); }
    if (lang == 2) { name_object(Obj[38]," txt1c"); }
    if (lang == 3) { name_object(Obj[38]," txt1c"); }
    if (lang == 4) { name_object(Obj[38]," txt1c"); }
    if (lang == 5) { name_object(Obj[38]," txt1c"); }
    if (lang == 6) { name_object(Obj[38]," txt1c"); }
    }

  //Object txt1d
  if (HideObj[39] == 0)
    {
  if (lang == 0)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[39] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[5]+2),(y[5]+-3),"LINE");
    if (lang == 0) { name_object(Obj[39],"txt1d"); }
    if (lang == 1) { name_object(Obj[39],"txt1d"); }
    if (lang == 2) { name_object(Obj[39],"txt1d"); }
    if (lang == 3) { name_object(Obj[39],"txt1d"); }
    if (lang == 4) { name_object(Obj[39],"txt1d"); }
    if (lang == 5) { name_object(Obj[39],"txt1d"); }
    if (lang == 6) { name_object(Obj[39],"txt1d"); }
    }

  //Object txt1e
  if (HideObj[40] == 0)
    {
  if (lang == 0)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[40] = newobject("Text","Empire Cross Over Dress 1",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[148]+2),y[148],"LINE");
    if (lang == 0) { name_object(Obj[40],"txt1e"); }
    if (lang == 1) { name_object(Obj[40],"txt1e"); }
    if (lang == 2) { name_object(Obj[40],"txt1e"); }
    if (lang == 3) { name_object(Obj[40],"txt1e"); }
    if (lang == 4) { name_object(Obj[40],"txt1e"); }
    if (lang == 5) { name_object(Obj[40],"txt1e"); }
    if (lang == 6) { name_object(Obj[40],"txt1e"); }
    }

  //Object wrapCfline
  if (HideObj[52] == 0)
    {

  Obj[52] = newobject("poly");
  current_point=addpoint(x[276],y[276],"LINE");
  current_point=addpoint(x[4],y[4],"OPEN");
    if (lang == 0) { name_object(Obj[52],"wrapCfline"); }
    if (lang == 1) { name_object(Obj[52],"wrapCfline"); }
    if (lang == 2) { name_object(Obj[52],"wrapCfline"); }
    if (lang == 3) { name_object(Obj[52],"wrapCfline"); }
    if (lang == 4) { name_object(Obj[52],"wrapCfline"); }
    if (lang == 5) { name_object(Obj[52],"wrapCfline"); }
    if (lang == 6) { name_object(Obj[52],"wrapCfline"); }
    }

  //Object txt5a
  if (HideObj[41] == 0)
    {
  if (lang == 0)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[41] = newobject("Text","CF Fold Remove seam",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[3],(y[3]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[41],"txt5a"); }
    if (lang == 1) { name_object(Obj[41],"txt5a"); }
    if (lang == 2) { name_object(Obj[41],"txt5a"); }
    if (lang == 3) { name_object(Obj[41],"txt5a"); }
    if (lang == 4) { name_object(Obj[41],"txt5a"); }
    if (lang == 5) { name_object(Obj[41],"txt5a"); }
    if (lang == 6) { name_object(Obj[41],"txt5a"); }
    }

  //Object txt 5b
  if (HideObj[42] == 0)
    {
  if (lang == 0)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[42] = newobject("Text","Empire Cross Over Dress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[42],"txt 5b"); }
    if (lang == 1) { name_object(Obj[42],"txt 5b"); }
    if (lang == 2) { name_object(Obj[42],"txt 5b"); }
    if (lang == 3) { name_object(Obj[42],"txt 5b"); }
    if (lang == 4) { name_object(Obj[42],"txt 5b"); }
    if (lang == 5) { name_object(Obj[42],"txt 5b"); }
    if (lang == 6) { name_object(Obj[42],"txt 5b"); }
    }

  //Object txt5c
  if (HideObj[43] == 0)
    {
  if (lang == 0)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[43] = newobject("Text","Front Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),y[267],"LINE");
    if (lang == 0) { name_object(Obj[43],"txt5c"); }
    if (lang == 1) { name_object(Obj[43],"txt5c"); }
    if (lang == 2) { name_object(Obj[43],"txt5c"); }
    if (lang == 3) { name_object(Obj[43],"txt5c"); }
    if (lang == 4) { name_object(Obj[43],"txt5c"); }
    if (lang == 5) { name_object(Obj[43],"txt5c"); }
    if (lang == 6) { name_object(Obj[43],"txt5c"); }
    }

  //Object txt5d
  if (HideObj[44] == 0)
    {
  if (lang == 0)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[44] = newobject("Text","Cut 1 on Fold",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[267]+1),(y[267]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[44],"txt5d"); }
    if (lang == 1) { name_object(Obj[44],"txt5d"); }
    if (lang == 2) { name_object(Obj[44],"txt5d"); }
    if (lang == 3) { name_object(Obj[44],"txt5d"); }
    if (lang == 4) { name_object(Obj[44],"txt5d"); }
    if (lang == 5) { name_object(Obj[44],"txt5d"); }
    if (lang == 6) { name_object(Obj[44],"txt5d"); }
    }

  //Object txt5e
  if (HideObj[45] == 0)
    {
  if (lang == 0)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[45] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[246]+1),(y[246]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[45],"txt5e"); }
    if (lang == 1) { name_object(Obj[45],"txt5e"); }
    if (lang == 2) { name_object(Obj[45],"txt5e"); }
    if (lang == 3) { name_object(Obj[45],"txt5e"); }
    if (lang == 4) { name_object(Obj[45],"txt5e"); }
    if (lang == 5) { name_object(Obj[45],"txt5e"); }
    if (lang == 6) { name_object(Obj[45],"txt5e"); }
    }

  //Object txt5g
  if (HideObj[46] == 0)
    {
  if (lang == 0)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[46] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[117],(y[117]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[46],"txt5g"); }
    if (lang == 1) { name_object(Obj[46],"txt5g"); }
    if (lang == 2) { name_object(Obj[46],"txt5g"); }
    if (lang == 3) { name_object(Obj[46],"txt5g"); }
    if (lang == 4) { name_object(Obj[46],"txt5g"); }
    if (lang == 5) { name_object(Obj[46],"txt5g"); }
    if (lang == 6) { name_object(Obj[46],"txt5g"); }
    }

  //Object txt5h
  if (HideObj[47] == 0)
    {
  if (lang == 0)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[47] = newobject("Text","Empire Cross Over Cress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[47],"txt5h"); }
    if (lang == 1) { name_object(Obj[47],"txt5h"); }
    if (lang == 2) { name_object(Obj[47],"txt5h"); }
    if (lang == 3) { name_object(Obj[47],"txt5h"); }
    if (lang == 4) { name_object(Obj[47],"txt5h"); }
    if (lang == 5) { name_object(Obj[47],"txt5h"); }
    if (lang == 6) { name_object(Obj[47],"txt5h"); }
    }

  //Object txt5i
  if (HideObj[48] == 0)
    {
  if (lang == 0)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[48] = newobject("Text","Back Band",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),y[271],"LINE");
    if (lang == 0) { name_object(Obj[48],"txt5i"); }
    if (lang == 1) { name_object(Obj[48],"txt5i"); }
    if (lang == 2) { name_object(Obj[48],"txt5i"); }
    if (lang == 3) { name_object(Obj[48],"txt5i"); }
    if (lang == 4) { name_object(Obj[48],"txt5i"); }
    if (lang == 5) { name_object(Obj[48],"txt5i"); }
    if (lang == 6) { name_object(Obj[48],"txt5i"); }
    }

  //Object txt5j
  if (HideObj[49] == 0)
    {
  if (lang == 0)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[49] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[271]+1),(y[271]+-0.5),"LINE");
    if (lang == 0) { name_object(Obj[49],"txt5j"); }
    if (lang == 1) { name_object(Obj[49],"txt5j"); }
    if (lang == 2) { name_object(Obj[49],"txt5j"); }
    if (lang == 3) { name_object(Obj[49],"txt5j"); }
    if (lang == 4) { name_object(Obj[49],"txt5j"); }
    if (lang == 5) { name_object(Obj[49],"txt5j"); }
    if (lang == 6) { name_object(Obj[49],"txt5j"); }
    }

  //Object txt5k
  if (HideObj[50] == 0)
    {
  if (lang == 0)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[50] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[69]+0.5),(y[69]+0.25),"LINE");
    if (lang == 0) { name_object(Obj[50],"txt5k"); }
    if (lang == 1) { name_object(Obj[50],"txt5k"); }
    if (lang == 2) { name_object(Obj[50],"txt5k"); }
    if (lang == 3) { name_object(Obj[50],"txt5k"); }
    if (lang == 4) { name_object(Obj[50],"txt5k"); }
    if (lang == 5) { name_object(Obj[50],"txt5k"); }
    if (lang == 6) { name_object(Obj[50],"txt5k"); }
    }

  //Object backbandgrainline
  if (HideObj[51] == 0)
    {

  Obj[51] = newobject("poly");
  current_point=addpoint(x[141],y[141],"LINE");
  current_point=addpoint(x[332],y[332],"OPEN");
    if (lang == 0) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 1) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 2) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 3) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 4) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 5) { name_object(Obj[51],"backbandgrainline"); }
    if (lang == 6) { name_object(Obj[51],"backbandgrainline"); }
    }
  offset_mark(0, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(1, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(8, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(9, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(24, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(25, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow1View0()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow1View0");
    }
  Flow1View0Points();
  }

Flow1View0Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //6l
  x[333]= (x[94]+x[226])/2;
y[333]=(y[94]+y[226])/2;

  //6m
  x[334]= (x[226]+x[143])/2;
y[334]=(y[226]+y[143])/2;

  //6n
  x[335]= (x[67]+x[146])/2;
y[335]=(y[67]+y[146])/2;

  //6o
  x[336]= (x[96]+x[94])/2;
y[336]=(y[96]+y[94])/2;

  //6p
  x[337]= (x[95]+x[94])/2;
y[337]=(y[95]+y[94])/2;

  //6q
  x[338]= (x[163]+x[44])/2;
y[338]=(y[163]+y[44])/2;

  //6r
  x[339] = x[338];
y[339] = y[5];

  //6s
  x[340]= (x[162]+x[164])/2;
y[340]=(y[162]+y[164])/2;

  //6t
  x[341] = x[340];
y[341] = y[5];

  //6u
  x[342]= (x[161]+x[90])/2;
y[342]=(y[161]+y[90])/2;

  //6v
  x[343]= (x[160]+x[95])/2;
y[343]=(y[160]+y[95])/2;

  //6w
  x[344] = x[342];
y[344] = y[5];

  //6x
  x[345] = x[343];
y[345] = y[5];

  //MoveStart(9)
  x[346]=x[0]+12.1695797086938;
y[346]=y[0]+-15.5926532414988;
  //MoveEnd(9)
  x[347]=x[0]+14.0217911490621;
y[347]=y[0]+-15.0478851708022;
  //2v(3)
  x[348] = x[50] + x[347] - x[346] ;
y[348] = y[50] + y[347] - y[346] ;

  //4v(3)
  x[349] = x[137] + x[347] - x[346] ;
y[349] = y[137] + y[347] - y[346] ;

  //2s(5)
  x[350] = x[47] + x[347] - x[346] ;
y[350] = y[47] + y[347] - y[346] ;

  //1b(2)
  x[351] = x[3] + x[347] - x[346] ;
y[351] = y[3] + y[347] - y[346] ;

  //1c(2)
  x[352] = x[4] + x[347] - x[346] ;
y[352] = y[4] + y[347] - y[346] ;

  //5f(2)
  x[353] = x[147] + x[347] - x[346] ;
y[353] = y[147] + y[347] - y[346] ;

  //5e(2)
  x[354] = x[146] + x[347] - x[346] ;
y[354] = y[146] + y[347] - y[346] ;

  //6n(2)
  x[355] = x[335] + x[347] - x[346] ;
y[355] = y[335] + y[347] - y[346] ;

  //2m(2)
  x[356] = x[41] + x[347] - x[346] ;
y[356] = y[41] + y[347] - y[346] ;

  //3b(2)
  x[357] = x[67] + x[347] - x[346] ;
y[357] = y[67] + y[347] - y[346] ;

  //2p(2)
  x[358] = x[44] + x[347] - x[346] ;
y[358] = y[44] + y[347] - y[346] ;

  //1c(3)
  x[359] = x[4] + x[347] - x[346] ;
y[359] = y[4] + y[347] - y[346] ;

  //2m(3)
  x[360] = x[41] + x[347] - x[346] ;
y[360] = y[41] + y[347] - y[346] ;

  //2m(4)
  x[361] = x[41] + x[347] - x[346] ;
y[361] = y[41] + y[347] - y[346] ;

  //2m(5)
  x[362] = x[41] + x[347] - x[346] ;
y[362] = y[41] + y[347] - y[346] ;

  //MoveStart(10)
  x[363]=x[0]+3.39881377047958;
y[363]=y[0]+-14.817871985397;
  //MoveEnd(10)
  x[364]=x[0]+1.65555594425066;
y[364]=y[0]+-13.9825609436623;
  //4f(7)
  x[365] = x[98] + x[364] - x[363] ;
y[365] = y[98] + y[364] - y[363] ;

  //4u(7)
  x[366] = x[136] + x[364] - x[363] ;
y[366] = y[136] + y[364] - y[363] ;

  //5x(7)
  x[367] = x[166] + x[364] - x[363] ;
y[367] = y[166] + y[364] - y[363] ;

  //2w(7)
  x[368] = x[51] + x[364] - x[363] ;
y[368] = y[51] + y[364] - y[363] ;

  //2o(5)
  x[369] = x[43] + x[364] - x[363] ;
y[369] = y[43] + y[364] - y[363] ;

  //3b(3)
  x[370] = x[67] + x[364] - x[363] ;
y[370] = y[67] + y[364] - y[363] ;

  //2m(6)
  x[371] = x[41] + x[364] - x[363] ;
y[371] = y[41] + y[364] - y[363] ;

  //6n(3)
  x[372] = x[335] + x[364] - x[363] ;
y[372] = y[335] + y[364] - y[363] ;

  //5e(3)
  x[373] = x[146] + x[364] - x[363] ;
y[373] = y[146] + y[364] - y[363] ;

  //3a6(2)
  x[374] = x[172] + x[364] - x[363] ;
y[374] = y[172] + y[364] - y[363] ;

  //5d(4)
  x[375] = x[145] + x[364] - x[363] ;
y[375] = y[145] + y[364] - y[363] ;

  //2f1(3)
  x[376] = x[209] + x[364] - x[363] ;
y[376] = y[209] + y[364] - y[363] ;

  //2f(4)
  x[377] = x[33] + x[364] - x[363] ;
y[377] = y[33] + y[364] - y[363] ;

  //2l(4)
  x[378] = x[39] + x[364] - x[363] ;
y[378] = y[39] + y[364] - y[363] ;

  //2j(6)
  x[379] = x[37] + x[364] - x[363] ;
y[379] = y[37] + y[364] - y[363] ;

  //2f(5)
  x[380] = x[33] + x[364] - x[363] ;
y[380] = y[33] + y[364] - y[363] ;

  //2f(6)
  x[381] = x[33] + x[364] - x[363] ;
y[381] = y[33] + y[364] - y[363] ;

  //2f(7)
  x[382] = x[33] + x[364] - x[363] ;
y[382] = y[33] + y[364] - y[363] ;

  //6s(2)
  x[383] = x[340] + x[364] - x[363] ;
y[383] = y[340] + y[364] - y[363] ;

  //6t(2)
  x[384] = x[341] + x[364] - x[363] ;
y[384] = y[341] + y[364] - y[363] ;

  //3v1
  x[385] = x[349];
y[385] = y[362];

  }

Flow1View0Objects()
{

  //Object CenterFront Panel
  if (HideObj[53] == 0)
    {

  Obj[53] = newobject("poly");
  current_point=addpoint(x[348],y[348],"LINE");
  current_point=addpoint(x[349],y[349],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[350],y[350],"LINE");
  current_point=addpoint(x[351],y[351],"LINE");
  current_point=addpoint(x[352],y[352],"LINE");
  current_point=addpoint(x[353],y[353],"LINE");
  current_point=addpoint(x[354],y[354],"LINE");
  current_point=addpoint(x[355],y[355],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[356],y[356],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[357],y[357],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[358],y[358],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 1) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 2) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 3) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 4) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 5) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 6) { name_object(Obj[53],"CenterFront Panel"); }
    }

  //Object SideFrontPanel
  if (HideObj[54] == 0)
    {

  Obj[54] = newobject("poly");
  current_point=addpoint(x[365],y[365],"LINE");
  current_point=addpoint(x[366],y[366],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[367],y[367],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[368],y[368],"LINE");
  current_point=addpoint(x[369],y[369],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[370],y[370],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[371],y[371],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[372],y[372],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[373],y[373],"LINE");
  current_point=addpoint(x[374],y[374],"LINE");
  current_point=addpoint(x[375],y[375],"LINE");
  current_point=addpoint(x[376],y[376],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[377],y[377],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[378],y[378],"XARC_CORNER");
  current_point=addpoint(x[379],y[379],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 1) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 2) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 3) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 4) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 5) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 6) { name_object(Obj[54],"SideFrontPanel"); }
    }

  //Object SideBackPanel
  if (HideObj[55] == 0)
    {

  Obj[55] = newobject("poly");
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[97],y[97],"LINE");
  current_point=addpoint(x[90],y[90],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"LINE");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[171],y[171],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[334],y[334],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[226],y[226],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[333],y[333],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[94],y[94],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[336],y[336],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[96],y[96],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 1) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 2) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 3) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 4) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 5) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 6) { name_object(Obj[55],"SideBackPanel"); }
    }

  //Object CenterBackPanel
  if (HideObj[56] == 0)
    {

  Obj[56] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[337],y[337],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[94],y[94],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[333],y[333],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[226],y[226],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[334],y[334],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[151],y[151],"LINE");
  current_point=addpoint(x[152],y[152],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  current_point=addpoint(x[271],y[271],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
    if (lang == 0) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 1) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 2) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 3) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 4) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 5) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 6) { name_object(Obj[56],"CenterBackPanel"); }
    }

  //Object CfPanelSlit
  if (HideObj[57] == 0)
    {

  Obj[57] = newobject("poly");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[155],y[155],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[142],y[142],"OPEN");
    if (lang == 0) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 1) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 2) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 3) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 4) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 5) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 6) { name_object(Obj[57],"CfPanelSlit"); }
    }

  //Object txt4a
  if (HideObj[58] == 0)
    {
  if (lang == 0)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),y[148],"LINE");
    if (lang == 0) { name_object(Obj[58],"txt4a"); }
    if (lang == 1) { name_object(Obj[58],"txt4a"); }
    if (lang == 2) { name_object(Obj[58],"txt4a"); }
    if (lang == 3) { name_object(Obj[58],"txt4a"); }
    if (lang == 4) { name_object(Obj[58],"txt4a"); }
    if (lang == 5) { name_object(Obj[58],"txt4a"); }
    if (lang == 6) { name_object(Obj[58],"txt4a"); }
    }

  //Object txt4b
  if (HideObj[59] == 0)
    {
  if (lang == 0)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),(y[148]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[59],"txt4b"); }
    if (lang == 1) { name_object(Obj[59],"txt4b"); }
    if (lang == 2) { name_object(Obj[59],"txt4b"); }
    if (lang == 3) { name_object(Obj[59],"txt4b"); }
    if (lang == 4) { name_object(Obj[59],"txt4b"); }
    if (lang == 5) { name_object(Obj[59],"txt4b"); }
    if (lang == 6) { name_object(Obj[59],"txt4b"); }
    }

  //Object txt4c
  if (HideObj[60] == 0)
    {
  if (lang == 0)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),(y[148]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[60],"txt4c"); }
    if (lang == 1) { name_object(Obj[60],"txt4c"); }
    if (lang == 2) { name_object(Obj[60],"txt4c"); }
    if (lang == 3) { name_object(Obj[60],"txt4c"); }
    if (lang == 4) { name_object(Obj[60],"txt4c"); }
    if (lang == 5) { name_object(Obj[60],"txt4c"); }
    if (lang == 6) { name_object(Obj[60],"txt4c"); }
    }

  //Object txt4d
  if (HideObj[61] == 0)
    {
  if (lang == 0)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[61],"txt4d"); }
    if (lang == 1) { name_object(Obj[61],"txt4d"); }
    if (lang == 2) { name_object(Obj[61],"txt4d"); }
    if (lang == 3) { name_object(Obj[61],"txt4d"); }
    if (lang == 4) { name_object(Obj[61],"txt4d"); }
    if (lang == 5) { name_object(Obj[61],"txt4d"); }
    if (lang == 6) { name_object(Obj[61],"txt4d"); }
    }

  //Object txt4e
  if (HideObj[62] == 0)
    {
  if (lang == 0)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-1),"LINE");
    if (lang == 0) { name_object(Obj[62],"txt4e"); }
    if (lang == 1) { name_object(Obj[62],"txt4e"); }
    if (lang == 2) { name_object(Obj[62],"txt4e"); }
    if (lang == 3) { name_object(Obj[62],"txt4e"); }
    if (lang == 4) { name_object(Obj[62],"txt4e"); }
    if (lang == 5) { name_object(Obj[62],"txt4e"); }
    if (lang == 6) { name_object(Obj[62],"txt4e"); }
    }

  //Object txt4f
  if (HideObj[63] == 0)
    {
  if (lang == 0)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[63],"txt4f"); }
    if (lang == 1) { name_object(Obj[63],"txt4f"); }
    if (lang == 2) { name_object(Obj[63],"txt4f"); }
    if (lang == 3) { name_object(Obj[63],"txt4f"); }
    if (lang == 4) { name_object(Obj[63],"txt4f"); }
    if (lang == 5) { name_object(Obj[63],"txt4f"); }
    if (lang == 6) { name_object(Obj[63],"txt4f"); }
    }

  //Object txt4g
  if (HideObj[64] == 0)
    {
  if (lang == 0)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-2.24),"LINE");
    if (lang == 0) { name_object(Obj[64],"txt4g"); }
    if (lang == 1) { name_object(Obj[64],"txt4g"); }
    if (lang == 2) { name_object(Obj[64],"txt4g"); }
    if (lang == 3) { name_object(Obj[64],"txt4g"); }
    if (lang == 4) { name_object(Obj[64],"txt4g"); }
    if (lang == 5) { name_object(Obj[64],"txt4g"); }
    if (lang == 6) { name_object(Obj[64],"txt4g"); }
    }

  //Object txt4h
  if (HideObj[65] == 0)
    {
  if (lang == 0)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[380]+1),(y[380]+-1),"LINE");
    if (lang == 0) { name_object(Obj[65],"txt4h"); }
    if (lang == 1) { name_object(Obj[65],"txt4h"); }
    if (lang == 2) { name_object(Obj[65],"txt4h"); }
    if (lang == 3) { name_object(Obj[65],"txt4h"); }
    if (lang == 4) { name_object(Obj[65],"txt4h"); }
    if (lang == 5) { name_object(Obj[65],"txt4h"); }
    if (lang == 6) { name_object(Obj[65],"txt4h"); }
    }

  //Object txt4i
  if (HideObj[66] == 0)
    {
  if (lang == 0)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[381]+1),(y[381]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[66],"txt4i"); }
    if (lang == 1) { name_object(Obj[66],"txt4i"); }
    if (lang == 2) { name_object(Obj[66],"txt4i"); }
    if (lang == 3) { name_object(Obj[66],"txt4i"); }
    if (lang == 4) { name_object(Obj[66],"txt4i"); }
    if (lang == 5) { name_object(Obj[66],"txt4i"); }
    if (lang == 6) { name_object(Obj[66],"txt4i"); }
    }

  //Object txt4j
  if (HideObj[67] == 0)
    {
  if (lang == 0)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[382]+1),(y[382]+-2.5),"LINE");
    if (lang == 0) { name_object(Obj[67],"txt4j"); }
    if (lang == 1) { name_object(Obj[67],"txt4j"); }
    if (lang == 2) { name_object(Obj[67],"txt4j"); }
    if (lang == 3) { name_object(Obj[67],"txt4j"); }
    if (lang == 4) { name_object(Obj[67],"txt4j"); }
    if (lang == 5) { name_object(Obj[67],"txt4j"); }
    if (lang == 6) { name_object(Obj[67],"txt4j"); }
    }

  //Object txt4k
  if (HideObj[68] == 0)
    {
  if (lang == 0)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[359],(y[359]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[68],"txt4k"); }
    if (lang == 1) { name_object(Obj[68],"txt4k"); }
    if (lang == 2) { name_object(Obj[68],"txt4k"); }
    if (lang == 3) { name_object(Obj[68],"txt4k"); }
    if (lang == 4) { name_object(Obj[68],"txt4k"); }
    if (lang == 5) { name_object(Obj[68],"txt4k"); }
    if (lang == 6) { name_object(Obj[68],"txt4k"); }
    }

  //Object txt4l
  if (HideObj[69] == 0)
    {
  if (lang == 0)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint(x[360],(y[360]+-1),"LINE");
    if (lang == 0) { name_object(Obj[69],"txt4l"); }
    if (lang == 1) { name_object(Obj[69],"txt4l"); }
    if (lang == 2) { name_object(Obj[69],"txt4l"); }
    if (lang == 3) { name_object(Obj[69],"txt4l"); }
    if (lang == 4) { name_object(Obj[69],"txt4l"); }
    if (lang == 5) { name_object(Obj[69],"txt4l"); }
    if (lang == 6) { name_object(Obj[69],"txt4l"); }
    }

  //Object txt4m
  if (HideObj[70] == 0)
    {
  if (lang == 0)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[361]+0.5),(y[361]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[70],"txt4m"); }
    if (lang == 1) { name_object(Obj[70],"txt4m"); }
    if (lang == 2) { name_object(Obj[70],"txt4m"); }
    if (lang == 3) { name_object(Obj[70],"txt4m"); }
    if (lang == 4) { name_object(Obj[70],"txt4m"); }
    if (lang == 5) { name_object(Obj[70],"txt4m"); }
    if (lang == 6) { name_object(Obj[70],"txt4m"); }
    }

  //Object txt4n
  if (HideObj[71] == 0)
    {
  if (lang == 0)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[362]+0.5),(y[362]+-2.5),"LINE");
    if (lang == 0) { name_object(Obj[71],"txt4n"); }
    if (lang == 1) { name_object(Obj[71],"txt4n"); }
    if (lang == 2) { name_object(Obj[71],"txt4n"); }
    if (lang == 3) { name_object(Obj[71],"txt4n"); }
    if (lang == 4) { name_object(Obj[71],"txt4n"); }
    if (lang == 5) { name_object(Obj[71],"txt4n"); }
    if (lang == 6) { name_object(Obj[71],"txt4n"); }
    }

  //Object CBgrainline
  if (HideObj[72] == 0)
    {

  Obj[72] = newobject("poly");
  current_point=addpoint(x[343],y[343],"LINE");
  current_point=addpoint(x[345],y[345],"OPEN");
    if (lang == 0) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 1) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 2) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 3) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 4) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 5) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 6) { name_object(Obj[72],"CBgrainline"); }
    }

  //Object SBgrainline
  if (HideObj[73] == 0)
    {

  Obj[73] = newobject("poly");
  current_point=addpoint(x[344],y[344],"LINE");
  current_point=addpoint(x[342],y[342],"OPEN");
    if (lang == 0) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 1) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 2) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 3) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 4) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 5) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 6) { name_object(Obj[73],"SBgrainline"); }
    }

  //Object SFgrainline
  if (HideObj[74] == 0)
    {

  Obj[74] = newobject("poly");
  current_point=addpoint(x[383],y[383],"LINE");
  current_point=addpoint(x[384],y[384],"OPEN");
    if (lang == 0) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 1) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 2) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 3) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 4) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 5) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 6) { name_object(Obj[74],"SFgrainline"); }
    }

  //Object CfrontGrainline
  if (HideObj[75] == 0)
    {

  Obj[75] = newobject("poly");
  current_point=addpoint(x[349],y[349],"LINE");
  current_point=addpoint(x[385],y[385],"OPEN");
    if (lang == 0) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 1) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 2) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 3) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 4) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 5) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 6) { name_object(Obj[75],"CfrontGrainline"); }
    }

  //Object txt1f
  if (HideObj[76] == 0)
    {
  if (lang == 0)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.2),"LINE");
    if (lang == 0) { name_object(Obj[76],"txt1f"); }
    if (lang == 1) { name_object(Obj[76],"txt1f"); }
    if (lang == 2) { name_object(Obj[76],"txt1f"); }
    if (lang == 3) { name_object(Obj[76],"txt1f"); }
    if (lang == 4) { name_object(Obj[76],"txt1f"); }
    if (lang == 5) { name_object(Obj[76],"txt1f"); }
    if (lang == 6) { name_object(Obj[76],"txt1f"); }
    }

  //Object txt1g
  if (HideObj[77] == 0)
    {
  if (lang == 0)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[143]+1),(y[143]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[77],"txt1g"); }
    if (lang == 1) { name_object(Obj[77],"txt1g"); }
    if (lang == 2) { name_object(Obj[77],"txt1g"); }
    if (lang == 3) { name_object(Obj[77],"txt1g"); }
    if (lang == 4) { name_object(Obj[77],"txt1g"); }
    if (lang == 5) { name_object(Obj[77],"txt1g"); }
    if (lang == 6) { name_object(Obj[77],"txt1g"); }
    }

  //Object txt1h
  if (HideObj[78] == 0)
    {
  if (lang == 0)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[375]+1),(y[375]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[78],"txt1h"); }
    if (lang == 1) { name_object(Obj[78],"txt1h"); }
    if (lang == 2) { name_object(Obj[78],"txt1h"); }
    if (lang == 3) { name_object(Obj[78],"txt1h"); }
    if (lang == 4) { name_object(Obj[78],"txt1h"); }
    if (lang == 5) { name_object(Obj[78],"txt1h"); }
    if (lang == 6) { name_object(Obj[78],"txt1h"); }
    }

  //Object txt1i
  if (HideObj[79] == 0)
    {
  if (lang == 0)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[354]+1),(y[354]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[79],"txt1i"); }
    if (lang == 1) { name_object(Obj[79],"txt1i"); }
    if (lang == 2) { name_object(Obj[79],"txt1i"); }
    if (lang == 3) { name_object(Obj[79],"txt1i"); }
    if (lang == 4) { name_object(Obj[79],"txt1i"); }
    if (lang == 5) { name_object(Obj[79],"txt1i"); }
    if (lang == 6) { name_object(Obj[79],"txt1i"); }
    }
  offset_mark(53, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(54, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(55, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(56, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow1View1()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow1View1");
    }
  Flow1View1Points();
  }

Flow1View1Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //6l
  x[333]= (x[94]+x[226])/2;
y[333]=(y[94]+y[226])/2;

  //6m
  x[334]= (x[226]+x[143])/2;
y[334]=(y[226]+y[143])/2;

  //6n
  x[335]= (x[67]+x[146])/2;
y[335]=(y[67]+y[146])/2;

  //6o
  x[336]= (x[96]+x[94])/2;
y[336]=(y[96]+y[94])/2;

  //6p
  x[337]= (x[95]+x[94])/2;
y[337]=(y[95]+y[94])/2;

  //6q
  x[338]= (x[163]+x[44])/2;
y[338]=(y[163]+y[44])/2;

  //6r
  x[339] = x[338];
y[339] = y[5];

  //6s
  x[340]= (x[162]+x[164])/2;
y[340]=(y[162]+y[164])/2;

  //6t
  x[341] = x[340];
y[341] = y[5];

  //6u
  x[342]= (x[161]+x[90])/2;
y[342]=(y[161]+y[90])/2;

  //6v
  x[343]= (x[160]+x[95])/2;
y[343]=(y[160]+y[95])/2;

  //6w
  x[344] = x[342];
y[344] = y[5];

  //6x
  x[345] = x[343];
y[345] = y[5];

  //MoveStart(9)
  x[346]=x[0]+12.1695797086938;
y[346]=y[0]+-15.5926532414988;
  //MoveEnd(9)
  x[347]=x[0]+14.0217911490621;
y[347]=y[0]+-15.0478851708022;
  //2v(3)
  x[348] = x[50] + x[347] - x[346] ;
y[348] = y[50] + y[347] - y[346] ;

  //4v(3)
  x[349] = x[137] + x[347] - x[346] ;
y[349] = y[137] + y[347] - y[346] ;

  //2s(5)
  x[350] = x[47] + x[347] - x[346] ;
y[350] = y[47] + y[347] - y[346] ;

  //1b(2)
  x[351] = x[3] + x[347] - x[346] ;
y[351] = y[3] + y[347] - y[346] ;

  //1c(2)
  x[352] = x[4] + x[347] - x[346] ;
y[352] = y[4] + y[347] - y[346] ;

  //5f(2)
  x[353] = x[147] + x[347] - x[346] ;
y[353] = y[147] + y[347] - y[346] ;

  //5e(2)
  x[354] = x[146] + x[347] - x[346] ;
y[354] = y[146] + y[347] - y[346] ;

  //6n(2)
  x[355] = x[335] + x[347] - x[346] ;
y[355] = y[335] + y[347] - y[346] ;

  //2m(2)
  x[356] = x[41] + x[347] - x[346] ;
y[356] = y[41] + y[347] - y[346] ;

  //3b(2)
  x[357] = x[67] + x[347] - x[346] ;
y[357] = y[67] + y[347] - y[346] ;

  //2p(2)
  x[358] = x[44] + x[347] - x[346] ;
y[358] = y[44] + y[347] - y[346] ;

  //1c(3)
  x[359] = x[4] + x[347] - x[346] ;
y[359] = y[4] + y[347] - y[346] ;

  //2m(3)
  x[360] = x[41] + x[347] - x[346] ;
y[360] = y[41] + y[347] - y[346] ;

  //2m(4)
  x[361] = x[41] + x[347] - x[346] ;
y[361] = y[41] + y[347] - y[346] ;

  //2m(5)
  x[362] = x[41] + x[347] - x[346] ;
y[362] = y[41] + y[347] - y[346] ;

  //MoveStart(10)
  x[363]=x[0]+3.39881377047958;
y[363]=y[0]+-14.817871985397;
  //MoveEnd(10)
  x[364]=x[0]+1.65555594425066;
y[364]=y[0]+-13.9825609436623;
  //4f(7)
  x[365] = x[98] + x[364] - x[363] ;
y[365] = y[98] + y[364] - y[363] ;

  //4u(7)
  x[366] = x[136] + x[364] - x[363] ;
y[366] = y[136] + y[364] - y[363] ;

  //5x(7)
  x[367] = x[166] + x[364] - x[363] ;
y[367] = y[166] + y[364] - y[363] ;

  //2w(7)
  x[368] = x[51] + x[364] - x[363] ;
y[368] = y[51] + y[364] - y[363] ;

  //2o(5)
  x[369] = x[43] + x[364] - x[363] ;
y[369] = y[43] + y[364] - y[363] ;

  //3b(3)
  x[370] = x[67] + x[364] - x[363] ;
y[370] = y[67] + y[364] - y[363] ;

  //2m(6)
  x[371] = x[41] + x[364] - x[363] ;
y[371] = y[41] + y[364] - y[363] ;

  //6n(3)
  x[372] = x[335] + x[364] - x[363] ;
y[372] = y[335] + y[364] - y[363] ;

  //5e(3)
  x[373] = x[146] + x[364] - x[363] ;
y[373] = y[146] + y[364] - y[363] ;

  //3a6(2)
  x[374] = x[172] + x[364] - x[363] ;
y[374] = y[172] + y[364] - y[363] ;

  //5d(4)
  x[375] = x[145] + x[364] - x[363] ;
y[375] = y[145] + y[364] - y[363] ;

  //2f1(3)
  x[376] = x[209] + x[364] - x[363] ;
y[376] = y[209] + y[364] - y[363] ;

  //2f(4)
  x[377] = x[33] + x[364] - x[363] ;
y[377] = y[33] + y[364] - y[363] ;

  //2l(4)
  x[378] = x[39] + x[364] - x[363] ;
y[378] = y[39] + y[364] - y[363] ;

  //2j(6)
  x[379] = x[37] + x[364] - x[363] ;
y[379] = y[37] + y[364] - y[363] ;

  //2f(5)
  x[380] = x[33] + x[364] - x[363] ;
y[380] = y[33] + y[364] - y[363] ;

  //2f(6)
  x[381] = x[33] + x[364] - x[363] ;
y[381] = y[33] + y[364] - y[363] ;

  //2f(7)
  x[382] = x[33] + x[364] - x[363] ;
y[382] = y[33] + y[364] - y[363] ;

  //6s(2)
  x[383] = x[340] + x[364] - x[363] ;
y[383] = y[340] + y[364] - y[363] ;

  //6t(2)
  x[384] = x[341] + x[364] - x[363] ;
y[384] = y[341] + y[364] - y[363] ;

  //3v1
  x[385] = x[349];
y[385] = y[362];

  }

Flow1View1Objects()
{

  //Object CenterFront Panel
  if (HideObj[53] == 0)
    {

  Obj[53] = newobject("poly");
  current_point=addpoint(x[348],y[348],"LINE");
  current_point=addpoint(x[349],y[349],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[350],y[350],"LINE");
  current_point=addpoint(x[351],y[351],"LINE");
  current_point=addpoint(x[352],y[352],"LINE");
  current_point=addpoint(x[353],y[353],"LINE");
  current_point=addpoint(x[354],y[354],"LINE");
  current_point=addpoint(x[355],y[355],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[356],y[356],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[357],y[357],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[358],y[358],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 1) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 2) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 3) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 4) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 5) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 6) { name_object(Obj[53],"CenterFront Panel"); }
    }

  //Object SideFrontPanel
  if (HideObj[54] == 0)
    {

  Obj[54] = newobject("poly");
  current_point=addpoint(x[365],y[365],"LINE");
  current_point=addpoint(x[366],y[366],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[367],y[367],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[368],y[368],"LINE");
  current_point=addpoint(x[369],y[369],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[370],y[370],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[371],y[371],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[372],y[372],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[373],y[373],"LINE");
  current_point=addpoint(x[374],y[374],"LINE");
  current_point=addpoint(x[375],y[375],"LINE");
  current_point=addpoint(x[376],y[376],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[377],y[377],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[378],y[378],"XARC_CORNER");
  current_point=addpoint(x[379],y[379],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 1) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 2) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 3) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 4) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 5) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 6) { name_object(Obj[54],"SideFrontPanel"); }
    }

  //Object SideBackPanel
  if (HideObj[55] == 0)
    {

  Obj[55] = newobject("poly");
  current_point=addpoint(x[139],y[139],"LINE");
  current_point=addpoint(x[165],y[165],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[140],y[140],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[97],y[97],"LINE");
  current_point=addpoint(x[90],y[90],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"LINE");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[171],y[171],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[334],y[334],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[226],y[226],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[333],y[333],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[94],y[94],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[336],y[336],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[96],y[96],"LINE");
  notch_type(current_point,"NOTCH",0);
    if (lang == 0) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 1) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 2) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 3) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 4) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 5) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 6) { name_object(Obj[55],"SideBackPanel"); }
    }

  //Object CenterBackPanel
  if (HideObj[56] == 0)
    {

  Obj[56] = newobject("poly");
  current_point=addpoint(x[117],y[117],"LINE");
  current_point=addpoint(x[141],y[141],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[138],y[138],"LINE");
  current_point=addpoint(x[95],y[95],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[337],y[337],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[94],y[94],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[333],y[333],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[226],y[226],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[334],y[334],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[151],y[151],"LINE");
  current_point=addpoint(x[152],y[152],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[69],y[69],"LINE");
  current_point=addpoint(x[271],y[271],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
    if (lang == 0) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 1) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 2) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 3) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 4) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 5) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 6) { name_object(Obj[56],"CenterBackPanel"); }
    }

  //Object CfPanelSlit
  if (HideObj[57] == 0)
    {

  Obj[57] = newobject("poly");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[155],y[155],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[142],y[142],"OPEN");
    if (lang == 0) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 1) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 2) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 3) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 4) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 5) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 6) { name_object(Obj[57],"CfPanelSlit"); }
    }

  //Object txt4a
  if (HideObj[58] == 0)
    {
  if (lang == 0)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),y[148],"LINE");
    if (lang == 0) { name_object(Obj[58],"txt4a"); }
    if (lang == 1) { name_object(Obj[58],"txt4a"); }
    if (lang == 2) { name_object(Obj[58],"txt4a"); }
    if (lang == 3) { name_object(Obj[58],"txt4a"); }
    if (lang == 4) { name_object(Obj[58],"txt4a"); }
    if (lang == 5) { name_object(Obj[58],"txt4a"); }
    if (lang == 6) { name_object(Obj[58],"txt4a"); }
    }

  //Object txt4b
  if (HideObj[59] == 0)
    {
  if (lang == 0)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),(y[148]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[59],"txt4b"); }
    if (lang == 1) { name_object(Obj[59],"txt4b"); }
    if (lang == 2) { name_object(Obj[59],"txt4b"); }
    if (lang == 3) { name_object(Obj[59],"txt4b"); }
    if (lang == 4) { name_object(Obj[59],"txt4b"); }
    if (lang == 5) { name_object(Obj[59],"txt4b"); }
    if (lang == 6) { name_object(Obj[59],"txt4b"); }
    }

  //Object txt4c
  if (HideObj[60] == 0)
    {
  if (lang == 0)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),(y[148]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[60],"txt4c"); }
    if (lang == 1) { name_object(Obj[60],"txt4c"); }
    if (lang == 2) { name_object(Obj[60],"txt4c"); }
    if (lang == 3) { name_object(Obj[60],"txt4c"); }
    if (lang == 4) { name_object(Obj[60],"txt4c"); }
    if (lang == 5) { name_object(Obj[60],"txt4c"); }
    if (lang == 6) { name_object(Obj[60],"txt4c"); }
    }

  //Object txt4d
  if (HideObj[61] == 0)
    {
  if (lang == 0)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[61],"txt4d"); }
    if (lang == 1) { name_object(Obj[61],"txt4d"); }
    if (lang == 2) { name_object(Obj[61],"txt4d"); }
    if (lang == 3) { name_object(Obj[61],"txt4d"); }
    if (lang == 4) { name_object(Obj[61],"txt4d"); }
    if (lang == 5) { name_object(Obj[61],"txt4d"); }
    if (lang == 6) { name_object(Obj[61],"txt4d"); }
    }

  //Object txt4e
  if (HideObj[62] == 0)
    {
  if (lang == 0)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-1),"LINE");
    if (lang == 0) { name_object(Obj[62],"txt4e"); }
    if (lang == 1) { name_object(Obj[62],"txt4e"); }
    if (lang == 2) { name_object(Obj[62],"txt4e"); }
    if (lang == 3) { name_object(Obj[62],"txt4e"); }
    if (lang == 4) { name_object(Obj[62],"txt4e"); }
    if (lang == 5) { name_object(Obj[62],"txt4e"); }
    if (lang == 6) { name_object(Obj[62],"txt4e"); }
    }

  //Object txt4f
  if (HideObj[63] == 0)
    {
  if (lang == 0)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[63],"txt4f"); }
    if (lang == 1) { name_object(Obj[63],"txt4f"); }
    if (lang == 2) { name_object(Obj[63],"txt4f"); }
    if (lang == 3) { name_object(Obj[63],"txt4f"); }
    if (lang == 4) { name_object(Obj[63],"txt4f"); }
    if (lang == 5) { name_object(Obj[63],"txt4f"); }
    if (lang == 6) { name_object(Obj[63],"txt4f"); }
    }

  //Object txt4g
  if (HideObj[64] == 0)
    {
  if (lang == 0)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-2.24),"LINE");
    if (lang == 0) { name_object(Obj[64],"txt4g"); }
    if (lang == 1) { name_object(Obj[64],"txt4g"); }
    if (lang == 2) { name_object(Obj[64],"txt4g"); }
    if (lang == 3) { name_object(Obj[64],"txt4g"); }
    if (lang == 4) { name_object(Obj[64],"txt4g"); }
    if (lang == 5) { name_object(Obj[64],"txt4g"); }
    if (lang == 6) { name_object(Obj[64],"txt4g"); }
    }

  //Object txt4h
  if (HideObj[65] == 0)
    {
  if (lang == 0)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[380]+1),(y[380]+-1),"LINE");
    if (lang == 0) { name_object(Obj[65],"txt4h"); }
    if (lang == 1) { name_object(Obj[65],"txt4h"); }
    if (lang == 2) { name_object(Obj[65],"txt4h"); }
    if (lang == 3) { name_object(Obj[65],"txt4h"); }
    if (lang == 4) { name_object(Obj[65],"txt4h"); }
    if (lang == 5) { name_object(Obj[65],"txt4h"); }
    if (lang == 6) { name_object(Obj[65],"txt4h"); }
    }

  //Object txt4i
  if (HideObj[66] == 0)
    {
  if (lang == 0)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[381]+1),(y[381]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[66],"txt4i"); }
    if (lang == 1) { name_object(Obj[66],"txt4i"); }
    if (lang == 2) { name_object(Obj[66],"txt4i"); }
    if (lang == 3) { name_object(Obj[66],"txt4i"); }
    if (lang == 4) { name_object(Obj[66],"txt4i"); }
    if (lang == 5) { name_object(Obj[66],"txt4i"); }
    if (lang == 6) { name_object(Obj[66],"txt4i"); }
    }

  //Object txt4j
  if (HideObj[67] == 0)
    {
  if (lang == 0)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[382]+1),(y[382]+-2.5),"LINE");
    if (lang == 0) { name_object(Obj[67],"txt4j"); }
    if (lang == 1) { name_object(Obj[67],"txt4j"); }
    if (lang == 2) { name_object(Obj[67],"txt4j"); }
    if (lang == 3) { name_object(Obj[67],"txt4j"); }
    if (lang == 4) { name_object(Obj[67],"txt4j"); }
    if (lang == 5) { name_object(Obj[67],"txt4j"); }
    if (lang == 6) { name_object(Obj[67],"txt4j"); }
    }

  //Object txt4k
  if (HideObj[68] == 0)
    {
  if (lang == 0)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[359],(y[359]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[68],"txt4k"); }
    if (lang == 1) { name_object(Obj[68],"txt4k"); }
    if (lang == 2) { name_object(Obj[68],"txt4k"); }
    if (lang == 3) { name_object(Obj[68],"txt4k"); }
    if (lang == 4) { name_object(Obj[68],"txt4k"); }
    if (lang == 5) { name_object(Obj[68],"txt4k"); }
    if (lang == 6) { name_object(Obj[68],"txt4k"); }
    }

  //Object txt4l
  if (HideObj[69] == 0)
    {
  if (lang == 0)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint(x[360],(y[360]+-1),"LINE");
    if (lang == 0) { name_object(Obj[69],"txt4l"); }
    if (lang == 1) { name_object(Obj[69],"txt4l"); }
    if (lang == 2) { name_object(Obj[69],"txt4l"); }
    if (lang == 3) { name_object(Obj[69],"txt4l"); }
    if (lang == 4) { name_object(Obj[69],"txt4l"); }
    if (lang == 5) { name_object(Obj[69],"txt4l"); }
    if (lang == 6) { name_object(Obj[69],"txt4l"); }
    }

  //Object txt4m
  if (HideObj[70] == 0)
    {
  if (lang == 0)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[361]+0.5),(y[361]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[70],"txt4m"); }
    if (lang == 1) { name_object(Obj[70],"txt4m"); }
    if (lang == 2) { name_object(Obj[70],"txt4m"); }
    if (lang == 3) { name_object(Obj[70],"txt4m"); }
    if (lang == 4) { name_object(Obj[70],"txt4m"); }
    if (lang == 5) { name_object(Obj[70],"txt4m"); }
    if (lang == 6) { name_object(Obj[70],"txt4m"); }
    }

  //Object txt4n
  if (HideObj[71] == 0)
    {
  if (lang == 0)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[362]+0.5),(y[362]+-2.5),"LINE");
    if (lang == 0) { name_object(Obj[71],"txt4n"); }
    if (lang == 1) { name_object(Obj[71],"txt4n"); }
    if (lang == 2) { name_object(Obj[71],"txt4n"); }
    if (lang == 3) { name_object(Obj[71],"txt4n"); }
    if (lang == 4) { name_object(Obj[71],"txt4n"); }
    if (lang == 5) { name_object(Obj[71],"txt4n"); }
    if (lang == 6) { name_object(Obj[71],"txt4n"); }
    }

  //Object CBgrainline
  if (HideObj[72] == 0)
    {

  Obj[72] = newobject("poly");
  current_point=addpoint(x[343],y[343],"LINE");
  current_point=addpoint(x[345],y[345],"OPEN");
    if (lang == 0) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 1) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 2) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 3) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 4) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 5) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 6) { name_object(Obj[72],"CBgrainline"); }
    }

  //Object SBgrainline
  if (HideObj[73] == 0)
    {

  Obj[73] = newobject("poly");
  current_point=addpoint(x[344],y[344],"LINE");
  current_point=addpoint(x[342],y[342],"OPEN");
    if (lang == 0) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 1) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 2) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 3) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 4) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 5) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 6) { name_object(Obj[73],"SBgrainline"); }
    }

  //Object SFgrainline
  if (HideObj[74] == 0)
    {

  Obj[74] = newobject("poly");
  current_point=addpoint(x[383],y[383],"LINE");
  current_point=addpoint(x[384],y[384],"OPEN");
    if (lang == 0) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 1) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 2) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 3) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 4) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 5) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 6) { name_object(Obj[74],"SFgrainline"); }
    }

  //Object CfrontGrainline
  if (HideObj[75] == 0)
    {

  Obj[75] = newobject("poly");
  current_point=addpoint(x[349],y[349],"LINE");
  current_point=addpoint(x[385],y[385],"OPEN");
    if (lang == 0) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 1) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 2) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 3) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 4) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 5) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 6) { name_object(Obj[75],"CfrontGrainline"); }
    }

  //Object txt1f
  if (HideObj[76] == 0)
    {
  if (lang == 0)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.2),"LINE");
    if (lang == 0) { name_object(Obj[76],"txt1f"); }
    if (lang == 1) { name_object(Obj[76],"txt1f"); }
    if (lang == 2) { name_object(Obj[76],"txt1f"); }
    if (lang == 3) { name_object(Obj[76],"txt1f"); }
    if (lang == 4) { name_object(Obj[76],"txt1f"); }
    if (lang == 5) { name_object(Obj[76],"txt1f"); }
    if (lang == 6) { name_object(Obj[76],"txt1f"); }
    }

  //Object txt1g
  if (HideObj[77] == 0)
    {
  if (lang == 0)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[143]+1),(y[143]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[77],"txt1g"); }
    if (lang == 1) { name_object(Obj[77],"txt1g"); }
    if (lang == 2) { name_object(Obj[77],"txt1g"); }
    if (lang == 3) { name_object(Obj[77],"txt1g"); }
    if (lang == 4) { name_object(Obj[77],"txt1g"); }
    if (lang == 5) { name_object(Obj[77],"txt1g"); }
    if (lang == 6) { name_object(Obj[77],"txt1g"); }
    }

  //Object txt1h
  if (HideObj[78] == 0)
    {
  if (lang == 0)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[375]+1),(y[375]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[78],"txt1h"); }
    if (lang == 1) { name_object(Obj[78],"txt1h"); }
    if (lang == 2) { name_object(Obj[78],"txt1h"); }
    if (lang == 3) { name_object(Obj[78],"txt1h"); }
    if (lang == 4) { name_object(Obj[78],"txt1h"); }
    if (lang == 5) { name_object(Obj[78],"txt1h"); }
    if (lang == 6) { name_object(Obj[78],"txt1h"); }
    }

  //Object txt1i
  if (HideObj[79] == 0)
    {
  if (lang == 0)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[354]+1),(y[354]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[79],"txt1i"); }
    if (lang == 1) { name_object(Obj[79],"txt1i"); }
    if (lang == 2) { name_object(Obj[79],"txt1i"); }
    if (lang == 3) { name_object(Obj[79],"txt1i"); }
    if (lang == 4) { name_object(Obj[79],"txt1i"); }
    if (lang == 5) { name_object(Obj[79],"txt1i"); }
    if (lang == 6) { name_object(Obj[79],"txt1i"); }
    }
  offset_mark(53, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(54, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(55, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(56, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow1View2()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow1View2");
    }
  Flow1View2Points();
  }

Flow1View2Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //6l
  x[333]= (x[94]+x[226])/2;
y[333]=(y[94]+y[226])/2;

  //6m
  x[334]= (x[226]+x[143])/2;
y[334]=(y[226]+y[143])/2;

  //6n
  x[335]= (x[67]+x[146])/2;
y[335]=(y[67]+y[146])/2;

  //6o
  x[336]= (x[96]+x[94])/2;
y[336]=(y[96]+y[94])/2;

  //6p
  x[337]= (x[95]+x[94])/2;
y[337]=(y[95]+y[94])/2;

  //6q
  x[338]= (x[163]+x[44])/2;
y[338]=(y[163]+y[44])/2;

  //6r
  x[339] = x[338];
y[339] = y[5];

  //6s
  x[340]= (x[162]+x[164])/2;
y[340]=(y[162]+y[164])/2;

  //6t
  x[341] = x[340];
y[341] = y[5];

  //6u
  x[342]= (x[161]+x[90])/2;
y[342]=(y[161]+y[90])/2;

  //6v
  x[343]= (x[160]+x[95])/2;
y[343]=(y[160]+y[95])/2;

  //6w
  x[344] = x[342];
y[344] = y[5];

  //6x
  x[345] = x[343];
y[345] = y[5];

  //MoveStart(9)
  x[346]=x[0]+12.1695797086938;
y[346]=y[0]+-15.5926532414988;
  //MoveEnd(9)
  x[347]=x[0]+14.0217911490621;
y[347]=y[0]+-15.0478851708022;
  //2v(3)
  x[348] = x[50] + x[347] - x[346] ;
y[348] = y[50] + y[347] - y[346] ;

  //4v(3)
  x[349] = x[137] + x[347] - x[346] ;
y[349] = y[137] + y[347] - y[346] ;

  //2s(5)
  x[350] = x[47] + x[347] - x[346] ;
y[350] = y[47] + y[347] - y[346] ;

  //1b(2)
  x[351] = x[3] + x[347] - x[346] ;
y[351] = y[3] + y[347] - y[346] ;

  //1c(2)
  x[352] = x[4] + x[347] - x[346] ;
y[352] = y[4] + y[347] - y[346] ;

  //5f(2)
  x[353] = x[147] + x[347] - x[346] ;
y[353] = y[147] + y[347] - y[346] ;

  //5e(2)
  x[354] = x[146] + x[347] - x[346] ;
y[354] = y[146] + y[347] - y[346] ;

  //6n(2)
  x[355] = x[335] + x[347] - x[346] ;
y[355] = y[335] + y[347] - y[346] ;

  //2m(2)
  x[356] = x[41] + x[347] - x[346] ;
y[356] = y[41] + y[347] - y[346] ;

  //3b(2)
  x[357] = x[67] + x[347] - x[346] ;
y[357] = y[67] + y[347] - y[346] ;

  //2p(2)
  x[358] = x[44] + x[347] - x[346] ;
y[358] = y[44] + y[347] - y[346] ;

  //1c(3)
  x[359] = x[4] + x[347] - x[346] ;
y[359] = y[4] + y[347] - y[346] ;

  //2m(3)
  x[360] = x[41] + x[347] - x[346] ;
y[360] = y[41] + y[347] - y[346] ;

  //2m(4)
  x[361] = x[41] + x[347] - x[346] ;
y[361] = y[41] + y[347] - y[346] ;

  //2m(5)
  x[362] = x[41] + x[347] - x[346] ;
y[362] = y[41] + y[347] - y[346] ;

  //MoveStart(10)
  x[363]=x[0]+3.39881377047958;
y[363]=y[0]+-14.817871985397;
  //MoveEnd(10)
  x[364]=x[0]+1.65555594425066;
y[364]=y[0]+-13.9825609436623;
  //4f(7)
  x[365] = x[98] + x[364] - x[363] ;
y[365] = y[98] + y[364] - y[363] ;

  //4u(7)
  x[366] = x[136] + x[364] - x[363] ;
y[366] = y[136] + y[364] - y[363] ;

  //5x(7)
  x[367] = x[166] + x[364] - x[363] ;
y[367] = y[166] + y[364] - y[363] ;

  //2w(7)
  x[368] = x[51] + x[364] - x[363] ;
y[368] = y[51] + y[364] - y[363] ;

  //2o(5)
  x[369] = x[43] + x[364] - x[363] ;
y[369] = y[43] + y[364] - y[363] ;

  //3b(3)
  x[370] = x[67] + x[364] - x[363] ;
y[370] = y[67] + y[364] - y[363] ;

  //2m(6)
  x[371] = x[41] + x[364] - x[363] ;
y[371] = y[41] + y[364] - y[363] ;

  //6n(3)
  x[372] = x[335] + x[364] - x[363] ;
y[372] = y[335] + y[364] - y[363] ;

  //5e(3)
  x[373] = x[146] + x[364] - x[363] ;
y[373] = y[146] + y[364] - y[363] ;

  //3a6(2)
  x[374] = x[172] + x[364] - x[363] ;
y[374] = y[172] + y[364] - y[363] ;

  //5d(4)
  x[375] = x[145] + x[364] - x[363] ;
y[375] = y[145] + y[364] - y[363] ;

  //2f1(3)
  x[376] = x[209] + x[364] - x[363] ;
y[376] = y[209] + y[364] - y[363] ;

  //2f(4)
  x[377] = x[33] + x[364] - x[363] ;
y[377] = y[33] + y[364] - y[363] ;

  //2l(4)
  x[378] = x[39] + x[364] - x[363] ;
y[378] = y[39] + y[364] - y[363] ;

  //2j(6)
  x[379] = x[37] + x[364] - x[363] ;
y[379] = y[37] + y[364] - y[363] ;

  //2f(5)
  x[380] = x[33] + x[364] - x[363] ;
y[380] = y[33] + y[364] - y[363] ;

  //2f(6)
  x[381] = x[33] + x[364] - x[363] ;
y[381] = y[33] + y[364] - y[363] ;

  //2f(7)
  x[382] = x[33] + x[364] - x[363] ;
y[382] = y[33] + y[364] - y[363] ;

  //6s(2)
  x[383] = x[340] + x[364] - x[363] ;
y[383] = y[340] + y[364] - y[363] ;

  //6t(2)
  x[384] = x[341] + x[364] - x[363] ;
y[384] = y[341] + y[364] - y[363] ;

  //3v1
  x[385] = x[349];
y[385] = y[362];

  //3x2
  x[386]=x[369];
y[386]=y[369]+Var[64];
  //3x3
  x[387] = x[383];
y[387] = y[386];

  //3x4
  x[388]=x[351];
y[388]=y[351]+Var[64];
  //3x5
  x[389]=x[358];
y[389]=y[358]+Var[64];
  //3x6
  x[390]= (x[389]+x[388])/2;
y[390]=(y[389]+y[388])/2;

  //3x7
  x[391] = x[390];
y[391] = y[385];

  }

Flow1View2Objects()
{

  //Object CenterFront Panel
  if (HideObj[53] == 0)
    {

  Obj[53] = newobject("poly");
  current_point=addpoint(x[352],y[352],"LINE");
  current_point=addpoint(x[353],y[353],"LINE");
  current_point=addpoint(x[354],y[354],"LINE");
  current_point=addpoint(x[355],y[355],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[356],y[356],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[357],y[357],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[389],y[389],"LINE");
  current_point=addpoint(x[390],y[390],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[388],y[388],"LINE");
    if (lang == 0) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 1) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 2) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 3) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 4) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 5) { name_object(Obj[53],"CenterFront Panel"); }
    if (lang == 6) { name_object(Obj[53],"CenterFront Panel"); }
    }

  //Object SideFrontPanel
  if (HideObj[54] == 0)
    {

  Obj[54] = newobject("poly");
  current_point=addpoint(x[370],y[370],"LINE");
  notch_type(current_point,"TAB",0);
  current_point=addpoint(x[371],y[371],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[372],y[372],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[373],y[373],"LINE");
  current_point=addpoint(x[374],y[374],"LINE");
  current_point=addpoint(x[375],y[375],"LINE");
  current_point=addpoint(x[376],y[376],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[377],y[377],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[378],y[378],"XARC_CORNER");
  current_point=addpoint(x[379],y[379],"XARC_START");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[387],y[387],"XARC_CORNER");
  current_point=addpoint(x[386],y[386],"LINE");
    if (lang == 0) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 1) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 2) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 3) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 4) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 5) { name_object(Obj[54],"SideFrontPanel"); }
    if (lang == 6) { name_object(Obj[54],"SideFrontPanel"); }
    }

  //Object SideBackPanel
  if (HideObj[55] == 0)
    {

  Obj[55] = newobject("poly");
  current_point=addpoint(x[90],y[90],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[89],y[89],"LINE");
  current_point=addpoint(x[87],y[87],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[210],y[210],"LINE");
  notch_type(current_point,"DBL_TAB",0);
  current_point=addpoint(x[144],y[144],"LINE");
  current_point=addpoint(x[171],y[171],"LINE");
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[334],y[334],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[226],y[226],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[333],y[333],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[94],y[94],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[336],y[336],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[275],y[275],"XARC_START");
  current_point=addpoint(x[280],y[280],"XARC_CORNER");
    if (lang == 0) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 1) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 2) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 3) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 4) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 5) { name_object(Obj[55],"SideBackPanel"); }
    if (lang == 6) { name_object(Obj[55],"SideBackPanel"); }
    }

  //Object CenterBackPanel
  if (HideObj[56] == 0)
    {

  Obj[56] = newobject("poly");
  current_point=addpoint(x[337],y[337],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[94],y[94],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[333],y[333],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[226],y[226],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[334],y[334],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[143],y[143],"LINE");
  current_point=addpoint(x[142],y[142],"LINE");
  current_point=addpoint(x[151],y[151],"LINE");
  current_point=addpoint(x[152],y[152],"LINE");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[148],y[148],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[70],y[70],"LINE");
  notch_type(current_point,"NOTCH",0);
  current_point=addpoint(x[272],y[272],"LINE");
  current_point=addpoint(x[273],y[273],"LINE");
  notch_type(current_point,"DBL_NOTCH",0);
  current_point=addpoint(x[274],y[274],"LINE");
    if (lang == 0) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 1) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 2) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 3) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 4) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 5) { name_object(Obj[56],"CenterBackPanel"); }
    if (lang == 6) { name_object(Obj[56],"CenterBackPanel"); }
    }

  //Object CfPanelSlit
  if (HideObj[57] == 0)
    {

  Obj[57] = newobject("poly");
  current_point=addpoint(x[149],y[149],"LINE");
  current_point=addpoint(x[155],y[155],"LINE");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[142],y[142],"OPEN");
    if (lang == 0) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 1) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 2) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 3) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 4) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 5) { name_object(Obj[57],"CfPanelSlit"); }
    if (lang == 6) { name_object(Obj[57],"CfPanelSlit"); }
    }

  //Object txt4a
  if (HideObj[58] == 0)
    {
  if (lang == 0)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[58] = newobject("Text","Empire CrossOver Dress 1",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),y[148],"LINE");
    if (lang == 0) { name_object(Obj[58],"txt4a"); }
    if (lang == 1) { name_object(Obj[58],"txt4a"); }
    if (lang == 2) { name_object(Obj[58],"txt4a"); }
    if (lang == 3) { name_object(Obj[58],"txt4a"); }
    if (lang == 4) { name_object(Obj[58],"txt4a"); }
    if (lang == 5) { name_object(Obj[58],"txt4a"); }
    if (lang == 6) { name_object(Obj[58],"txt4a"); }
    }

  //Object txt4b
  if (HideObj[59] == 0)
    {
  if (lang == 0)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[59] = newobject("Text","Center Back",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),(y[148]+-0.75),"LINE");
    if (lang == 0) { name_object(Obj[59],"txt4b"); }
    if (lang == 1) { name_object(Obj[59],"txt4b"); }
    if (lang == 2) { name_object(Obj[59],"txt4b"); }
    if (lang == 3) { name_object(Obj[59],"txt4b"); }
    if (lang == 4) { name_object(Obj[59],"txt4b"); }
    if (lang == 5) { name_object(Obj[59],"txt4b"); }
    if (lang == 6) { name_object(Obj[59],"txt4b"); }
    }

  //Object txt4c
  if (HideObj[60] == 0)
    {
  if (lang == 0)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[60] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[148]+0.5),(y[148]+-1.5),"LINE");
    if (lang == 0) { name_object(Obj[60],"txt4c"); }
    if (lang == 1) { name_object(Obj[60],"txt4c"); }
    if (lang == 2) { name_object(Obj[60],"txt4c"); }
    if (lang == 3) { name_object(Obj[60],"txt4c"); }
    if (lang == 4) { name_object(Obj[60],"txt4c"); }
    if (lang == 5) { name_object(Obj[60],"txt4c"); }
    if (lang == 6) { name_object(Obj[60],"txt4c"); }
    }

  //Object txt4d
  if (HideObj[61] == 0)
    {
  if (lang == 0)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[61] = newobject("Text","Center Back",4.71238898038469,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[69],(y[69]+-2),"LINE");
    if (lang == 0) { name_object(Obj[61],"txt4d"); }
    if (lang == 1) { name_object(Obj[61],"txt4d"); }
    if (lang == 2) { name_object(Obj[61],"txt4d"); }
    if (lang == 3) { name_object(Obj[61],"txt4d"); }
    if (lang == 4) { name_object(Obj[61],"txt4d"); }
    if (lang == 5) { name_object(Obj[61],"txt4d"); }
    if (lang == 6) { name_object(Obj[61],"txt4d"); }
    }

  //Object txt4e
  if (HideObj[62] == 0)
    {
  if (lang == 0)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[62] = newobject("Text","Empire CrossOver Dress1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-1),"LINE");
    if (lang == 0) { name_object(Obj[62],"txt4e"); }
    if (lang == 1) { name_object(Obj[62],"txt4e"); }
    if (lang == 2) { name_object(Obj[62],"txt4e"); }
    if (lang == 3) { name_object(Obj[62],"txt4e"); }
    if (lang == 4) { name_object(Obj[62],"txt4e"); }
    if (lang == 5) { name_object(Obj[62],"txt4e"); }
    if (lang == 6) { name_object(Obj[62],"txt4e"); }
    }

  //Object txt4f
  if (HideObj[63] == 0)
    {
  if (lang == 0)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[63] = newobject("Text","Side Back",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[63],"txt4f"); }
    if (lang == 1) { name_object(Obj[63],"txt4f"); }
    if (lang == 2) { name_object(Obj[63],"txt4f"); }
    if (lang == 3) { name_object(Obj[63],"txt4f"); }
    if (lang == 4) { name_object(Obj[63],"txt4f"); }
    if (lang == 5) { name_object(Obj[63],"txt4f"); }
    if (lang == 6) { name_object(Obj[63],"txt4f"); }
    }

  //Object txt4g
  if (HideObj[64] == 0)
    {
  if (lang == 0)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[64] = newobject("Text","Cut 2",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[94]+0.5),(y[94]+-2.24),"LINE");
    if (lang == 0) { name_object(Obj[64],"txt4g"); }
    if (lang == 1) { name_object(Obj[64],"txt4g"); }
    if (lang == 2) { name_object(Obj[64],"txt4g"); }
    if (lang == 3) { name_object(Obj[64],"txt4g"); }
    if (lang == 4) { name_object(Obj[64],"txt4g"); }
    if (lang == 5) { name_object(Obj[64],"txt4g"); }
    if (lang == 6) { name_object(Obj[64],"txt4g"); }
    }

  //Object txt4h
  if (HideObj[65] == 0)
    {
  if (lang == 0)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[65] = newobject("Text","Empire CrossOver Dress 1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[380]+1),(y[380]+-1),"LINE");
    if (lang == 0) { name_object(Obj[65],"txt4h"); }
    if (lang == 1) { name_object(Obj[65],"txt4h"); }
    if (lang == 2) { name_object(Obj[65],"txt4h"); }
    if (lang == 3) { name_object(Obj[65],"txt4h"); }
    if (lang == 4) { name_object(Obj[65],"txt4h"); }
    if (lang == 5) { name_object(Obj[65],"txt4h"); }
    if (lang == 6) { name_object(Obj[65],"txt4h"); }
    }

  //Object txt4i
  if (HideObj[66] == 0)
    {
  if (lang == 0)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[66] = newobject("Text","Side Front",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[381]+1),(y[381]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[66],"txt4i"); }
    if (lang == 1) { name_object(Obj[66],"txt4i"); }
    if (lang == 2) { name_object(Obj[66],"txt4i"); }
    if (lang == 3) { name_object(Obj[66],"txt4i"); }
    if (lang == 4) { name_object(Obj[66],"txt4i"); }
    if (lang == 5) { name_object(Obj[66],"txt4i"); }
    if (lang == 6) { name_object(Obj[66],"txt4i"); }
    }

  //Object txt4j
  if (HideObj[67] == 0)
    {
  if (lang == 0)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[67] = newobject("Text","Cut 2",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[382]+1),(y[382]+-2.5),"LINE");
    if (lang == 0) { name_object(Obj[67],"txt4j"); }
    if (lang == 1) { name_object(Obj[67],"txt4j"); }
    if (lang == 2) { name_object(Obj[67],"txt4j"); }
    if (lang == 3) { name_object(Obj[67],"txt4j"); }
    if (lang == 4) { name_object(Obj[67],"txt4j"); }
    if (lang == 5) { name_object(Obj[67],"txt4j"); }
    if (lang == 6) { name_object(Obj[67],"txt4j"); }
    }

  //Object txt4k
  if (HideObj[68] == 0)
    {
  if (lang == 0)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[68] = newobject("Text","Center Front Fold Remove Seam Allowanc",1.5707963267949,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint(x[359],(y[359]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[68],"txt4k"); }
    if (lang == 1) { name_object(Obj[68],"txt4k"); }
    if (lang == 2) { name_object(Obj[68],"txt4k"); }
    if (lang == 3) { name_object(Obj[68],"txt4k"); }
    if (lang == 4) { name_object(Obj[68],"txt4k"); }
    if (lang == 5) { name_object(Obj[68],"txt4k"); }
    if (lang == 6) { name_object(Obj[68],"txt4k"); }
    }

  //Object txt4l
  if (HideObj[69] == 0)
    {
  if (lang == 0)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[69] = newobject("Text","Empire Cross Over Dress1",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint(x[360],(y[360]+-1),"LINE");
    if (lang == 0) { name_object(Obj[69],"txt4l"); }
    if (lang == 1) { name_object(Obj[69],"txt4l"); }
    if (lang == 2) { name_object(Obj[69],"txt4l"); }
    if (lang == 3) { name_object(Obj[69],"txt4l"); }
    if (lang == 4) { name_object(Obj[69],"txt4l"); }
    if (lang == 5) { name_object(Obj[69],"txt4l"); }
    if (lang == 6) { name_object(Obj[69],"txt4l"); }
    }

  //Object txt4m
  if (HideObj[70] == 0)
    {
  if (lang == 0)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[70] = newobject("Text","Center Front",0,0.4,0.4,"PatternMaker");
    }

  current_point=addpoint((x[361]+0.5),(y[361]+-1.75),"LINE");
    if (lang == 0) { name_object(Obj[70],"txt4m"); }
    if (lang == 1) { name_object(Obj[70],"txt4m"); }
    if (lang == 2) { name_object(Obj[70],"txt4m"); }
    if (lang == 3) { name_object(Obj[70],"txt4m"); }
    if (lang == 4) { name_object(Obj[70],"txt4m"); }
    if (lang == 5) { name_object(Obj[70],"txt4m"); }
    if (lang == 6) { name_object(Obj[70],"txt4m"); }
    }

  //Object txt4n
  if (HideObj[71] == 0)
    {
  if (lang == 0)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[71] = newobject("Text","Cut 1 on fold",0,0.3,0.3,"PatternMaker");
    }

  current_point=addpoint((x[362]+0.5),(y[362]+-2.5),"LINE");
    if (lang == 0) { name_object(Obj[71],"txt4n"); }
    if (lang == 1) { name_object(Obj[71],"txt4n"); }
    if (lang == 2) { name_object(Obj[71],"txt4n"); }
    if (lang == 3) { name_object(Obj[71],"txt4n"); }
    if (lang == 4) { name_object(Obj[71],"txt4n"); }
    if (lang == 5) { name_object(Obj[71],"txt4n"); }
    if (lang == 6) { name_object(Obj[71],"txt4n"); }
    }

  //Object CBgrainline
  if (HideObj[72] == 0)
    {

  Obj[72] = newobject("poly");
  current_point=addpoint(x[343],y[343],"LINE");
  current_point=addpoint(x[345],y[345],"OPEN");
    if (lang == 0) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 1) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 2) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 3) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 4) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 5) { name_object(Obj[72],"CBgrainline"); }
    if (lang == 6) { name_object(Obj[72],"CBgrainline"); }
    }

  //Object SBgrainline
  if (HideObj[73] == 0)
    {

  Obj[73] = newobject("poly");
  current_point=addpoint(x[344],y[344],"LINE");
  current_point=addpoint(x[342],y[342],"OPEN");
    if (lang == 0) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 1) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 2) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 3) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 4) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 5) { name_object(Obj[73],"SBgrainline"); }
    if (lang == 6) { name_object(Obj[73],"SBgrainline"); }
    }

  //Object SFgrainline
  if (HideObj[74] == 0)
    {

  Obj[74] = newobject("poly");
  current_point=addpoint(x[384],y[384],"LINE");
  current_point=addpoint(x[387],y[387],"OPEN");
    if (lang == 0) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 1) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 2) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 3) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 4) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 5) { name_object(Obj[74],"SFgrainline"); }
    if (lang == 6) { name_object(Obj[74],"SFgrainline"); }
    }

  //Object CfrontGrainline
  if (HideObj[75] == 0)
    {

  Obj[75] = newobject("poly");
  current_point=addpoint(x[390],y[390],"LINE");
  current_point=addpoint(x[391],y[391],"OPEN");
    if (lang == 0) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 1) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 2) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 3) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 4) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 5) { name_object(Obj[75],"CfrontGrainline"); }
    if (lang == 6) { name_object(Obj[75],"CfrontGrainline"); }
    }

  //Object txt1f
  if (HideObj[76] == 0)
    {
  if (lang == 0)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[76] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[142]+1),(y[142]+0.2),"LINE");
    if (lang == 0) { name_object(Obj[76],"txt1f"); }
    if (lang == 1) { name_object(Obj[76],"txt1f"); }
    if (lang == 2) { name_object(Obj[76],"txt1f"); }
    if (lang == 3) { name_object(Obj[76],"txt1f"); }
    if (lang == 4) { name_object(Obj[76],"txt1f"); }
    if (lang == 5) { name_object(Obj[76],"txt1f"); }
    if (lang == 6) { name_object(Obj[76],"txt1f"); }
    }

  //Object txt1g
  if (HideObj[77] == 0)
    {
  if (lang == 0)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[77] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[143]+1),(y[143]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[77],"txt1g"); }
    if (lang == 1) { name_object(Obj[77],"txt1g"); }
    if (lang == 2) { name_object(Obj[77],"txt1g"); }
    if (lang == 3) { name_object(Obj[77],"txt1g"); }
    if (lang == 4) { name_object(Obj[77],"txt1g"); }
    if (lang == 5) { name_object(Obj[77],"txt1g"); }
    if (lang == 6) { name_object(Obj[77],"txt1g"); }
    }

  //Object txt1h
  if (HideObj[78] == 0)
    {
  if (lang == 0)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[78] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[375]+1),(y[375]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[78],"txt1h"); }
    if (lang == 1) { name_object(Obj[78],"txt1h"); }
    if (lang == 2) { name_object(Obj[78],"txt1h"); }
    if (lang == 3) { name_object(Obj[78],"txt1h"); }
    if (lang == 4) { name_object(Obj[78],"txt1h"); }
    if (lang == 5) { name_object(Obj[78],"txt1h"); }
    if (lang == 6) { name_object(Obj[78],"txt1h"); }
    }

  //Object txt1i
  if (HideObj[79] == 0)
    {
  if (lang == 0)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[79] = newobject("Text","GINANI PATTERNS",0,0.2,0.2,"PatternMaker");
    }

  current_point=addpoint((x[354]+1),(y[354]+0.5),"LINE");
    if (lang == 0) { name_object(Obj[79],"txt1i"); }
    if (lang == 1) { name_object(Obj[79],"txt1i"); }
    if (lang == 2) { name_object(Obj[79],"txt1i"); }
    if (lang == 3) { name_object(Obj[79],"txt1i"); }
    if (lang == 4) { name_object(Obj[79],"txt1i"); }
    if (lang == 5) { name_object(Obj[79],"txt1i"); }
    if (lang == 6) { name_object(Obj[79],"txt1i"); }
    }
  offset_mark(53, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(54, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(55, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  offset_mark(56, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow1View3()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow1View3");
    }
  Flow1View3Points();
  }

Flow1View3Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //6l
  x[333]= (x[94]+x[226])/2;
y[333]=(y[94]+y[226])/2;

  //6m
  x[334]= (x[226]+x[143])/2;
y[334]=(y[226]+y[143])/2;

  //6n
  x[335]= (x[67]+x[146])/2;
y[335]=(y[67]+y[146])/2;

  //6o
  x[336]= (x[96]+x[94])/2;
y[336]=(y[96]+y[94])/2;

  //6p
  x[337]= (x[95]+x[94])/2;
y[337]=(y[95]+y[94])/2;

  //6q
  x[338]= (x[163]+x[44])/2;
y[338]=(y[163]+y[44])/2;

  //6r
  x[339] = x[338];
y[339] = y[5];

  //6s
  x[340]= (x[162]+x[164])/2;
y[340]=(y[162]+y[164])/2;

  //6t
  x[341] = x[340];
y[341] = y[5];

  //6u
  x[342]= (x[161]+x[90])/2;
y[342]=(y[161]+y[90])/2;

  //6v
  x[343]= (x[160]+x[95])/2;
y[343]=(y[160]+y[95])/2;

  //6w
  x[344] = x[342];
y[344] = y[5];

  //6x
  x[345] = x[343];
y[345] = y[5];

  //MoveStart(9)
  x[346]=x[0]+12.1695797086938;
y[346]=y[0]+-15.5926532414988;
  //MoveEnd(9)
  x[347]=x[0]+14.0217911490621;
y[347]=y[0]+-15.0478851708022;
  //2v(3)
  x[348] = x[50] + x[347] - x[346] ;
y[348] = y[50] + y[347] - y[346] ;

  //4v(3)
  x[349] = x[137] + x[347] - x[346] ;
y[349] = y[137] + y[347] - y[346] ;

  //2s(5)
  x[350] = x[47] + x[347] - x[346] ;
y[350] = y[47] + y[347] - y[346] ;

  //1b(2)
  x[351] = x[3] + x[347] - x[346] ;
y[351] = y[3] + y[347] - y[346] ;

  //1c(2)
  x[352] = x[4] + x[347] - x[346] ;
y[352] = y[4] + y[347] - y[346] ;

  //5f(2)
  x[353] = x[147] + x[347] - x[346] ;
y[353] = y[147] + y[347] - y[346] ;

  //5e(2)
  x[354] = x[146] + x[347] - x[346] ;
y[354] = y[146] + y[347] - y[346] ;

  //6n(2)
  x[355] = x[335] + x[347] - x[346] ;
y[355] = y[335] + y[347] - y[346] ;

  //2m(2)
  x[356] = x[41] + x[347] - x[346] ;
y[356] = y[41] + y[347] - y[346] ;

  //3b(2)
  x[357] = x[67] + x[347] - x[346] ;
y[357] = y[67] + y[347] - y[346] ;

  //2p(2)
  x[358] = x[44] + x[347] - x[346] ;
y[358] = y[44] + y[347] - y[346] ;

  //1c(3)
  x[359] = x[4] + x[347] - x[346] ;
y[359] = y[4] + y[347] - y[346] ;

  //2m(3)
  x[360] = x[41] + x[347] - x[346] ;
y[360] = y[41] + y[347] - y[346] ;

  //2m(4)
  x[361] = x[41] + x[347] - x[346] ;
y[361] = y[41] + y[347] - y[346] ;

  //2m(5)
  x[362] = x[41] + x[347] - x[346] ;
y[362] = y[41] + y[347] - y[346] ;

  //MoveStart(10)
  x[363]=x[0]+3.39881377047958;
y[363]=y[0]+-14.817871985397;
  //MoveEnd(10)
  x[364]=x[0]+1.65555594425066;
y[364]=y[0]+-13.9825609436623;
  //4f(7)
  x[365] = x[98] + x[364] - x[363] ;
y[365] = y[98] + y[364] - y[363] ;

  //4u(7)
  x[366] = x[136] + x[364] - x[363] ;
y[366] = y[136] + y[364] - y[363] ;

  //5x(7)
  x[367] = x[166] + x[364] - x[363] ;
y[367] = y[166] + y[364] - y[363] ;

  //2w(7)
  x[368] = x[51] + x[364] - x[363] ;
y[368] = y[51] + y[364] - y[363] ;

  //2o(5)
  x[369] = x[43] + x[364] - x[363] ;
y[369] = y[43] + y[364] - y[363] ;

  //3b(3)
  x[370] = x[67] + x[364] - x[363] ;
y[370] = y[67] + y[364] - y[363] ;

  //2m(6)
  x[371] = x[41] + x[364] - x[363] ;
y[371] = y[41] + y[364] - y[363] ;

  //6n(3)
  x[372] = x[335] + x[364] - x[363] ;
y[372] = y[335] + y[364] - y[363] ;

  //5e(3)
  x[373] = x[146] + x[364] - x[363] ;
y[373] = y[146] + y[364] - y[363] ;

  //3a6(2)
  x[374] = x[172] + x[364] - x[363] ;
y[374] = y[172] + y[364] - y[363] ;

  //5d(4)
  x[375] = x[145] + x[364] - x[363] ;
y[375] = y[145] + y[364] - y[363] ;

  //2f1(3)
  x[376] = x[209] + x[364] - x[363] ;
y[376] = y[209] + y[364] - y[363] ;

  //2f(4)
  x[377] = x[33] + x[364] - x[363] ;
y[377] = y[33] + y[364] - y[363] ;

  //2l(4)
  x[378] = x[39] + x[364] - x[363] ;
y[378] = y[39] + y[364] - y[363] ;

  //2j(6)
  x[379] = x[37] + x[364] - x[363] ;
y[379] = y[37] + y[364] - y[363] ;

  //2f(5)
  x[380] = x[33] + x[364] - x[363] ;
y[380] = y[33] + y[364] - y[363] ;

  //2f(6)
  x[381] = x[33] + x[364] - x[363] ;
y[381] = y[33] + y[364] - y[363] ;

  //2f(7)
  x[382] = x[33] + x[364] - x[363] ;
y[382] = y[33] + y[364] - y[363] ;

  //6s(2)
  x[383] = x[340] + x[364] - x[363] ;
y[383] = y[340] + y[364] - y[363] ;

  //6t(2)
  x[384] = x[341] + x[364] - x[363] ;
y[384] = y[341] + y[364] - y[363] ;

  //3v1
  x[385] = x[349];
y[385] = y[362];

  }

Flow1View3Objects()
{
  }

Flow2View0()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow2View0");
    }
  Flow2View0Points();
  }

Flow2View0Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //7a
  x[392]=x[0]+Var[18];
y[392]=y[0];
  //7b
  x[393]=x[392];
y[393]=y[392]+Var[49]/-3+1;
  //7c
  x[394]=x[393]+Var[46]/-1;
y[394]=y[393];
  //7d
  x[395]=x[393]+Var[45];
y[395]=y[393];
  //7e
  LinePointDist(396, 394, 393, 392,  Var[46]  + 0, 0);

  //7f
  LinePointDist(397, 393, 395, 392,  Var[45]  + 0, 1);

  //7g
  x[398]= (x[397]+x[392])/2;
y[398]=(y[397]+y[392])/2;

  //7h
  x[399]= (x[392]+x[396])/2;
y[399]=(y[392]+y[396])/2;

  //7i
  right_ang(400, 398, 392,  + -0.5, 0);

  //7j
  right_ang(401, 399, 392,  + 0.5, 1);

  //7k
  x[402]= (x[401]+x[392])/2;
y[402]=(y[401]+y[392])/2;

  //7l
  x[403]= (x[396]+x[401])/2;
y[403]=(y[396]+y[401])/2;

  //7m
  x[404]= (x[400]+x[392])/2;
y[404]=(y[400]+y[392])/2;

  //7n
  x[405]= (x[397]+x[400])/2;
y[405]=(y[397]+y[400])/2;

  //7o
  x[406]=x[392];
y[406]=y[392]+Var[12]/-1;
  //7p
  x[407] = x[402];
y[407] = y[392];

  //7q
  x[408] = x[400];
y[408] = y[392];

  //7s
  x[409] = x[405];
y[409] = y[397];

  //7t
  x[410] = x[403];
y[410] = y[396];

  //7u
  x[411] = x[396];
y[411] = y[406];

  //7v
  x[412] = x[397];
y[412] = y[406];

  //7w
  x[413]= (x[411]+x[406])/2;
y[413]=(y[411]+y[406])/2;

  //7x
  x[414]= (x[411]+x[413])/2;
y[414]=(y[411]+y[413])/2;

  //7y
  x[415]= (x[406]+x[412])/2;
y[415]=(y[406]+y[412])/2;

  //7z
  x[416]= (x[415]+x[412])/2;
y[416]=(y[415]+y[412])/2;

  //7s1
  x[417]=x[409];
y[417]=y[409]+-0.75;
  //7s2
  right_ang(418, 404, 392,  + 0.625, 0);

  //7s3
  x[419]=x[408]+-0.25;
y[419]=y[408];
  //MoveStart
  x[420]=x[0]+23.184324368117;
y[420]=y[0]+-5.73844884488449;
  //MoveEnd
  x[421]=x[0]+23.0935652922094;
y[421]=y[0]+-5.23927392739274;
  //7t(2)
  x[422] = x[410] + x[421] - x[420] ;
y[422] = y[410] + y[421] - y[420] ;

  //MoveStart(2)
  x[423]=x[0]+32.3056114968299;
y[423]=y[0]+-0.20214521452145;
  //MoveEnd(2)
  x[424]=x[0]+31.8971956552457;
y[424]=y[0]+0.0247524752475267;
  //7s3(2)
  x[425] = x[419] + x[424] - x[423] ;
y[425] = y[419] + y[424] - y[423] ;

  //8a
  x[426]= (x[397]+x[416])/2;
y[426]=(y[397]+y[416])/2;

  //8b
  x[427]= (x[396]+x[414])/2;
y[427]=(y[396]+y[414])/2;

  //8c
  cont(396, 427, 428, +-2);

  //8d
  cont(397, 426, 429, +-2);

  //8e
  x[430]= (x[429]+x[416])/2;
y[430]=(y[429]+y[416])/2;

  //8f
  x[431]= (x[428]+x[414])/2;
y[431]=(y[428]+y[414])/2;

  //8d1
  x[432] = x[413];
y[432] = y[428];

  //8d2
  x[433] = x[406];
y[433] = y[428];

  //8d3
  x[434] = x[415];
y[434] = y[428];

  //8d4
  x[435] = x[434];
y[435] = y[431];

  //8d5
  x[436] = x[433];
y[436] = y[431];

  //8d6
  x[437] = x[413];
y[437] = y[431];

  }

Flow2View0Objects()
{

  //Object SLEEVE
  if (HideObj[80] == 0)
    {

  Obj[80] = newobject("poly");
  current_point=addpoint(x[396],y[396],"XARC_START");
  current_point=addpoint(x[422],y[422],"XARC_CORNER");
  current_point=addpoint(x[401],y[401],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",1);
  current_point=addpoint(x[407],y[407],"XARC_CORNER");
  current_point=addpoint(x[392],y[392],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[425],y[425],"XARC_CORNER");
  current_point=addpoint(x[400],y[400],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[417],y[417],"XARC_CORNER");
  current_point=addpoint(x[397],y[397],"LINE");
  current_point=addpoint(x[416],y[416],"LINE");
  current_point=addpoint(x[414],y[414],"LINE");
    if (lang == 0) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 1) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 2) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 3) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 4) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 5) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 6) { name_object(Obj[80],"SLEEVE"); }
    }

  //Object Grainline
  if (HideObj[81] == 0)
    {

  Obj[81] = newobject("poly");
  current_point=addpoint(x[392],y[392],"LINE");
  current_point=addpoint(x[393],y[393],"OPEN");
    if (lang == 0) { name_object(Obj[81],"Grainline"); }
    if (lang == 1) { name_object(Obj[81],"Grainline"); }
    if (lang == 2) { name_object(Obj[81],"Grainline"); }
    if (lang == 3) { name_object(Obj[81],"Grainline"); }
    if (lang == 4) { name_object(Obj[81],"Grainline"); }
    if (lang == 5) { name_object(Obj[81],"Grainline"); }
    if (lang == 6) { name_object(Obj[81],"Grainline"); }
    }

  //Object 70
  if (HideObj[82] == 0)
    {
  if (lang == 0)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+-1),"LINE");
    if (lang == 0) { name_object(Obj[82],"70"); }
    if (lang == 1) { name_object(Obj[82],"70"); }
    if (lang == 2) { name_object(Obj[82],"70"); }
    if (lang == 3) { name_object(Obj[82],"70"); }
    if (lang == 4) { name_object(Obj[82],"70"); }
    if (lang == 5) { name_object(Obj[82],"70"); }
    if (lang == 6) { name_object(Obj[82],"70"); }
    }

  //Object 70a
  if (HideObj[83] == 0)
    {
  if (lang == 0)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[401]+1),y[401],"LINE");
    if (lang == 0) { name_object(Obj[83],"70a"); }
    if (lang == 1) { name_object(Obj[83],"70a"); }
    if (lang == 2) { name_object(Obj[83],"70a"); }
    if (lang == 3) { name_object(Obj[83],"70a"); }
    if (lang == 4) { name_object(Obj[83],"70a"); }
    if (lang == 5) { name_object(Obj[83],"70a"); }
    if (lang == 6) { name_object(Obj[83],"70a"); }
    }

  //Object 70c
  if (HideObj[84] == 0)
    {
  if (lang == 0)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+2),"LINE");
    if (lang == 0) { name_object(Obj[84],"70c"); }
    if (lang == 1) { name_object(Obj[84],"70c"); }
    if (lang == 2) { name_object(Obj[84],"70c"); }
    if (lang == 3) { name_object(Obj[84],"70c"); }
    if (lang == 4) { name_object(Obj[84],"70c"); }
    if (lang == 5) { name_object(Obj[84],"70c"); }
    if (lang == 6) { name_object(Obj[84],"70c"); }
    }
  offset_mark(80, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow2View1()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow2View1");
    }
  Var[23] = CheckToMetric(2);
  if (lang == 0)
    {
    start_picture_input("Short");
      add_picture_input("Short sleeve length", Var[23], "");
    run_picture_input();
    }
  if (lang == 1)
    {
    start_picture_input("Short");
      add_picture_input("Short sleeve length", Var[23], "");
    run_picture_input();
    }
  if (lang == 2)
    {
    start_picture_input("Short");
      add_picture_input("Short sleeve length", Var[23], "");
    run_picture_input();
    }
  if (lang == 3)
    {
    start_picture_input("Short");
      add_picture_input("Short sleeve length", Var[23], "");
    run_picture_input();
    }
  if (lang == 4)
    {
    start_picture_input("Short");
      add_picture_input("Short sleeve length", Var[23], "");
    run_picture_input();
    }
  if (lang == 5)
    {
    start_picture_input("Short");
      add_picture_input("Short sleeve length", Var[23], "");
    run_picture_input();
    }
  if (lang == 6)
    {
    start_picture_input("Short");
      add_picture_input("Short sleeve length", Var[23], "");
    run_picture_input();
    }
  Var[23]= CheckFromMetric(Var[23]);
  Flow2View1Points();
  }

Flow2View1Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //7a
  x[392]=x[0]+Var[18];
y[392]=y[0];
  //7b
  x[393]=x[392];
y[393]=y[392]+Var[49]/-3+1;
  //7c
  x[394]=x[393]+Var[46]/-1;
y[394]=y[393];
  //7d
  x[395]=x[393]+Var[45];
y[395]=y[393];
  //7e
  LinePointDist(396, 394, 393, 392,  Var[46]  + 0, 0);

  //7f
  LinePointDist(397, 393, 395, 392,  Var[45]  + 0, 1);

  //7g
  x[398]= (x[397]+x[392])/2;
y[398]=(y[397]+y[392])/2;

  //7h
  x[399]= (x[392]+x[396])/2;
y[399]=(y[392]+y[396])/2;

  //7i
  right_ang(400, 398, 392,  + -0.5, 0);

  //7j
  right_ang(401, 399, 392,  + 0.5, 1);

  //7k
  x[402]= (x[401]+x[392])/2;
y[402]=(y[401]+y[392])/2;

  //7l
  x[403]= (x[396]+x[401])/2;
y[403]=(y[396]+y[401])/2;

  //7m
  x[404]= (x[400]+x[392])/2;
y[404]=(y[400]+y[392])/2;

  //7n
  x[405]= (x[397]+x[400])/2;
y[405]=(y[397]+y[400])/2;

  //7o
  x[406]=x[392];
y[406]=y[392]+Var[12]/-1;
  //7p
  x[407] = x[402];
y[407] = y[392];

  //7q
  x[408] = x[400];
y[408] = y[392];

  //7s
  x[409] = x[405];
y[409] = y[397];

  //7t
  x[410] = x[403];
y[410] = y[396];

  //7u
  x[411] = x[396];
y[411] = y[406];

  //7v
  x[412] = x[397];
y[412] = y[406];

  //7w
  x[413]= (x[411]+x[406])/2;
y[413]=(y[411]+y[406])/2;

  //7x
  x[414]= (x[411]+x[413])/2;
y[414]=(y[411]+y[413])/2;

  //7y
  x[415]= (x[406]+x[412])/2;
y[415]=(y[406]+y[412])/2;

  //7z
  x[416]= (x[415]+x[412])/2;
y[416]=(y[415]+y[412])/2;

  //7s1
  x[417]=x[409];
y[417]=y[409]+-0.75;
  //7s2
  right_ang(418, 404, 392,  + 0.625, 0);

  //7s3
  x[419]=x[408]+-0.25;
y[419]=y[408];
  //MoveStart
  x[420]=x[0]+23.184324368117;
y[420]=y[0]+-5.73844884488449;
  //MoveEnd
  x[421]=x[0]+23.0935652922094;
y[421]=y[0]+-5.23927392739274;
  //7t(2)
  x[422] = x[410] + x[421] - x[420] ;
y[422] = y[410] + y[421] - y[420] ;

  //MoveStart(2)
  x[423]=x[0]+32.3056114968299;
y[423]=y[0]+-0.20214521452145;
  //MoveEnd(2)
  x[424]=x[0]+31.8971956552457;
y[424]=y[0]+0.0247524752475267;
  //7s3(2)
  x[425] = x[419] + x[424] - x[423] ;
y[425] = y[419] + y[424] - y[423] ;

  //8a
  x[426]= (x[397]+x[416])/2;
y[426]=(y[397]+y[416])/2;

  //8b
  x[427]= (x[396]+x[414])/2;
y[427]=(y[396]+y[414])/2;

  //8c
  cont(396, 427, 428, +-2);

  //8d
  cont(397, 426, 429, +-2);

  //8e
  x[430]= (x[429]+x[416])/2;
y[430]=(y[429]+y[416])/2;

  //8f
  x[431]= (x[428]+x[414])/2;
y[431]=(y[428]+y[414])/2;

  //8g
  cont(428, 396, 438, Var[23]/-1+0);

  //8h
  cont(429, 397, 439, Var[23]/-1+0);

  //8d1
  x[432] = x[413];
y[432] = y[428];

  //8d2
  x[433] = x[406];
y[433] = y[428];

  //8d3
  x[434] = x[415];
y[434] = y[428];

  //8d4
  x[435] = x[434];
y[435] = y[431];

  //8d5
  x[436] = x[433];
y[436] = y[431];

  //8d6
  x[437] = x[413];
y[437] = y[431];

  }

Flow2View1Objects()
{

  //Object SLEEVE
  if (HideObj[80] == 0)
    {

  Obj[80] = newobject("poly");
  current_point=addpoint(x[396],y[396],"XARC_START");
  current_point=addpoint(x[422],y[422],"XARC_CORNER");
  current_point=addpoint(x[401],y[401],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",1);
  current_point=addpoint(x[407],y[407],"XARC_CORNER");
  current_point=addpoint(x[392],y[392],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[425],y[425],"XARC_CORNER");
  current_point=addpoint(x[400],y[400],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[417],y[417],"XARC_CORNER");
  current_point=addpoint(x[397],y[397],"LINE");
  current_point=addpoint(x[439],y[439],"LINE");
  current_point=addpoint(x[438],y[438],"LINE");
    if (lang == 0) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 1) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 2) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 3) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 4) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 5) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 6) { name_object(Obj[80],"SLEEVE"); }
    }

  //Object Grainline
  if (HideObj[81] == 0)
    {

  Obj[81] = newobject("poly");
  current_point=addpoint(x[392],y[392],"LINE");
  current_point=addpoint(x[393],y[393],"OPEN");
    if (lang == 0) { name_object(Obj[81],"Grainline"); }
    if (lang == 1) { name_object(Obj[81],"Grainline"); }
    if (lang == 2) { name_object(Obj[81],"Grainline"); }
    if (lang == 3) { name_object(Obj[81],"Grainline"); }
    if (lang == 4) { name_object(Obj[81],"Grainline"); }
    if (lang == 5) { name_object(Obj[81],"Grainline"); }
    if (lang == 6) { name_object(Obj[81],"Grainline"); }
    }

  //Object 70
  if (HideObj[82] == 0)
    {
  if (lang == 0)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+-1),"LINE");
    if (lang == 0) { name_object(Obj[82],"70"); }
    if (lang == 1) { name_object(Obj[82],"70"); }
    if (lang == 2) { name_object(Obj[82],"70"); }
    if (lang == 3) { name_object(Obj[82],"70"); }
    if (lang == 4) { name_object(Obj[82],"70"); }
    if (lang == 5) { name_object(Obj[82],"70"); }
    if (lang == 6) { name_object(Obj[82],"70"); }
    }

  //Object 70a
  if (HideObj[83] == 0)
    {
  if (lang == 0)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[401]+1),y[401],"LINE");
    if (lang == 0) { name_object(Obj[83],"70a"); }
    if (lang == 1) { name_object(Obj[83],"70a"); }
    if (lang == 2) { name_object(Obj[83],"70a"); }
    if (lang == 3) { name_object(Obj[83],"70a"); }
    if (lang == 4) { name_object(Obj[83],"70a"); }
    if (lang == 5) { name_object(Obj[83],"70a"); }
    if (lang == 6) { name_object(Obj[83],"70a"); }
    }

  //Object 70c
  if (HideObj[84] == 0)
    {
  if (lang == 0)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+2),"LINE");
    if (lang == 0) { name_object(Obj[84],"70c"); }
    if (lang == 1) { name_object(Obj[84],"70c"); }
    if (lang == 2) { name_object(Obj[84],"70c"); }
    if (lang == 3) { name_object(Obj[84],"70c"); }
    if (lang == 4) { name_object(Obj[84],"70c"); }
    if (lang == 5) { name_object(Obj[84],"70c"); }
    if (lang == 6) { name_object(Obj[84],"70c"); }
    }
  offset_mark(80, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow2View2()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow2View2");
    }
  Flow2View2Points();
  }

Flow2View2Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //7a
  x[392]=x[0]+Var[18];
y[392]=y[0];
  //7b
  x[393]=x[392];
y[393]=y[392]+Var[49]/-3+1;
  //7c
  x[394]=x[393]+Var[46]/-1;
y[394]=y[393];
  //7d
  x[395]=x[393]+Var[45];
y[395]=y[393];
  //7e
  LinePointDist(396, 394, 393, 392,  Var[46]  + 0, 0);

  //7f
  LinePointDist(397, 393, 395, 392,  Var[45]  + 0, 1);

  //7g
  x[398]= (x[397]+x[392])/2;
y[398]=(y[397]+y[392])/2;

  //7h
  x[399]= (x[392]+x[396])/2;
y[399]=(y[392]+y[396])/2;

  //7i
  right_ang(400, 398, 392,  + -0.5, 0);

  //7j
  right_ang(401, 399, 392,  + 0.5, 1);

  //7k
  x[402]= (x[401]+x[392])/2;
y[402]=(y[401]+y[392])/2;

  //7l
  x[403]= (x[396]+x[401])/2;
y[403]=(y[396]+y[401])/2;

  //7m
  x[404]= (x[400]+x[392])/2;
y[404]=(y[400]+y[392])/2;

  //7n
  x[405]= (x[397]+x[400])/2;
y[405]=(y[397]+y[400])/2;

  //7o
  x[406]=x[392];
y[406]=y[392]+Var[12]/-1;
  //7p
  x[407] = x[402];
y[407] = y[392];

  //7q
  x[408] = x[400];
y[408] = y[392];

  //7s
  x[409] = x[405];
y[409] = y[397];

  //7t
  x[410] = x[403];
y[410] = y[396];

  //7u
  x[411] = x[396];
y[411] = y[406];

  //7v
  x[412] = x[397];
y[412] = y[406];

  //7w
  x[413]= (x[411]+x[406])/2;
y[413]=(y[411]+y[406])/2;

  //7x
  x[414]= (x[411]+x[413])/2;
y[414]=(y[411]+y[413])/2;

  //7y
  x[415]= (x[406]+x[412])/2;
y[415]=(y[406]+y[412])/2;

  //7z
  x[416]= (x[415]+x[412])/2;
y[416]=(y[415]+y[412])/2;

  //7s1
  x[417]=x[409];
y[417]=y[409]+-0.75;
  //7s2
  right_ang(418, 404, 392,  + 0.625, 0);

  //7s3
  x[419]=x[408]+-0.25;
y[419]=y[408];
  //MoveStart
  x[420]=x[0]+23.184324368117;
y[420]=y[0]+-5.73844884488449;
  //MoveEnd
  x[421]=x[0]+23.0935652922094;
y[421]=y[0]+-5.23927392739274;
  //7t(2)
  x[422] = x[410] + x[421] - x[420] ;
y[422] = y[410] + y[421] - y[420] ;

  //MoveStart(2)
  x[423]=x[0]+32.3056114968299;
y[423]=y[0]+-0.20214521452145;
  //MoveEnd(2)
  x[424]=x[0]+31.8971956552457;
y[424]=y[0]+0.0247524752475267;
  //7s3(2)
  x[425] = x[419] + x[424] - x[423] ;
y[425] = y[419] + y[424] - y[423] ;

  //8a
  x[426]= (x[397]+x[416])/2;
y[426]=(y[397]+y[416])/2;

  //8b
  x[427]= (x[396]+x[414])/2;
y[427]=(y[396]+y[414])/2;

  //8c
  cont(396, 427, 428, +-2);

  //8d
  cont(397, 426, 429, +-2);

  //8e
  x[430]= (x[429]+x[416])/2;
y[430]=(y[429]+y[416])/2;

  //8f
  x[431]= (x[428]+x[414])/2;
y[431]=(y[428]+y[414])/2;

  //8d1
  x[432] = x[413];
y[432] = y[428];

  //8d2
  x[433] = x[406];
y[433] = y[428];

  //8d3
  x[434] = x[415];
y[434] = y[428];

  //8d4
  x[435] = x[434];
y[435] = y[431];

  //8d5
  x[436] = x[433];
y[436] = y[431];

  //8d6
  x[437] = x[413];
y[437] = y[431];

  }

Flow2View2Objects()
{

  //Object SLEEVE
  if (HideObj[80] == 0)
    {

  Obj[80] = newobject("poly");
  current_point=addpoint(x[396],y[396],"XARC_START");
  current_point=addpoint(x[422],y[422],"XARC_CORNER");
  current_point=addpoint(x[401],y[401],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",1);
  current_point=addpoint(x[407],y[407],"XARC_CORNER");
  current_point=addpoint(x[392],y[392],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[425],y[425],"XARC_CORNER");
  current_point=addpoint(x[400],y[400],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[417],y[417],"XARC_CORNER");
  current_point=addpoint(x[397],y[397],"LINE");
  current_point=addpoint(x[429],y[429],"LINE");
  current_point=addpoint(x[428],y[428],"LINE");
    if (lang == 0) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 1) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 2) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 3) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 4) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 5) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 6) { name_object(Obj[80],"SLEEVE"); }
    }

  //Object Grainline
  if (HideObj[81] == 0)
    {

  Obj[81] = newobject("poly");
  current_point=addpoint(x[392],y[392],"LINE");
  current_point=addpoint(x[393],y[393],"OPEN");
    if (lang == 0) { name_object(Obj[81],"Grainline"); }
    if (lang == 1) { name_object(Obj[81],"Grainline"); }
    if (lang == 2) { name_object(Obj[81],"Grainline"); }
    if (lang == 3) { name_object(Obj[81],"Grainline"); }
    if (lang == 4) { name_object(Obj[81],"Grainline"); }
    if (lang == 5) { name_object(Obj[81],"Grainline"); }
    if (lang == 6) { name_object(Obj[81],"Grainline"); }
    }

  //Object 70
  if (HideObj[82] == 0)
    {
  if (lang == 0)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+-1),"LINE");
    if (lang == 0) { name_object(Obj[82],"70"); }
    if (lang == 1) { name_object(Obj[82],"70"); }
    if (lang == 2) { name_object(Obj[82],"70"); }
    if (lang == 3) { name_object(Obj[82],"70"); }
    if (lang == 4) { name_object(Obj[82],"70"); }
    if (lang == 5) { name_object(Obj[82],"70"); }
    if (lang == 6) { name_object(Obj[82],"70"); }
    }

  //Object 70a
  if (HideObj[83] == 0)
    {
  if (lang == 0)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[401]+1),y[401],"LINE");
    if (lang == 0) { name_object(Obj[83],"70a"); }
    if (lang == 1) { name_object(Obj[83],"70a"); }
    if (lang == 2) { name_object(Obj[83],"70a"); }
    if (lang == 3) { name_object(Obj[83],"70a"); }
    if (lang == 4) { name_object(Obj[83],"70a"); }
    if (lang == 5) { name_object(Obj[83],"70a"); }
    if (lang == 6) { name_object(Obj[83],"70a"); }
    }

  //Object 70c
  if (HideObj[84] == 0)
    {
  if (lang == 0)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+2),"LINE");
    if (lang == 0) { name_object(Obj[84],"70c"); }
    if (lang == 1) { name_object(Obj[84],"70c"); }
    if (lang == 2) { name_object(Obj[84],"70c"); }
    if (lang == 3) { name_object(Obj[84],"70c"); }
    if (lang == 4) { name_object(Obj[84],"70c"); }
    if (lang == 5) { name_object(Obj[84],"70c"); }
    if (lang == 6) { name_object(Obj[84],"70c"); }
    }
  offset_mark(80, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow2View3()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow2View3");
    }
  Flow2View3Points();
  }

Flow2View3Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //7a
  x[392]=x[0]+Var[18];
y[392]=y[0];
  //7b
  x[393]=x[392];
y[393]=y[392]+Var[49]/-3+1;
  //7c
  x[394]=x[393]+Var[46]/-1;
y[394]=y[393];
  //7d
  x[395]=x[393]+Var[45];
y[395]=y[393];
  //7e
  LinePointDist(396, 394, 393, 392,  Var[46]  + 0, 0);

  //7f
  LinePointDist(397, 393, 395, 392,  Var[45]  + 0, 1);

  //7g
  x[398]= (x[397]+x[392])/2;
y[398]=(y[397]+y[392])/2;

  //7h
  x[399]= (x[392]+x[396])/2;
y[399]=(y[392]+y[396])/2;

  //7i
  right_ang(400, 398, 392,  + -0.5, 0);

  //7j
  right_ang(401, 399, 392,  + 0.5, 1);

  //7k
  x[402]= (x[401]+x[392])/2;
y[402]=(y[401]+y[392])/2;

  //7l
  x[403]= (x[396]+x[401])/2;
y[403]=(y[396]+y[401])/2;

  //7m
  x[404]= (x[400]+x[392])/2;
y[404]=(y[400]+y[392])/2;

  //7n
  x[405]= (x[397]+x[400])/2;
y[405]=(y[397]+y[400])/2;

  //7o
  x[406]=x[392];
y[406]=y[392]+Var[12]/-1;
  //7p
  x[407] = x[402];
y[407] = y[392];

  //7q
  x[408] = x[400];
y[408] = y[392];

  //7s
  x[409] = x[405];
y[409] = y[397];

  //7t
  x[410] = x[403];
y[410] = y[396];

  //7u
  x[411] = x[396];
y[411] = y[406];

  //7v
  x[412] = x[397];
y[412] = y[406];

  //7w
  x[413]= (x[411]+x[406])/2;
y[413]=(y[411]+y[406])/2;

  //7x
  x[414]= (x[411]+x[413])/2;
y[414]=(y[411]+y[413])/2;

  //7y
  x[415]= (x[406]+x[412])/2;
y[415]=(y[406]+y[412])/2;

  //7z
  x[416]= (x[415]+x[412])/2;
y[416]=(y[415]+y[412])/2;

  //7s1
  x[417]=x[409];
y[417]=y[409]+-0.75;
  //7s2
  right_ang(418, 404, 392,  + 0.625, 0);

  //7s3
  x[419]=x[408]+-0.25;
y[419]=y[408];
  //MoveStart
  x[420]=x[0]+23.184324368117;
y[420]=y[0]+-5.73844884488449;
  //MoveEnd
  x[421]=x[0]+23.0935652922094;
y[421]=y[0]+-5.23927392739274;
  //7t(2)
  x[422] = x[410] + x[421] - x[420] ;
y[422] = y[410] + y[421] - y[420] ;

  //MoveStart(2)
  x[423]=x[0]+32.3056114968299;
y[423]=y[0]+-0.20214521452145;
  //MoveEnd(2)
  x[424]=x[0]+31.8971956552457;
y[424]=y[0]+0.0247524752475267;
  //7s3(2)
  x[425] = x[419] + x[424] - x[423] ;
y[425] = y[419] + y[424] - y[423] ;

  //8a
  x[426]= (x[397]+x[416])/2;
y[426]=(y[397]+y[416])/2;

  //8b
  x[427]= (x[396]+x[414])/2;
y[427]=(y[396]+y[414])/2;

  //8c
  cont(396, 427, 428, +-2);

  //8d
  cont(397, 426, 429, +-2);

  //8e
  x[430]= (x[429]+x[416])/2;
y[430]=(y[429]+y[416])/2;

  //8f
  x[431]= (x[428]+x[414])/2;
y[431]=(y[428]+y[414])/2;

  //8d1
  x[432] = x[413];
y[432] = y[428];

  //8d2
  x[433] = x[406];
y[433] = y[428];

  //8d3
  x[434] = x[415];
y[434] = y[428];

  //8d4
  x[435] = x[434];
y[435] = y[431];

  //8d5
  x[436] = x[433];
y[436] = y[431];

  //8d6
  x[437] = x[413];
y[437] = y[431];

  }

Flow2View3Objects()
{

  //Object SLEEVE
  if (HideObj[80] == 0)
    {

  Obj[80] = newobject("poly");
  current_point=addpoint(x[396],y[396],"XARC_START");
  current_point=addpoint(x[422],y[422],"XARC_CORNER");
  current_point=addpoint(x[401],y[401],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",1);
  current_point=addpoint(x[407],y[407],"XARC_CORNER");
  current_point=addpoint(x[392],y[392],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[425],y[425],"XARC_CORNER");
  current_point=addpoint(x[400],y[400],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[417],y[417],"XARC_CORNER");
  current_point=addpoint(x[397],y[397],"LINE");
  current_point=addpoint(x[430],y[430],"LINE");
  current_point=addpoint(x[431],y[431],"LINE");
    if (lang == 0) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 1) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 2) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 3) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 4) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 5) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 6) { name_object(Obj[80],"SLEEVE"); }
    }

  //Object Grainline
  if (HideObj[81] == 0)
    {

  Obj[81] = newobject("poly");
  current_point=addpoint(x[392],y[392],"LINE");
  current_point=addpoint(x[393],y[393],"OPEN");
    if (lang == 0) { name_object(Obj[81],"Grainline"); }
    if (lang == 1) { name_object(Obj[81],"Grainline"); }
    if (lang == 2) { name_object(Obj[81],"Grainline"); }
    if (lang == 3) { name_object(Obj[81],"Grainline"); }
    if (lang == 4) { name_object(Obj[81],"Grainline"); }
    if (lang == 5) { name_object(Obj[81],"Grainline"); }
    if (lang == 6) { name_object(Obj[81],"Grainline"); }
    }

  //Object 70
  if (HideObj[82] == 0)
    {
  if (lang == 0)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+-1),"LINE");
    if (lang == 0) { name_object(Obj[82],"70"); }
    if (lang == 1) { name_object(Obj[82],"70"); }
    if (lang == 2) { name_object(Obj[82],"70"); }
    if (lang == 3) { name_object(Obj[82],"70"); }
    if (lang == 4) { name_object(Obj[82],"70"); }
    if (lang == 5) { name_object(Obj[82],"70"); }
    if (lang == 6) { name_object(Obj[82],"70"); }
    }

  //Object 70a
  if (HideObj[83] == 0)
    {
  if (lang == 0)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[401]+1),y[401],"LINE");
    if (lang == 0) { name_object(Obj[83],"70a"); }
    if (lang == 1) { name_object(Obj[83],"70a"); }
    if (lang == 2) { name_object(Obj[83],"70a"); }
    if (lang == 3) { name_object(Obj[83],"70a"); }
    if (lang == 4) { name_object(Obj[83],"70a"); }
    if (lang == 5) { name_object(Obj[83],"70a"); }
    if (lang == 6) { name_object(Obj[83],"70a"); }
    }

  //Object 70c
  if (HideObj[84] == 0)
    {
  if (lang == 0)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+2),"LINE");
    if (lang == 0) { name_object(Obj[84],"70c"); }
    if (lang == 1) { name_object(Obj[84],"70c"); }
    if (lang == 2) { name_object(Obj[84],"70c"); }
    if (lang == 3) { name_object(Obj[84],"70c"); }
    if (lang == 4) { name_object(Obj[84],"70c"); }
    if (lang == 5) { name_object(Obj[84],"70c"); }
    if (lang == 6) { name_object(Obj[84],"70c"); }
    }
  offset_mark(80, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow2View4()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow2View4");
    }
  Flow2View4Points();
  }

Flow2View4Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //7a
  x[392]=x[0]+Var[18];
y[392]=y[0];
  //7b
  x[393]=x[392];
y[393]=y[392]+Var[49]/-3+1;
  //7c
  x[394]=x[393]+Var[46]/-1;
y[394]=y[393];
  //7d
  x[395]=x[393]+Var[45];
y[395]=y[393];
  //7e
  LinePointDist(396, 394, 393, 392,  Var[46]  + 0, 0);

  //7f
  LinePointDist(397, 393, 395, 392,  Var[45]  + 0, 1);

  //7g
  x[398]= (x[397]+x[392])/2;
y[398]=(y[397]+y[392])/2;

  //7h
  x[399]= (x[392]+x[396])/2;
y[399]=(y[392]+y[396])/2;

  //7i
  right_ang(400, 398, 392,  + -0.5, 0);

  //7j
  right_ang(401, 399, 392,  + 0.5, 1);

  //7k
  x[402]= (x[401]+x[392])/2;
y[402]=(y[401]+y[392])/2;

  //7l
  x[403]= (x[396]+x[401])/2;
y[403]=(y[396]+y[401])/2;

  //7m
  x[404]= (x[400]+x[392])/2;
y[404]=(y[400]+y[392])/2;

  //7n
  x[405]= (x[397]+x[400])/2;
y[405]=(y[397]+y[400])/2;

  //7o
  x[406]=x[392];
y[406]=y[392]+Var[12]/-1;
  //7p
  x[407] = x[402];
y[407] = y[392];

  //7q
  x[408] = x[400];
y[408] = y[392];

  //7s
  x[409] = x[405];
y[409] = y[397];

  //7t
  x[410] = x[403];
y[410] = y[396];

  //7u
  x[411] = x[396];
y[411] = y[406];

  //7v
  x[412] = x[397];
y[412] = y[406];

  //7w
  x[413]= (x[411]+x[406])/2;
y[413]=(y[411]+y[406])/2;

  //7x
  x[414]= (x[411]+x[413])/2;
y[414]=(y[411]+y[413])/2;

  //7y
  x[415]= (x[406]+x[412])/2;
y[415]=(y[406]+y[412])/2;

  //7z
  x[416]= (x[415]+x[412])/2;
y[416]=(y[415]+y[412])/2;

  //7s1
  x[417]=x[409];
y[417]=y[409]+-0.75;
  //7s2
  right_ang(418, 404, 392,  + 0.625, 0);

  //7s3
  x[419]=x[408]+-0.25;
y[419]=y[408];
  //MoveStart
  x[420]=x[0]+23.184324368117;
y[420]=y[0]+-5.73844884488449;
  //MoveEnd
  x[421]=x[0]+23.0935652922094;
y[421]=y[0]+-5.23927392739274;
  //7t(2)
  x[422] = x[410] + x[421] - x[420] ;
y[422] = y[410] + y[421] - y[420] ;

  //MoveStart(2)
  x[423]=x[0]+32.3056114968299;
y[423]=y[0]+-0.20214521452145;
  //MoveEnd(2)
  x[424]=x[0]+31.8971956552457;
y[424]=y[0]+0.0247524752475267;
  //7s3(2)
  x[425] = x[419] + x[424] - x[423] ;
y[425] = y[419] + y[424] - y[423] ;

  //8a
  x[426]= (x[397]+x[416])/2;
y[426]=(y[397]+y[416])/2;

  //8b
  x[427]= (x[396]+x[414])/2;
y[427]=(y[396]+y[414])/2;

  //8c
  cont(396, 427, 428, +-2);

  //8d
  cont(397, 426, 429, +-2);

  //8e
  x[430]= (x[429]+x[416])/2;
y[430]=(y[429]+y[416])/2;

  //8f
  x[431]= (x[428]+x[414])/2;
y[431]=(y[428]+y[414])/2;

  //8d1
  x[432] = x[413];
y[432] = y[428];

  //8d2
  x[433] = x[406];
y[433] = y[428];

  //8d3
  x[434] = x[415];
y[434] = y[428];

  //8d4
  x[435] = x[434];
y[435] = y[431];

  //8d5
  x[436] = x[433];
y[436] = y[431];

  //8d6
  x[437] = x[413];
y[437] = y[431];

  }

Flow2View4Objects()
{

  //Object SLEEVE
  if (HideObj[80] == 0)
    {

  Obj[80] = newobject("poly");
  current_point=addpoint(x[396],y[396],"XARC_START");
  current_point=addpoint(x[422],y[422],"XARC_CORNER");
  current_point=addpoint(x[401],y[401],"XARC_START");
  notch_type(current_point,"DBL_NOTCH",1);
  current_point=addpoint(x[407],y[407],"XARC_CORNER");
  current_point=addpoint(x[392],y[392],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[425],y[425],"XARC_CORNER");
  current_point=addpoint(x[400],y[400],"XARC_START");
  notch_type(current_point,"NOTCH",1);
  current_point=addpoint(x[417],y[417],"XARC_CORNER");
  current_point=addpoint(x[397],y[397],"LINE");
  current_point=addpoint(x[416],y[416],"LINE");
  current_point=addpoint(x[414],y[414],"LINE");
    if (lang == 0) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 1) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 2) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 3) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 4) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 5) { name_object(Obj[80],"SLEEVE"); }
    if (lang == 6) { name_object(Obj[80],"SLEEVE"); }
    }

  //Object Grainline
  if (HideObj[81] == 0)
    {

  Obj[81] = newobject("poly");
  current_point=addpoint(x[392],y[392],"LINE");
  current_point=addpoint(x[393],y[393],"OPEN");
    if (lang == 0) { name_object(Obj[81],"Grainline"); }
    if (lang == 1) { name_object(Obj[81],"Grainline"); }
    if (lang == 2) { name_object(Obj[81],"Grainline"); }
    if (lang == 3) { name_object(Obj[81],"Grainline"); }
    if (lang == 4) { name_object(Obj[81],"Grainline"); }
    if (lang == 5) { name_object(Obj[81],"Grainline"); }
    if (lang == 6) { name_object(Obj[81],"Grainline"); }
    }

  //Object 70
  if (HideObj[82] == 0)
    {
  if (lang == 0)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[82] = newobject("Text","SLEEVE",0,0.7,0.7,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+-1),"LINE");
    if (lang == 0) { name_object(Obj[82],"70"); }
    if (lang == 1) { name_object(Obj[82],"70"); }
    if (lang == 2) { name_object(Obj[82],"70"); }
    if (lang == 3) { name_object(Obj[82],"70"); }
    if (lang == 4) { name_object(Obj[82],"70"); }
    if (lang == 5) { name_object(Obj[82],"70"); }
    if (lang == 6) { name_object(Obj[82],"70"); }
    }

  //Object 70a
  if (HideObj[83] == 0)
    {
  if (lang == 0)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[83] = newobject("Text","CUT 2",0,0.5,0.5,"PatternMaker");
    }

  current_point=addpoint((x[401]+1),y[401],"LINE");
    if (lang == 0) { name_object(Obj[83],"70a"); }
    if (lang == 1) { name_object(Obj[83],"70a"); }
    if (lang == 2) { name_object(Obj[83],"70a"); }
    if (lang == 3) { name_object(Obj[83],"70a"); }
    if (lang == 4) { name_object(Obj[83],"70a"); }
    if (lang == 5) { name_object(Obj[83],"70a"); }
    if (lang == 6) { name_object(Obj[83],"70a"); }
    }

  //Object 70c
  if (HideObj[84] == 0)
    {
  if (lang == 0)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 1)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 2)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 3)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 4)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 5)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }
  if (lang == 6)
    {
    Obj[84] = newobject("Text","GINANI PATTERNS",0,0.6,0.6,"PatternMaker");
    }

  current_point=addpoint((x[393]+-3),(y[393]+2),"LINE");
    if (lang == 0) { name_object(Obj[84],"70c"); }
    if (lang == 1) { name_object(Obj[84],"70c"); }
    if (lang == 2) { name_object(Obj[84],"70c"); }
    if (lang == 3) { name_object(Obj[84],"70c"); }
    if (lang == 4) { name_object(Obj[84],"70c"); }
    if (lang == 5) { name_object(Obj[84],"70c"); }
    if (lang == 6) { name_object(Obj[84],"70c"); }
    }
  offset_mark(80, CheckToMetric(0 + Var[52]/1));
  group(current_selection);
  deselect(current_selection);

  }

Flow2View5()
  {
  do_counter=0;
  do_max=0;
  if (is_function("macgen_write"))
    {
    macgen_write("Flow2View5");
    }
  Flow2View5Points();
  }

Flow2View5Points()
{
  //Start
  x[0]=0;
y[0]=0;

  //7a
  x[392]=x[0]+Var[18];
y[392]=y[0];
  //7b
  x[393]=x[392];
y[393]=y[392]+Var[49]/-3+1;
  //7c
  x[394]=x[393]+Var[46]/-1;
y[394]=y[393];
  //7d
  x[395]=x[393]+Var[45];
y[395]=y[393];
  //7e
  LinePointDist(396, 394, 393, 392,  Var[46]  + 0, 0);

  //7f
  LinePointDist(397, 393, 395, 392,  Var[45]  + 0, 1);

  //7g
  x[398]= (x[397]+x[392])/2;
y[398]=(y[397]+y[392])/2;

  //7h
  x[399]= (x[392]+x[396])/2;
y[399]=(y[392]+y[396])/2;

  //7i
  right_ang(400, 398, 392,  + -0.5, 0);

  //7j
  right_ang(401, 399, 392,  + 0.5, 1);

  //7k
  x[402]= (x[401]+x[392])/2;
y[402]=(y[401]+y[392])/2;

  //7l
  x[403]= (x[396]+x[401])/2;
y[403]=(y[396]+y[401])/2;

  //7m
  x[404]= (x[400]+x[392])/2;
y[404]=(y[400]+y[392])/2;

  //7n
  x[405]= (x[397]+x[400])/2;
y[405]=(y[397]+y[400])/2;

  //7o
  x[406]=x[392];
y[406]=y[392]+Var[12]/-1;
  //7p
  x[407] = x[402];
y[407] = y[392];

  //7q
  x[408] = x[400];
y[408] = y[392];

  //7s
  x[409] = x[405];
y[409] = y[397];

  //7t
  x[410] = x[403];
y[410] = y[396];

  //7u
  x[411] = x[396];
y[411] = y[406];

  //7v
  x[412] = x[397];
y[412] = y[406];

  //7w
  x[413]= (x[411]+x[406])/2;
y[413]=(y[411]+y[406])/2;

  //7x
  x[414]= (x[411]+x[413])/2;
y[414]=(y[411]+y[413])/2;

  //7y
  x[415]= (x[406]+x[412])/2;
y[415]=(y[406]+y[412])/2;

  //7z
  x[416]= (x[415]+x[412])/2;
y[416]=(y[415]+y[412])/2;

  //7s1
  x[417]=x[409];
y[417]=y[409]+-0.75;
  //7s2
  right_ang(418, 404, 392,  + 0.625, 0);

  //7s3
  x[419]=x[408]+-0.25;
y[419]=y[408];
  //MoveStart
  x[420]=x[0]+23.184324368117;
y[420]=y[0]+-5.73844884488449;
  //MoveEnd
  x[421]=x[0]+23.0935652922094;
y[421]=y[0]+-5.23927392739274;
  //7t(2)
  x[422] = x[410] + x[421] - x[420] ;
y[422] = y[410] + y[421] - y[420] ;

  //MoveStart(2)
  x[423]=x[0]+32.3056114968299;
y[423]=y[0]+-0.20214521452145;
  //MoveEnd(2)
  x[424]=x[0]+31.8971956552457;
y[424]=y[0]+0.0247524752475267;
  //7s3(2)
  x[425] = x[419] + x[424] - x[423] ;
y[425] = y[419] + y[424] - y[423] ;

  //8a
  x[426]= (x[397]+x[416])/2;
y[426]=(y[397]+y[416])/2;

  //8b
  x[427]= (x[396]+x[414])/2;
y[427]=(y[396]+y[414])/2;

  //8c
  cont(396, 427, 428, +-2);

  //8d
  cont(397, 426, 429, +-2);

  //8e
  x[430]= (x[429]+x[416])/2;
y[430]=(y[429]+y[416])/2;

  //8f
  x[431]= (x[428]+x[414])/2;
y[431]=(y[428]+y[414])/2;

  //8d1
  x[432] = x[413];
y[432] = y[428];

  //8d2
  x[433] = x[406];
y[433] = y[428];

  //8d3
  x[434] = x[415];
y[434] = y[428];

  //8d4
  x[435] = x[434];
y[435] = y[431];

  //8d5
  x[436] = x[433];
y[436] = y[431];

  //8d6
  x[437] = x[413];
y[437] = y[431];

  }

Flow2View5Objects()
{
  }


mark(double pass_index)
 {
  if (Obj[pass_index]==0)
    {
    return;
    }
  Obj[pass_index]=marker_piece(Obj[pass_index],1);
  Mrk[marker_count] = Obj[pass_index];
  marker_count = marker_count + 1;
 }

offset_mark(double pass_index, double value)
 {
  point pnt, test;
  double save_x, save_y;

  if (Obj[pass_index]==0)
    {
    current_selection=newselection("OBJECT");
    return;
    }

  if (value != 0)
    {
    current_selection=newselection("OBJECT");
    select(current_selection,Obj[pass_index]);
    sel_push(current_selection);
    var_push(value);
    run_command("OFFSET");
    deselect(current_selection);
    Mrk[marker_count] = marker_piece(last_obj(),1);
    current_selection=newselection("OBJECT");
    select(current_selection, Mrk[marker_count]);
    select(current_selection, Obj[pass_index]);
    marker_count = marker_count + 1;
    }
  else
    {
    Obj[pass_index]=marker_piece(Obj[pass_index],1);
    Mrk[marker_count] = Obj[pass_index];
    current_selection=newselection("OBJECT");
    select(current_selection, Mrk[marker_count]);
    marker_count = marker_count + 1;
    }
 }
offset(double pass_index, double value)
 {
  point pnt, test;
  double save_x, save_y;
  if (Obj[pass_index]==0)
    {
    current_selection=newselection("OBJECT");
    return;
    }

  if (value != 0)
    {
    current_selection=newselection("OBJECT");
    select(current_selection,Obj[pass_index]);
    sel_push(current_selection);
    var_push(value);
    run_command("OFFSET");
    deselect(current_selection);
    current_selection=newselection("OBJECT");
    select(current_selection, last_obj());
    select(current_selection, Obj[pass_index]);
    }
  else
    {
    current_selection=newselection("OBJECT");
    select(current_selection, Obj[pass_index]);
    }
 }

double t0[2], t1[2];
double ftc[2];
double xar[13], yar[13];
double rx, ry;

arclength(double start, double corner, double end)  
{  
  double ct, last_x, last_y; double a_dist;
  last_x = x[start];
  last_y = y[start];
  a_dist=0; fts(start, corner, end, 0);
  for (ct=1; ct < 12; ct = ct + 1)
    {
    fts(start, corner, end, ct);
    a_dist = a_dist + distance(rx, ry, last_x, last_y);
    last_x=rx; last_y=ry;
    }   
  return a_dist;
} 
  
calc_if(double top, double bottom)
{
  if (Var[bottom] != 0)
    {
    return Var[top]/Var[bottom];
    }
  return 0;
}
  
cont (double cstart, double cend, double cdest, double cdist)
{
  double ang;
  ang=angle(x[cstart],y[cstart], x[cend], y[cend]);
  polar(x[cend],y[cend],ang,cdist);
  x[cdest]=getresultx();
  y[cdest]=getresulty();
}

  
LineArcIntersect(double start, double corner, double end, double lstart, double lend, double dest)
{
  x[dest]=0;
  y[dest]=0;
  if (arc_line_intersect(x[start], y[start], x[corner], y[corner], x[end], y[end], x[lstart], y[lstart], x[lend], y[lend], 1))
    {
    x[dest]=getresultx();
    y[dest]=getresulty();
    }
}

  
ArcArcIntersect(double start, double corner, double end, double a2start, double a2corner, double a2end, double dest)
{
  x[dest]=0;
  y[dest]=0;
  if (arc_arc_intersect(x[start], y[start], x[corner], y[corner], x[end], y[end], x[a2start], y[a2start], x[a2corner], y[a2corner], x[a2end], y[a2end],1))
    {
    x[dest]=getresultx();
    y[dest]=getresulty();
    }
}

  
LinePointDist(double dest, double line_start, double line_end, double from, double dist, double clockwise)
{
  double calc_dist, ang;
  LinePnt(dest, line_start, line_end, from);
  calc_dist=distance(x[from],y[from],x[dest],y[dest]);
  if (dist <= calc_dist)
    {
    x[dest] = 0;
    y[dest] = 0;
    }
  else
    {
    calc_dist=sqrt(dist*dist-calc_dist*calc_dist);
    ang=angle(x[from],y[from],x[dest],y[dest]);
    if (clockwise==1)
      {
      ang=ang+3.14159/2;
      }
    if (clockwise!=1)
      {
      ang=ang-3.14159/2;
      }
    x[dest] = x[dest] + calc_dist*cos(ang);
    y[dest] = y[dest] + calc_dist*sin(ang);
    }
}

  
Dart(double dest, double start, double end, double dist2, double dir)
{
  double dist, ang, dx, dy, h;
  dx=x[start]-x[end];
  dy=y[start]-y[end];
  dist=sqrt(dx*dx+dy*dy);
  h=sqrt((dist*dist)+(dist2/2)*(dist2/2));
  ang=atan(h,(dist2/2));
  if (dir==0)
    {
    ang=ang+angle(x[start], y[start], x[end], y[end]);
    }
  if (dir!=0)
    {
    ang=angle(x[start], y[start], x[end], y[end])-ang;
    }
  x[dest]=x[start]+dist2*cos(ang);
  y[dest]=y[start]+dist2*sin(ang);
}

  
LinePnt(double dest, double line_start, double line_end, double from)
{
  double v2x, v2y;
  double v1x, v1y;
  double dot;
  double norm2;
  v1x= x[from] - x[line_start];
  v1y= y[from] - y[line_start];
  v2x = x[line_end]-x[line_start];
  v2y = y[line_end]-y[line_start];
  dot = v1x * v2x + v1y * v2y;
  norm2 = sqrt(v2x * v2x + v2y * v2y);
  if (norm2 == 0)
    {
    x[dest] = x[line_start];
    y[dest] = y[line_start];
    }
  else
    {
    x[dest] = x[line_start] + dot * v2x / (norm2*norm2);
    y[dest] = y[line_start] + dot * v2y / (norm2*norm2);
    }
}
  
right_ang(double dest, double start, double end, double dist, double clockwise)
{
  double ang;
  ang=angle(x[start], y[start], x[end], y[end]);
  if (clockwise)
    {
    ang=ang + 3.14159/2;
    }
  if (!clockwise)
    {
    ang=ang - 3.14159/2;
    }
  x[dest]=x[start]+dist*cos(ang);
  y[dest]=y[start]+dist*sin(ang);
}

  
Mirror(double dest, double from, double line_start, double line_end)
{
  double v2x, v2y;
  double v1x, v1y;
  double dot;
  double norm2;
  v1x= x[from] - x[line_start];
  v1y= y[from] - y[line_start];
  v2x = x[line_end]-x[line_start];
  v2y = y[line_end]-y[line_start];
  dot = v1x * v2x + v1y * v2y;
  norm2 = sqrt(v2x * v2x + v2y * v2y);
  if (norm2 == 0)
    {
    x[dest] = x[line_start];
    y[dest] = y[line_start];
    }
  else
    {
    x[dest] = x[line_start] + dot * v2x / (norm2*norm2);
    y[dest] = y[line_start] + dot * v2y / (norm2*norm2);
    }
   x[dest]= x[from] + 2*( x[dest] - x[from]);
   y[dest]= y[from] + 2*( y[dest] - y[from]);
}

  
Rotate(double obj_numb, double start, double end, double pass_angle)
{
  double dist, ang;
  dist=distance(x[start], y[start], x[end], y[end]);
  if (dist > 0.01)
  {
    ang=(pass_angle*3.14159)/180 + angle(x[start], y[start], x[end], y[end]);
  }
  else
  {
    ang=0;
  }
  x[obj_numb]=x[start] + dist*cos(ang);
  y[obj_numb]=y[start] + dist*sin(ang);
}
  
RotDist(double obj_numb, double start, double end, double to_rot, double rdist)
{
  double dist, ang, ang2;
  dist=distance(x[start], y[start], x[end], y[end]);
  if (dist > 0.01)
  {
    ang2 = 2*asin(rdist/(2*dist));
    ang=angle(x[start], y[start], x[to_rot], y[to_rot]);
    dist=distance(x[start], y[start], x[to_rot], y[to_rot]);
    x[obj_numb]=x[start] + dist*cos(ang+ang2);
    y[obj_numb]=y[start] + dist*sin(ang+ang2);
  }
  else
  {
    x[obj_numb]=x[to_rot];
    y[obj_numb]=y[to_rot];
  }
}

  
ResizeX(double dest, double first, double second, double pass_scale)
{
  double dx, dy;
  dx=x[first]-x[second];
  dy=y[first]-y[second];
  x[dest]=x[first] - dx*pass_scale;
  y[dest]=y[first] - dy*pass_scale;
}

  
ResizeXY(double dest, double first, double second, double pass_xscale, double pass_yscale)
{
  double dx, dy;
  dx=x[first]-x[second];
  dy=y[first]-y[second];
  x[dest]=x[first] - dx*pass_xscale;
  y[dest]=y[first] - dy*pass_yscale;
}

  
OffsetDistance(double previous, double base, double next, double target, double odistp, double odistn, double iside)
  {
  double prev_ang, next_ang, temp_ang;
  double sin_of_ang, sin_of_temp;
  double off_dist;

  prev_ang = angle(x[base], y[base], x[previous], y[previous]);
  next_ang = angle(x[base], y[base], x[next],y[next]);
  prev_ang = normalizeangle(prev_ang);
  next_ang = normalizeangle(next_ang);
  if (prev_ang>next_ang)
    { temp_ang=(prev_ang + next_ang)/2; }
  else
    { temp_ang=(prev_ang + next_ang)/2 + 3.14159; }
  if (iside > 0)
    { temp_ang = temp_ang + 3.14159; }
  temp_ang = normalizeangle(temp_ang);
  sin_of_ang=sin(prev_ang - temp_ang);
  if (sin_of_ang < 0)
    { sin_of_ang = -sin_of_ang; }
  if (sin_of_ang < 0.1)
    { off_dist=odistp; }
  else
    { off_dist=odistp/sin_of_ang; }
  polar(x[base], y[base], temp_ang, off_dist);
  x[target] = getresultx();
  y[target] = getresulty();
  if (sin_of_ang >= 0.1)
    {
    sin_of_temp = sin(next_ang - prev_ang);
    if (sin_of_temp < 0)
      { sin_of_temp = -sin_of_temp; }
    if ( sin_of_temp >= 0.1 )
      {
      polar( x[target], y[target], prev_ang + (1 - iside) * 3.14159 , (odistn - odistp)/sin_of_temp );
      x[target] = getresultx();
      y[target] = getresulty();
      }
    }
}
  
// These global variables are used by fts for repeated calls.
	double A1, A2, B1, B2;  //transformation vectors
	double sx, sy, cx, cy, ex, ey;

fts(double start, double corner, double end, double pos)
{
  if (pos<1)
  {
  rx=x[start];
  ry=y[start];
  }
  else { if (pos<2)
  {
  sx = x[start];
  sy = y[start];
  cx = x[corner];
  cy = y[corner];
  ex = x[end];
  ey = y[end];

  A1=cx - sx;
  A2=cy - sy;
  B1=cx - ex;
  B2=cy - ey;

  A1=-A1;
  B1=-B1;
  A2=-A2;
  B2=-B2;

  t0[0]=A1;
  t0[1]=B1;
  t1[0]=A2;
  t1[1]=B2;

  ftc[0]= cx + (t0[0] + t0[1]);
  ftc[1]= cy + (t1[0] + t1[1]);

  rx = t0[0]*(xar[pos])+t0[1]*(yar[pos])+ ftc[0];
  ry = t1[0]*(xar[pos])+t1[1]*(yar[pos])+ ftc[1];
  }

  else {if (pos>10)
  {
  rx=x[end];
  ry=y[end];
  }
  else
  {
  rx = t0[0]*(xar[pos])+t0[1]*(yar[pos])+ ftc[0];
  ry = t1[0]*(xar[pos])+t1[1]*(yar[pos])+ ftc[1];
  }}}
}

init_xarc_array()
{
  // Must be called before calling fts().  This routine
  // sets the values in an array of sines and cosines.

  // You only need to call this routine once.

  double ang_start, ang_end, step, theta, ct;
  double XARC_PIECES;
  XARC_PIECES = 12;

  ang_start = -3.14159/2;
  ang_end= -3.14159;

  ct=0;

  step= (ang_end - ang_start)/(XARC_PIECES-1);
  for (theta=ang_start; ct < XARC_PIECES; theta = theta + step)
  {
  xar[ct] = cos(theta);
  yar[ct] = sin(theta);
  ct=ct+1;
  }
  //end init_xarc_array
}

CheckToMetric(double pass)
  {
  if (metric==1)
    {
    pass=pass*2.54;
    }
  return pass;
  }

CheckFromMetric(double pass)
  {
  if (metric==1)
    {
    pass=pass/2.54;
    }
  return pass;
  }